Z86E2112VSC - 8-Bit 12MHz OTP Microcontroller | Zilog
料号: Z86E2112VSC ✓ 量产中Z86E2112VSC 概述
An 8-bit microcontroller is a programmable semiconductor that executes instructions from a processor architecture designed around an 8-bit data bus. The Z8 family combines a compact controller core, embedded memory, serial interfaces, and general-purpose I/O in one integrated circuit. Z86E2112VSC belongs to the broader hierarchy of 8-bit MCU, embedded microcontroller, programmable controller, and semiconductor, making it suitable for small control systems that do not require a high-performance 32-bit processor.
The principal features include a 12 MHz maximum clock speed, 8 KB of OTP program memory, 236 x 8 bytes of RAM, and 32 I/O ports. OTP memory allows firmware to be programmed once after manufacturing, which is useful for production products whose control program is fixed and does not require field updates. The UART/USART interface enables serial communication with sensors, human-interface controllers, data-collection equipment, or another embedded controller.
The Z8 architecture integrates the processor core, program storage, data RAM, I/O, timers, and serial-interface functions on a single CMOS device. Operating from a 4.5 V to 5.5 V supply provides a conventional 5 V embedded-control environment. Because the program memory is OTP rather than mask-programmable ROM alone, the same commercial device can be programmed for different production configurations after assembly, subject to the one-time programming constraint.
Typical applications include industrial control panels, serial instrumentation, appliance controllers, communication interfaces, embedded timers, and compact peripheral controllers. Its 44-pin PLCC package provides 32 I/O pins for external signals, while the 12 MHz clock rate supports responsive polling, debouncing, state-machine execution, and UART protocol handling. The relatively broad I/O count is particularly useful when a design needs multiple digital inputs and outputs around one controller.
Designers should treat OTP programming as a one-time production operation and protect the programming interface from unintended access after programming. Place the device's decoupling capacitor close to its supply pins, route clock and serial signals away from noisy switching nodes, and confirm the complete 44-pin PLCC footprint and pin assignments against the manufacturer datasheet before layout release. The PLCC package also requires attention to solder-joint geometry and thermal performance during assembly.
直接替换替代料: Z86E2112VSC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
Z86E2112VSG
✅ 直接替换📋 参考替代料(不在目录中)
Z86E2112VSC 最大额定值与电气特性
| Product Type | 8-bit CMOS microcontroller |
| Processor Core | Z8 core |
| 数据总线宽度 | 8 bit |
| Maximum Clock Speed | 12 MHz |
| Program Memory | 8 KB OTP |
| Program Memory Organization | 8K x 8 bits |
| RAM | 236 x 8 bytes |
| Supply Voltage Range | 4.5 V to 5.5 V |
| I/O Port Count | 32 |
| Serial Interface | UART/USART |
| 封装 | 44-pin PLCC |
| 安装方式 | J-lead surface mount |
| Temperature Grade | Commercial |
| Technology | CMOS |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Z86E2112VSC 44-pin plcc 引脚配置指南
Z86E2112VSC(44-pin plcc 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: Z86E2112VSC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z86E2112VSC 适用于 6 应用s: Industrial Control Panel, Serial Data Acquisition, Appliance Controller, Communication Interface Module, Embedded Timer and Sequencer, Peripheral Measurement Controller.
Industrial Control Panel
The Z86E2112VSC fits an industrial control panel requiring 32 digital I/O points and a serial management link. Its 12 MHz Z8 core can execute button handling, state-machine logic, indicator control, debouncing, and periodic diagnostics, while 236 bytes of RAM support variables and short data buffers. The 4.5 V to 5.5 V supply range matches conventional 5 V control electronics. OTP program storage is appropriate when keypad and relay-control firmware is finalized during production and does not require repeated field updates.
推荐
Serial Data Acquisition
The Z86E2112VSC is appropriate for a compact data-acquisition front end that receives commands and reports measurements over UART/USART. Its 8-bit architecture, 12 MHz clock, and 236-byte RAM are sufficient for framing, checksums, scaling, and sampling state in a cost-sensitive embedded instrument. Thirty-two I/O ports allow digital status inputs and control outputs, while the 44-pin PLCC package simplifies assembly in leaded industrial hardware. Firmware can be loaded into the 8 KB OTP program memory during manufacturing.
推荐
Appliance Controller
The Z86E2112VSC suits a compact appliance controller that coordinates keys, indicators, relays, and a serial accessory. The 32 available I/O ports reduce the need for external digital expanders, while the Z8 core handles debouncing, operating-state logic, timing, and actuator control at up to 12 MHz. Its 8 KB OTP program memory supports a fixed appliance firmware, and 236 bytes of RAM provides working state for menus, timers, and communication buffers. The 5 V operating range integrates readily with conventional appliance electronics.
推荐
Communication Interface Module
推荐
Embedded Timer and Sequencer
The Z86E2112VSC is well suited to a programmable timer or sequencer that controls relays, solenoids, indicators, and timed process steps. The 8-bit Z8 core can coordinate timing, interlocks, event sequencing, and fault flags, while the 32 I/O ports provide enough discrete connections for multiple channels. Its 8 KB OTP memory accommodates a fixed sequence table and control program, and 236 bytes of RAM supports counters, temporary states, and diagnostic flags. Operation from 4.5 V to 5.5 V supports legacy industrial-control architectures.
推荐
Peripheral Measurement Controller
The Z86E2112VSC can coordinate a small sensor or actuator peripheral with digital measurements and serial reporting. Its 32 I/O ports can connect discrete sensors, switches, and output devices, while the 12 MHz processor performs filtering, threshold decisions, calibration constants, and status encoding. The 236-byte RAM is suitable for short samples and working variables, and the 8 KB OTP store holds production configuration and fixed acquisition logic. Its 4.5 V to 5.5 V supply range makes it appropriate for conventional embedded instrumentation.
推荐
推荐产品汇总
工程参考数据: Z86E2112VSC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | Z86E2112VSG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-pin PLCC | 44-pin PLCC |
| Processor Architecture | 8-bit Z8 core | Zilog Z8-family controller |
关键差异点
- Combines OTP program storage with a 32-port GPIO budget (对比 Z86E2112VSG)
- Provides integrated UART/USART for serial control designs (对比 Z86E2112VSG)
- Uses a 44-pin PLCC package with 32 external I/O lines (对比 Z86E2112VSG)
设计说明
Use the manufacturer connection diagram to assign the 44-pin PLCC footprint and preserve the power, ground, clock, programming, reset, UART, and 32 I/O assignments exactly. Place the supply bypass capacitor adjacent to the device's supply and ground connections, and keep the route between the capacitor and package pins short. The J-lead package requires a footprint with adequate inner- and outer-row clearance and solder-joint geometry appropriate for PLCC assembly.
Do not design an update-oriented firmware path around this controller's 8 KB OTP memory. Program the final code during a controlled manufacturing step, lock out programming access after finalization, and verify every image before programming. Firmware updates, field-reconfigurable products, and applications requiring writable nonvolatile storage should instead use a flash-memory MCU. OTP can reduce component cost while making an accidental or incorrect programming sequence irreversible.
Keep the 12 MHz clock route short and away from UART outputs, switching-regulator nodes, and relay-driver wiring. Provide continuous ground references, decouple supply entry points, and use the unused I/O pins according to the manufacturer guidance rather than leaving high-impedance nets unresolved. If the controller communicates over long cables, use a suitable differential or RS-232 interface rather than relying on the on-chip UART for an unprotected long-distance connection.
合规信息
The product information identifies CMOS technology and commercial temperature grade but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.