Z8674312PSC - 8-Bit 12MHz Z8 Microcontroller | Zilog
MPN: Z8674312PSC ✗ انتهى عمره الإنتاجيZ8674312PSC نظرة عامة
A microcontroller is a compact integrated circuit that combines a CPU core, program memory, data memory, and peripheral functions into one device. The Z8 belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. Compared with field-programmable devices, the one-time-programmable architecture allows the application program to be written once during manufacturing, reducing the need for external program storage in cost-sensitive embedded products.
Key device characteristics include the Z8 8-bit core, a 12 MHz maximum operating frequency, 8 KB organized as 8K x 8 OTP memory, 236 bytes of data RAM, and 32 I/O pins. External Bus Interface and External Memory Interface connectivity expand the available peripheral options for displays, memory devices, and external I/O. The device includes no ADC, so analog measurement requires an external converter or dedicated front-end circuit.
The CMOS Z8 architecture is suited to embedded control loops that combine timed switching, digital sensing, and actuator control. Its 32 I/O pins provide substantial board-level flexibility for keyboards, indicators, relays, and discrete logic. The 4.75 V to 5.25 V operating range is typical of established 5 V control platforms, although designers should verify timing and output levels against the complete system requirement rather than assume modern 3.3 V compatibility.
Typical uses include appliance controllers, industrial sequencers, test equipment, HVAC control panels, motor-control support circuits, and embedded peripheral boards. The 40-DIP package is particularly useful for prototype construction, repair work, and through-hole assembly where a socketed microcontroller allows straightforward replacement.
Designers should confirm the complete 40-pin signal assignment, oscillator connection, reset configuration, and programming procedure from the manufacturer datasheet before layout. Because the ROM is one-time programmable, the finished program image should be fully validated before the production programming step; a single incorrect write cannot be corrected in the field.
This product page consolidates the verified core specifications, package details, purchasing guidance, application guidance, and engineering considerations for engineers assessing the Z8674312PSC in legacy embedded designs.
بدائل مباشرة لـ Z8674312PSC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلZ8674312PSC الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit CMOS Microcontroller |
| Core Architecture | Z8 |
| عرض ناقل البيانات | 8 bit |
| أقصى تردد للساعة | 12 MHz |
| Program Memory Type | OTP ROM |
| Program Memory Size | 8 KB (8K x 8) |
| Data RAM Size | 236 bytes |
| Number of I/O Pins | 32 |
| Operating Supply Voltage Range | 4.75 V to 5.25 V |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | +70 °C |
| Package Type | 40-pin DIP |
| نمط التركيب | Through Hole |
| Package Dimensions | 0.620 inch (15.75 mm) body width |
| ADC Resolution | No ADC |
| External Bus Interface | Supported |
| External Memory Interface | Supported |
| Shipping Packaging | Tube |
دليل تكوين أطراف Z8674312PSC 0.620 inch (15.75 mm) body width
تكوين الأطراف لـ Z8674312PSC (حزمة 0.620 inch (15.75 mm) body width). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ Z8674312PSC.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
Z8674312PSC مناسب لـ 6 التطبيقs: Industrial Control Panels, Appliance and HVAC Sequencing, Test and Measurement Fixtures, Keyboard and Peripheral Controllers, Through-Hole Repair and Retrofit, Embedded Motor and Relay Control.
Industrial Control Panels
The Z8674312PSC is well matched to established 5 V industrial panels because its 32 I/O pins can drive indicator lamps, limit switches, relay drivers, and panel key inputs. The 12 MHz Z8 core supports deterministic sequencing without a separate external processor. External Bus Interface and External Memory Interface connectivity allow qualified expansion boards to be added, while the 0 °C to +70 °C specification targets indoor commercial equipment. Because the device has no ADC, sensor channels should use external interface circuitry and communicate processed results over the I/O or bus ports.
موصى به
Appliance and HVAC Sequencing
For appliance and HVAC sequencers, the Z8674312PSC can coordinate motor stages, relays, timers, and safety inputs from a single 8-bit controller. Its 236 bytes of RAM support compact state machines, while 8 KB of OTP ROM is adequate for fixed control logic that does not require field upgrades. The 4.75 V to 5.25 V supply range aligns with many established appliance control boards. Firmware must validate all outputs before enabling them because OTP programming cannot be reversed after the write cycle.
موصى به
Test and Measurement Fixtures
The Z8674312PSC can control legacy test fixtures where keypad sequences, pass/fail indicators, relay matrices, and handshake signals are required. Its 32 I/O pins reduce the need for external I/O expanders, and the 12 MHz clock provides a practical basis for timed measurement sequences. The through-hole 40-DIP package is convenient for socketed prototype boards, repair assemblies, and small production runs. Analog measurements require external converters because the controller provides no ADC, so analog front-end design should be planned separately.
موصى به
Keyboard and Peripheral Controllers
The Z8674312PSC can act as a dedicated keyboard, display, or peripheral controller when a host system needs additional discrete I/O. Its 8-bit bus and 32 available I/O lines support scanning, indicator control, and handshake logic, while External Memory Interface can serve suitable external memory devices. The 5 V operating range suits older host backplanes, but level translation may be required at modern 3.3 V boundaries. Firmware should include debouncing, timeout recovery, and clear fault reporting to keep peripheral failures from locking up the host system.
موصى به
Through-Hole Repair and Retrofit
The 40-pin DIP package makes the Z8674312PSC useful for repairing or retrofitting equipment that originally used a socketed through-hole controller. A DIP footprint simplifies mechanical replacement on older boards and avoids fine-pitch assembly during maintenance. The same feature demands careful attention to pin-1 orientation, socket quality, and lead-free soldering practices. Before substitution, confirm the exact ordering code, operating-temperature grade, oscillator arrangement, and firmware compatibility with the original system.
موصى به
Embedded Motor and Relay Control
The Z8674312PSC can manage relay and small-motor control sequences in legacy automation equipment because 32 I/O lines provide ample discrete output capacity. Timed acceleration, dwell, and interlock logic can run from its Z8 core at up to 12 MHz, and 8 KB of OTP ROM supports fixed sequencing routines. External drive transistors or motor drivers are still required because the microcontroller pins are control signals rather than power-stage outputs. Use isolation or flyback protection on inductive loads and disable outputs during reset and startup.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ Z8674312PSC — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Package | 40-pin DIP |
| Brand | Zilog |
| Core Architecture | Z8 |
| Data Bus Width | 8 bit |
| Maximum Clock Frequency | 12 MHz |
| Program Memory | 8 KB OTP ROM (8K x 8) |
| Data RAM | 236 bytes |
| Number of I/O Pins | 32 |
| Operating Supply Voltage | 4.75 V to 5.25 V |
| Operating Temperature | 0 °C to +70 °C |
| Mounting Style | Through Hole |
| ADC | Not integrated |
ملاحظات التصميم
Design the board around the specified 4.75 V to 5.25 V operating range and follow the manufacturer pinout and decoupling recommendations. Place the required ceramic bypass capacitor close to the device supply pins, with additional bulk capacitance near the board entry point if the supply wiring is long. Use separate return paths for switching loads so relay and motor currents do not flow through sensitive controller ground traces.
Keep the oscillator and reset paths short, and route high-current switching nodes away from the 40-pin DIP and any exposed I/O traces. Because the DIP package has long leads and comparatively large spacing, leave adequate copper and clearance for assembly accessibility. Confirm pin-1 orientation against both the schematic and PCB footprint before fabrication to avoid mirrored controller placement.
Treat the 8 KB OTP program memory as a write-once production step. Validate timing, output states, stack usage, interrupt behavior, and the complete programmed image before writing production units. Do not assume the related Z8674312ASG ordering code is interchangeable because its package designation differs from the DIP-40 target. Also add external circuitry for analog measurements because the controller has no integrated ADC.
معلومات الامتثال
The device is a commercial 0 °C to +70 °C controller rather than an automotive-qualified product. Compliance status must be confirmed for the exact ordering code and current manufacturer documentation.