Z86E2112VSC - 8-Bit 12MHz OTP Microcontroller | Zilog
MPN: Z86E2112VSC ✓ نشطZ86E2112VSC نظرة عامة
An 8-bit microcontroller is a programmable semiconductor that executes instructions from a processor architecture designed around an 8-bit data bus. The Z8 family combines a compact controller core, embedded memory, serial interfaces, and general-purpose I/O in one integrated circuit. Z86E2112VSC belongs to the broader hierarchy of 8-bit MCU, embedded microcontroller, programmable controller, and semiconductor, making it suitable for small control systems that do not require a high-performance 32-bit processor.
The principal features include a 12 MHz maximum clock speed, 8 KB of OTP program memory, 236 x 8 bytes of RAM, and 32 I/O ports. OTP memory allows firmware to be programmed once after manufacturing, which is useful for production products whose control program is fixed and does not require field updates. The UART/USART interface enables serial communication with sensors, human-interface controllers, data-collection equipment, or another embedded controller.
The Z8 architecture integrates the processor core, program storage, data RAM, I/O, timers, and serial-interface functions on a single CMOS device. Operating from a 4.5 V to 5.5 V supply provides a conventional 5 V embedded-control environment. Because the program memory is OTP rather than mask-programmable ROM alone, the same commercial device can be programmed for different production configurations after assembly, subject to the one-time programming constraint.
Typical applications include industrial control panels, serial instrumentation, appliance controllers, communication interfaces, embedded timers, and compact peripheral controllers. Its 44-pin PLCC package provides 32 I/O pins for external signals, while the 12 MHz clock rate supports responsive polling, debouncing, state-machine execution, and UART protocol handling. The relatively broad I/O count is particularly useful when a design needs multiple digital inputs and outputs around one controller.
Designers should treat OTP programming as a one-time production operation and protect the programming interface from unintended access after programming. Place the device's decoupling capacitor close to its supply pins, route clock and serial signals away from noisy switching nodes, and confirm the complete 44-pin PLCC footprint and pin assignments against the manufacturer datasheet before layout release. The PLCC package also requires attention to solder-joint geometry and thermal performance during assembly.
بدائل مباشرة لـ Z86E2112VSC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
Z86E2112VSG
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
Z86E2112VSC الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit CMOS microcontroller |
| Processor Core | Z8 core |
| عرض ناقل البيانات | 8 bit |
| Maximum Clock Speed | 12 MHz |
| Program Memory | 8 KB OTP |
| Program Memory Organization | 8K x 8 bits |
| RAM | 236 x 8 bytes |
| Supply Voltage Range | 4.5 V to 5.5 V |
| I/O Port Count | 32 |
| Serial Interface | UART/USART |
| العلبة | 44-pin PLCC |
| نمط التركيب | J-lead surface mount |
| Temperature Grade | Commercial |
| Technology | CMOS |
| حالة RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
دليل تكوين أطراف Z86E2112VSC 44-pin plcc
تكوين الأطراف لـ Z86E2112VSC (حزمة 44-pin plcc). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ Z86E2112VSC.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
Z86E2112VSC مناسب لـ 6 التطبيقs: Industrial Control Panel, Serial Data Acquisition, Appliance Controller, Communication Interface Module, Embedded Timer and Sequencer, Peripheral Measurement Controller.
Industrial Control Panel
The Z86E2112VSC fits an industrial control panel requiring 32 digital I/O points and a serial management link. Its 12 MHz Z8 core can execute button handling, state-machine logic, indicator control, debouncing, and periodic diagnostics, while 236 bytes of RAM support variables and short data buffers. The 4.5 V to 5.5 V supply range matches conventional 5 V control electronics. OTP program storage is appropriate when keypad and relay-control firmware is finalized during production and does not require repeated field updates.
موصى به
Serial Data Acquisition
The Z86E2112VSC is appropriate for a compact data-acquisition front end that receives commands and reports measurements over UART/USART. Its 8-bit architecture, 12 MHz clock, and 236-byte RAM are sufficient for framing, checksums, scaling, and sampling state in a cost-sensitive embedded instrument. Thirty-two I/O ports allow digital status inputs and control outputs, while the 44-pin PLCC package simplifies assembly in leaded industrial hardware. Firmware can be loaded into the 8 KB OTP program memory during manufacturing.
موصى به
Appliance Controller
The Z86E2112VSC suits a compact appliance controller that coordinates keys, indicators, relays, and a serial accessory. The 32 available I/O ports reduce the need for external digital expanders, while the Z8 core handles debouncing, operating-state logic, timing, and actuator control at up to 12 MHz. Its 8 KB OTP program memory supports a fixed appliance firmware, and 236 bytes of RAM provides working state for menus, timers, and communication buffers. The 5 V operating range integrates readily with conventional appliance electronics.
موصى به
Communication Interface Module
موصى به
Embedded Timer and Sequencer
The Z86E2112VSC is well suited to a programmable timer or sequencer that controls relays, solenoids, indicators, and timed process steps. The 8-bit Z8 core can coordinate timing, interlocks, event sequencing, and fault flags, while the 32 I/O ports provide enough discrete connections for multiple channels. Its 8 KB OTP memory accommodates a fixed sequence table and control program, and 236 bytes of RAM supports counters, temporary states, and diagnostic flags. Operation from 4.5 V to 5.5 V supports legacy industrial-control architectures.
موصى به
Peripheral Measurement Controller
The Z86E2112VSC can coordinate a small sensor or actuator peripheral with digital measurements and serial reporting. Its 32 I/O ports can connect discrete sensors, switches, and output devices, while the 12 MHz processor performs filtering, threshold decisions, calibration constants, and status encoding. The 236-byte RAM is suitable for short samples and working variables, and the 8 KB OTP store holds production configuration and fixed acquisition logic. Its 4.5 V to 5.5 V supply range makes it appropriate for conventional embedded instrumentation.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ Z86E2112VSC — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | Z86E2112VSG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-pin PLCC | 44-pin PLCC |
| Processor Architecture | 8-bit Z8 core | Zilog Z8-family controller |
أبرز الفروقات
- Combines OTP program storage with a 32-port GPIO budget (مقابلZ86E2112VSG)
- Provides integrated UART/USART for serial control designs (مقابلZ86E2112VSG)
- Uses a 44-pin PLCC package with 32 external I/O lines (مقابلZ86E2112VSG)
ملاحظات التصميم
Use the manufacturer connection diagram to assign the 44-pin PLCC footprint and preserve the power, ground, clock, programming, reset, UART, and 32 I/O assignments exactly. Place the supply bypass capacitor adjacent to the device's supply and ground connections, and keep the route between the capacitor and package pins short. The J-lead package requires a footprint with adequate inner- and outer-row clearance and solder-joint geometry appropriate for PLCC assembly.
Do not design an update-oriented firmware path around this controller's 8 KB OTP memory. Program the final code during a controlled manufacturing step, lock out programming access after finalization, and verify every image before programming. Firmware updates, field-reconfigurable products, and applications requiring writable nonvolatile storage should instead use a flash-memory MCU. OTP can reduce component cost while making an accidental or incorrect programming sequence irreversible.
Keep the 12 MHz clock route short and away from UART outputs, switching-regulator nodes, and relay-driver wiring. Provide continuous ground references, decouple supply entry points, and use the unused I/O pins according to the manufacturer guidance rather than leaving high-impedance nets unresolved. If the controller communicates over long cables, use a suitable differential or RS-232 interface rather than relying on the on-chip UART for an unprotected long-distance connection.
معلومات الامتثال
The product information identifies CMOS technology and commercial temperature grade but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.