Zilog

Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog

MPN: Z86E1505PSC ✗ انتهى عمره الإنتاجي
40-pin DIP Package 5 MHz Speed One-Time Programmable (OTP) Memory
الحد الأدنى للطلب: 1 |

Z86E1505PSC نظرة عامة

The Zilog, Inc. Z86E1505PSC is an 8-bit Z8 keyboard-controller microcontroller operating at 5 MHz, with 4 KB of One-Time Programmable program memory, 188 bytes of RAM, and 32 programmable I/O pins in a 40-pin DIP package. The device also integrates programmable LED drivers, a Power-On Reset circuit, and a Watchdog Timer for compact and dependable keyboard-scanning designs.

An OTP keyboard controller is a specialized microcontroller that scans switch inputs, applies debouncing and logic functions, drives indicator LEDs, and communicates with a host controller. It belongs to the hierarchy of 8-bit MCU, microcontroller, embedded controller, and semiconductor. The Z8 architecture combines straightforward firmware execution with dedicated keyboard-oriented peripherals, reducing external logic and simplifying layouts for wired or embedded human-interface devices.

The principal advantages of the Z86E1505PSC are its 5 MHz operating speed, 4K by 8 OTP program-memory organization, 188-byte RAM, and 32 programmable I/O lines. OTP memory is suitable for products whose firmware is finalized before deployment because it cannot be electrically rewritten in the field. The Watchdog Timer and Power-On Reset support dependable recovery and controlled startup, while the integrated LED drivers reduce the component count needed for status indication.

Externally, the device uses an external oscillator and provides the interface resources required for matrix-based keyboard scanning. Its 40-pin DIP package is easy to prototype, inspect, and service on through-hole industrial or educational assemblies. Unlike a general-purpose MCU that would require external LED drivers and additional reset support, this controller concentrates those functions in one device, allowing a smaller bill of materials and more direct keyboard firmware.

Typical uses include computer keyboards, keypad readers, access-control panels, laboratory control panels, and compact industrial keypads. It is particularly appropriate when a fixed function can be programmed once, the application needs deterministic key scanning and status indication, and through-hole construction is preferred for maintainability. Its 188-byte RAM provides working space for scan state, debounce counters, communication buffers, and configuration variables.

Designers should verify the oscillator requirements, key-scan architecture, and host-interface levels against the manufacturer datasheet before finalizing the PCB. Because program memory is one-time programmable, validate firmware and keyboard layouts thoroughly before production programming. Confirm all 40 package connections against the pin-description table rather than relying on general DIP numbering assumptions.

This product overview combines the controller's core memory, timing, I/O, and package characteristics with practical guidance for keyboard hardware. It also distinguishes verified functions from details requiring confirmation, helping engineers plan sourcing, firmware validation, PCB routing, and production programming without overlooking the architectural limits of an OTP MCU.

بدائل مباشرة لـ Z86E1505PSC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

Z86E1505PSC الحدود القصوى والخصائص الكهربائية

Product Type 8-bit keyboard-controller microcontroller
Processor Core Z8 8-bit core
أقصى تردد للساعة 5 MHz
Program Memory Type One-Time Programmable (OTP)
Program Memory Capacity 4 KB (4K x 8)
RAM Capacity 188 bytes
Programmable I/O Pins 32 pins
LED Drivers Integrated programmable LED drivers
Power-On Reset Integrated Power-On Reset (POR)
Watchdog Timer Integrated Watchdog Timer (WDT)
Oscillator Type External oscillator
Package Type 40-pin DIP
نوع التركيب Through-hole
Process Technology CMOS
حالة RoHS Non-compliant

دليل تكوين أطراف Z86E1505PSC 40-pin dip

تكوين الأطراف لـ Z86E1505PSC (حزمة 40-pin dip). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 40-pin dip لـ Z86E1505PSC

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ Z86E1505PSC.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

Z86E1505PSC مناسب لـ 6 التطبيقs: Computer Keyboard Controller, Industrial Keypad and Panel Input, Access-Control Keypad, Laboratory Control Panel, Embedded Human-Interface Device, Serviceable Through-Hole Controller.

🔧

Computer Keyboard Controller

The Z86E1505PSC fits a conventional matrix keyboard because it combines a 5 MHz Z8 core with 32 programmable I/O pins and integrated programmable LED drivers. Firmware can scan the switch matrix, apply debounce timing, maintain modifier-key state, and report encoded results to the host. Its 188-byte RAM is suitable for scan-state variables and short communication buffers, while the 4 KB OTP program memory supports a fixed, production-oriented keyboard firmware image. The 40-pin DIP package is particularly convenient for through-hole prototypes and repairable controller assemblies.

🏭

Industrial Keypad and Panel Input

The Z86E1505PSC is appropriate for an industrial keypad where a matrix of switches must be scanned reliably and panel indicators must be controlled locally. The 5 MHz operating rate supports time-based debounce and key-repeat logic, while 32 programmable I/O lines provide substantial scan and interface capacity. Integrated LED drivers reduce the need for separate indicator circuitry, and the Watchdog Timer can restart a stalled control path. Confirm the operating temperature and voltage limits against the keypad environment before production release.

🔒

Access-Control Keypad

A Z86E1505PSC-based access-control keypad can use one controller for switch scanning, status indication, and host reporting. The 4 KB OTP program memory is useful for a fixed credential-entry interface, while the 188-byte RAM can hold scan counters, debounce state, and short command or response buffers. Programmable LED drivers support visible lock, access, and error indications without expanding the logic footprint. Because OTP programming is irreversible, all keypad mapping, timeout behavior, and communication handling should be validated before units are programmed.

🧪

Laboratory Control Panel

The Z86E1505PSC can serve as the local controller in a laboratory instrument with a keypad, status LEDs, and a simple host or instrument bus. Its 5 MHz core is sufficient for deterministic matrix scanning and debounce, and the external oscillator allows the design team to select the timing source required by the system. The 188-byte RAM supports working variables without requiring an external memory device. Through-hole DIP construction is useful for educational and serviceable prototypes, but production products should confirm environmental limits and assembly requirements.

🧩

Embedded Human-Interface Device

The Z86E1505PSC is useful in a small embedded human-interface device that combines a keypad matrix, LED feedback, and a host communication function. Its 32 programmable I/O lines allow scanning resources to be shared with status outputs and interface signals, while integrated LED drivers simplify indicator design. The controller's 4 KB OTP program memory is appropriate for a fixed command set and scanning algorithm, and the 5 MHz clock rate supports responsive input handling. Validate signal levels, timing margins, and host protocol behavior against the datasheet.

🔧

Serviceable Through-Hole Controller

The Z86E1505PSC supports legacy and serviceable controller assemblies that benefit from a 40-pin DIP package rather than a leadless surface-mount format. Through-hole construction makes inspection, socket use, and component replacement straightforward in equipment where long product support cycles are common. The dedicated keyboard-controller resources allow the design to replace a generic MCU plus external indicator circuitry. Verify pin assignments, external clock requirements, and timing behavior against the manufacturer documentation, and plan OTP programming only after the complete hardware and firmware design is frozen.

What is the Z86E1505PSC?
The Z86E1505PSC is a Zilog 8-bit keyboard-controller MCU with a 5 MHz Z8 core, 4 KB of OTP program memory, 188 bytes of RAM, and 32 programmable I/O pins. According to the Zilog product description, it integrates programmable LED drivers, Power-On Reset, and a Watchdog Timer. It is supplied in a 40-pin DIP package for through-hole keyboard, keypad, and human-interface applications.
What are the key specifications of Z86E1505PSC that engineers should know?
The key Z86E1505PSC specifications are a 5 MHz Z8 core, 4 KB of one-time programmable memory organized as 4K x 8, 188 bytes of RAM, and 32 programmable I/O pins. Zilog identifies the device as a CMOS keyboard-controller MCU with programmable LED drivers, Power-On Reset, and a Watchdog Timer. The package is a 40-pin DIP, and the oscillator connection is external.
How much program memory does the Z86E1505PSC have?
The Z86E1505PSC provides 4 KB of One-Time Programmable program memory, organized as 4K x 8. According to the Zilog product listing, this nonvolatile firmware memory is programmed once and is not electrically rewritten during normal operation. Firmware, keyboard scanning logic, and communication routines should therefore be fully validated before the production programming step.
Does the Z86E1505PSC support LED indication and system recovery?
Yes, the Z86E1505PSC includes programmable LED drivers, a Power-On Reset circuit, and a Watchdog Timer. According to the Zilog product description, these integrated functions support key-status indication, controlled startup, and recovery from a stalled firmware path. They can reduce external component count and board area compared with a generic MCU implementation.
Where can I download the Z86E1505PSC datasheet PDF?
The Z86E1505PSC datasheet information is available through the Zilog Z86E1505PSC datasheet page linked in the product documentation section of this page. The manufacturer document identifies the device as a CMOS Z8 8-bit OTP keyboard controller. Use its package drawing and pin-description table to assign all connections in a 40-pin DIP footprint before fabrication.
Where can I find the Z86E1505PSC pinout?
The Z86E1505PSC pinout is documented in the manufacturer datasheet package drawing and pin-description table. The verified component information identifies a 40-pin DIP package, but it does not provide the complete numbered pin list on this page. Use the datasheet as the authoritative source when routing the external oscillator, keyboard matrix, LED outputs, host interface, power, and ground.
What is the Z86E1505PSC equivalent for keyboard-controller designs?
The Z86E1505PSC itself is the reference device for this family, but no pin-compatible replacement was identified in the cross-reference results. Exact substitution requires a 40-pin DIP footprint, compatible Z8 firmware behavior, sufficient OTP program memory, matching I/O functions, and equivalent LED-driver and watchdog resources. A device that merely performs similar matrix scanning is not necessarily a drop-in replacement.
Can the Z86E1505PSC replace a generic 8-bit keyboard MCU?
Not automatically, because replacement requires more than matching the CPU clock and memory size. The candidate must use the same 40-pin DIP pinout and provide equivalent keyboard-scan, host-interface, LED-driver, reset, oscillator, and watchdog connections. It must also fit the existing 4 KB OTP programming workflow and meet the original system's timing and electrical requirements.
When should I choose the Z86E1505PSC over a general-purpose MCU?
Choose the Z86E1505PSC when a product primarily scans keys, drives status LEDs, and benefits from a fixed 5 MHz, 4 KB-OTP architecture with 188 bytes of RAM. A general-purpose MCU is preferable when the design needs flash memory, substantially more RAM, multiple advanced peripherals, or a broader software ecosystem. For this controller, OTP durability and integration can outweigh firmware flexibility.
Is the Z86E1505PSC suitable for industrial keypads?
The Z86E1505PSC can suit industrial keypad designs that use a dedicated 8-bit scanner, fixed firmware, through-hole construction, and host-controlled status indication. Its integrated LED drivers, Power-On Reset, and Watchdog Timer simplify the required hardware. Verify the operating-voltage and temperature limits in the datasheet against the keypad's environmental requirements before releasing the design.
What is the lead time for the Z86E1505PSC?
The current lead time for the Z86E1505PSC should be requested through the Request a Quote form on this page. Legacy-programmed OTP controllers can have constrained allocation depending on remaining inventory and manufacturer status, so production schedules should be confirmed before committing to a build. Include the required quantity, package suffix, programming method, and target delivery date in the request.
Is the Z86E1505PSC in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a product listing. The Z86E1505PSC is a legacy 8-bit OTP keyboard controller, and availability may depend on remaining factory inventory, programmed-part requirements, and order volume. Submit the exact MPN and quantity so the production schedule can be checked against actual supply.
Where can I buy the Z86E1505PSC?
Use the Request a Quote form on this page to request Z86E1505PSC availability, production quantities, and delivery scheduling for the 40-pin DIP package. Include programming requirements and any target date in the request. This approach provides a direct quotation tied to the exact MPN rather than an estimate based on a different package suffix or programmable configuration.
What is the price of the Z86E1505PSC?
The current Z86E1505PSC quotation should be obtained through the Request a Quote form on this page. The quote should reflect the exact 40-pin DIP MPN, requested quantity, OTP programming requirements, and any unprogrammed-versus-programmed supply condition. Use the form for commercial review so the production quantity and delivery schedule can be considered together.
How does the Z86E1505PSC compare with a generic 8-bit MCU?
The Z86E1505PSC is optimized for keyboard-controller duties at 5 MHz with 4 KB of OTP memory, 188 bytes of RAM, and 32 programmable I/O pins. A generic 8-bit MCU may offer reusable flash memory, more RAM, and broader peripherals, but it may require external LED drivers and greater firmware setup. The dedicated controller is attractive when its fixed keyboard function matches the product.
Can I use the Z86E1505PSC for a computer keyboard?
Yes, the Z86E1505PSC is identified specifically as a keyboard controller and is suitable for scanning keyboard matrices and driving status indicators. Its 32 programmable I/O pins, integrated LED drivers, 5 MHz processing rate, and external oscillator support make it appropriate for conventional keyboard-controller duties. Final signal compatibility still requires checking the host interface and datasheet pin assignments.

بيانات مرجعية هندسية لـ Z86E1505PSC — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the Z86E1505PSC when the end product is primarily a keyboard, keypad, or fixed human-interface controller that benefits from a 5 MHz Z8 core, 4 KB of OTP firmware storage, 188 bytes of RAM, and 32 programmable I/O lines. Its integrated LED drivers, Power-On Reset, and Watchdog Timer can reduce external circuitry and make the design suitable for through-hole assemblies. Choose a general-purpose MCU instead when the product needs reusable flash memory, substantially more RAM, broader communication peripherals, or frequent firmware revisions after manufacture. No pin-compatible substitute was established, so changing the MCU requires a complete recheck of the 40-pin footprint, external clock, LED-driver circuitry, programming process, host interface, and firmware timing rather than a simple last-minute substitution.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Zilog, Inc.
Package 40-pin DIP
Processor Core Z8 8-bit core
Maximum Clock Frequency 5 MHz
Program Memory 4 KB OTP (4K x 8)
RAM Capacity 188 bytes
Programmable I/O Pins 32 pins
Integrated Functions Programmable LED drivers, Power-On Reset, and Watchdog Timer
Oscillator Type External oscillator

أبرز الفروقات

  • Dedicated keyboard-controller integration (مقابلGeneral-purpose 8-bit MCU)
  • OTP architecture for fixed production firmware (مقابلGeneral-purpose flash-memory MCU)
  • Serviceable 40-pin DIP construction (مقابلLeadless surface-mount MCU)

ملاحظات التصميم

Treat the 4 KB OTP program memory as a one-time manufacturing step. Complete switch mapping, debounce timing, host-protocol tests, and indicator behavior before production programming. A single late firmware change can require replacement devices because the Z86E1505PSC program memory cannot be electrically rewritten during normal use.

Assign every physical connection from the manufacturer pin-description table rather than inferring function solely from DIP pin numbers. Pay particular attention to power, ground, external oscillator, programming, reset, host-interface, keyboard-matrix, and LED-driver connections. Preserve the specified 40-pin footprint and verify clearance around the through-hole package.

Decouple the controller near its supply pins using the capacitance and layout recommendations in the manufacturer datasheet. Provide clean return paths for keyboard-matrix and LED-driver currents, and avoid routing high-current indicator loads through sensitive scan lines. Validate the complete power range under worst-case scanning and indicator activity before production.

Keep the external oscillator connection and its return path compact, with surrounding ground arranged to minimize pickup from switching nodes. Maintain separation between matrix scan lines and indicator-drive paths where practical. If an indicator shares a scanned key line, verify the controller's intended drive and sensing method before laying out the board.

معلومات الامتثال

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The component listing identifies the Z86E1505PSC as RoHS non-compliant. No additional certification conclusions should be inferred from that statement.

تم التحقق من البيانات في: 2026-11-17 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

Z86E1505PSC datasheet Z86E1505PSC datasheet pdf Z86E1505PSC pinout Z86E1505PSC specifications Z86E1505PSC equivalent Z86E1505PSC replacement Z86E1505PSC drop-in substitute Z86E1505PSC price Z86E1505PSC stock Zilog Z86E1505PSC Z86E1505PSC 40 pin DIP Z86E1505PSC keyboard controller Z86E1505PSC 5MHz 4KB OTP Z86E1505PSC programming

المكونات والمصطلحات ذات الصلة

Zilog, Inc. Z86E1505PSC Z8 8-bit core 8-bit microcontroller keyboard controller embedded controller semiconductor One-Time Programmable memory 4K x 8 OTP program memory 188-byte RAM 32 programmable I/O pins programmable LED drivers Power-On Reset Watchdog Timer external oscillator CMOS 40-pin DIP DIP package family through-hole package surface-mount technology hierarchy 5 MHz clock keyboard matrix scanning matrix keyboard industrial keypad host interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر