AD977BRZ vs AD977BRSZ তুলনা
. বিস্তৃত সাথে-সাথে তুলনা AD977BRZ নির্দিষ্ট Analog Devices ও AD977BRSZ নির্দিষ্ট Analog Devices. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
বিশিষ্টতা তুলনা
| পারামিটার | AD977BRZ | AD977BRSZ |
|---|---|---|
| ব্র্যান্ড | Analog Devices | Analog Devices |
| ক্যাটাগরি | ADC/DAC | ADC/DAC |
| লাইফসাইকেল স্ট্যাটাস | Unknown | Obsolete |
| Converter Type | Successive-approximation ADC (SAR) | — |
| রেজোলিউশন | 16 bit | 16 bit |
| স্যাম্পলিং রেট | 100 kSPS | — |
| Number of Inputs | 1 input | — |
| সাপ্লাই ভোল্টেজ | 5 V | — |
| Internal Reference Voltage | 2.5 V | 2.5 V |
| ইন্টারফেস টাইপ | High-speed serial interface | — |
| প্যাকেজ | 20-SOIC | 28-pin SSOP, 5.30 mm width |
| মাউন্টিং টাইপ | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Factory Calibration | Factory calibrated to minimize linearity error | Minimizes all linearity errors |
| Input Type | [DATA_NEEDED: ADC input configuration] | Single input |
| Analog Input Range | [DATA_NEEDED: analog input voltage range] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Offset Error | [DATA_NEEDED: offset error] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| Effective Number of Bits | [DATA_NEEDED: effective number of bits] | — |
| অপারেটিং তাপমাত্রার পরিসর | [DATA_NEEDED: minimum and maximum operating temperature] | — |
| Power Consumption | [DATA_NEEDED: typical and maximum power consumption] | — |
| RoHS স্ট্যাটাস | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Yes | — |
| Architecture | — | Successive approximation (SAR) |
| Throughput Rate | — | 100 kSPS |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Data Interface | — | Serial, SPI |
| Power Dissipation | — | 100 mW maximum |
| Power-Down Mode | — | 50 W maximum input power |
| অপারেটিং তাপমাত্রা | — | -40°C to +85°C |
| Package Pitch | — | 0.65 mm |
| REACH Status | — | [DATA_NEEDED: REACH status] |