Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog
料号: Z86E1505PSC ✗ 停产Z86E1505PSC 概述
An OTP keyboard controller is a specialized microcontroller that scans switch inputs, applies debouncing and logic functions, drives indicator LEDs, and communicates with a host controller. It belongs to the hierarchy of 8-bit MCU, microcontroller, embedded controller, and semiconductor. The Z8 architecture combines straightforward firmware execution with dedicated keyboard-oriented peripherals, reducing external logic and simplifying layouts for wired or embedded human-interface devices.
The principal advantages of the Z86E1505PSC are its 5 MHz operating speed, 4K by 8 OTP program-memory organization, 188-byte RAM, and 32 programmable I/O lines. OTP memory is suitable for products whose firmware is finalized before deployment because it cannot be electrically rewritten in the field. The Watchdog Timer and Power-On Reset support dependable recovery and controlled startup, while the integrated LED drivers reduce the component count needed for status indication.
Externally, the device uses an external oscillator and provides the interface resources required for matrix-based keyboard scanning. Its 40-pin DIP package is easy to prototype, inspect, and service on through-hole industrial or educational assemblies. Unlike a general-purpose MCU that would require external LED drivers and additional reset support, this controller concentrates those functions in one device, allowing a smaller bill of materials and more direct keyboard firmware.
Typical uses include computer keyboards, keypad readers, access-control panels, laboratory control panels, and compact industrial keypads. It is particularly appropriate when a fixed function can be programmed once, the application needs deterministic key scanning and status indication, and through-hole construction is preferred for maintainability. Its 188-byte RAM provides working space for scan state, debounce counters, communication buffers, and configuration variables.
Designers should verify the oscillator requirements, key-scan architecture, and host-interface levels against the manufacturer datasheet before finalizing the PCB. Because program memory is one-time programmable, validate firmware and keyboard layouts thoroughly before production programming. Confirm all 40 package connections against the pin-description table rather than relying on general DIP numbering assumptions.
This product overview combines the controller's core memory, timing, I/O, and package characteristics with practical guidance for keyboard hardware. It also distinguishes verified functions from details requiring confirmation, helping engineers plan sourcing, firmware validation, PCB routing, and production programming without overlooking the architectural limits of an OTP MCU.
直接替换替代料: Z86E1505PSC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料Z86E1505PSC 最大额定值与电气特性
| Product Type | 8-bit keyboard-controller microcontroller |
| Processor Core | Z8 8-bit core |
| 最大时钟频率 | 5 MHz |
| Program Memory Type | One-Time Programmable (OTP) |
| Program Memory Capacity | 4 KB (4K x 8) |
| RAM Capacity | 188 bytes |
| Programmable I/O Pins | 32 pins |
| LED Drivers | Integrated programmable LED drivers |
| Power-On Reset | Integrated Power-On Reset (POR) |
| Watchdog Timer | Integrated Watchdog Timer (WDT) |
| Oscillator Type | External oscillator |
| Package Type | 40-pin DIP |
| 安装类型 | Through-hole |
| Process Technology | CMOS |
| RoHS 状态 | Non-compliant |
Z86E1505PSC 40-pin dip 引脚配置指南
Z86E1505PSC(40-pin dip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: Z86E1505PSC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z86E1505PSC 适用于 6 应用s: Computer Keyboard Controller, Industrial Keypad and Panel Input, Access-Control Keypad, Laboratory Control Panel, Embedded Human-Interface Device, Serviceable Through-Hole Controller.
Computer Keyboard Controller
The Z86E1505PSC fits a conventional matrix keyboard because it combines a 5 MHz Z8 core with 32 programmable I/O pins and integrated programmable LED drivers. Firmware can scan the switch matrix, apply debounce timing, maintain modifier-key state, and report encoded results to the host. Its 188-byte RAM is suitable for scan-state variables and short communication buffers, while the 4 KB OTP program memory supports a fixed, production-oriented keyboard firmware image. The 40-pin DIP package is particularly convenient for through-hole prototypes and repairable controller assemblies.
推荐
Industrial Keypad and Panel Input
The Z86E1505PSC is appropriate for an industrial keypad where a matrix of switches must be scanned reliably and panel indicators must be controlled locally. The 5 MHz operating rate supports time-based debounce and key-repeat logic, while 32 programmable I/O lines provide substantial scan and interface capacity. Integrated LED drivers reduce the need for separate indicator circuitry, and the Watchdog Timer can restart a stalled control path. Confirm the operating temperature and voltage limits against the keypad environment before production release.
推荐
Access-Control Keypad
A Z86E1505PSC-based access-control keypad can use one controller for switch scanning, status indication, and host reporting. The 4 KB OTP program memory is useful for a fixed credential-entry interface, while the 188-byte RAM can hold scan counters, debounce state, and short command or response buffers. Programmable LED drivers support visible lock, access, and error indications without expanding the logic footprint. Because OTP programming is irreversible, all keypad mapping, timeout behavior, and communication handling should be validated before units are programmed.
推荐
Laboratory Control Panel
The Z86E1505PSC can serve as the local controller in a laboratory instrument with a keypad, status LEDs, and a simple host or instrument bus. Its 5 MHz core is sufficient for deterministic matrix scanning and debounce, and the external oscillator allows the design team to select the timing source required by the system. The 188-byte RAM supports working variables without requiring an external memory device. Through-hole DIP construction is useful for educational and serviceable prototypes, but production products should confirm environmental limits and assembly requirements.
推荐
Embedded Human-Interface Device
The Z86E1505PSC is useful in a small embedded human-interface device that combines a keypad matrix, LED feedback, and a host communication function. Its 32 programmable I/O lines allow scanning resources to be shared with status outputs and interface signals, while integrated LED drivers simplify indicator design. The controller's 4 KB OTP program memory is appropriate for a fixed command set and scanning algorithm, and the 5 MHz clock rate supports responsive input handling. Validate signal levels, timing margins, and host protocol behavior against the datasheet.
推荐
Serviceable Through-Hole Controller
The Z86E1505PSC supports legacy and serviceable controller assemblies that benefit from a 40-pin DIP package rather than a leadless surface-mount format. Through-hole construction makes inspection, socket use, and component replacement straightforward in equipment where long product support cycles are common. The dedicated keyboard-controller resources allow the design to replace a generic MCU plus external indicator circuitry. Verify pin assignments, external clock requirements, and timing behavior against the manufacturer documentation, and plan OTP programming only after the complete hardware and firmware design is frozen.
推荐
推荐产品汇总
工程参考数据: Z86E1505PSC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Zilog, Inc. |
| Package | 40-pin DIP |
| Processor Core | Z8 8-bit core |
| Maximum Clock Frequency | 5 MHz |
| Program Memory | 4 KB OTP (4K x 8) |
| RAM Capacity | 188 bytes |
| Programmable I/O Pins | 32 pins |
| Integrated Functions | Programmable LED drivers, Power-On Reset, and Watchdog Timer |
| Oscillator Type | External oscillator |
关键差异点
- Dedicated keyboard-controller integration (对比 General-purpose 8-bit MCU)
- OTP architecture for fixed production firmware (对比 General-purpose flash-memory MCU)
- Serviceable 40-pin DIP construction (对比 Leadless surface-mount MCU)
设计说明
Treat the 4 KB OTP program memory as a one-time manufacturing step. Complete switch mapping, debounce timing, host-protocol tests, and indicator behavior before production programming. A single late firmware change can require replacement devices because the Z86E1505PSC program memory cannot be electrically rewritten during normal use.
Assign every physical connection from the manufacturer pin-description table rather than inferring function solely from DIP pin numbers. Pay particular attention to power, ground, external oscillator, programming, reset, host-interface, keyboard-matrix, and LED-driver connections. Preserve the specified 40-pin footprint and verify clearance around the through-hole package.
Decouple the controller near its supply pins using the capacitance and layout recommendations in the manufacturer datasheet. Provide clean return paths for keyboard-matrix and LED-driver currents, and avoid routing high-current indicator loads through sensitive scan lines. Validate the complete power range under worst-case scanning and indicator activity before production.
Keep the external oscillator connection and its return path compact, with surrounding ground arranged to minimize pickup from switching nodes. Maintain separation between matrix scan lines and indicator-drive paths where practical. If an indicator shares a scanned key line, verify the controller's intended drive and sensing method before laying out the board.
合规信息
The component listing identifies the Z86E1505PSC as RoHS non-compliant. No additional certification conclusions should be inferred from that statement.