AD977BRZ vs AD977BRSZ तुलना
विस्तृत दोनों ओर की तुलना AD977BRZ द्वारा Analog Devices और AD977BRSZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD977BRZ | AD977BRSZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | Unknown | Obsolete |
| Converter Type | Successive-approximation ADC (SAR) | — |
| रेज़ोल्यूशन | 16 bit | 16 bit |
| सैंपलिंग रेट | 100 kSPS | — |
| Number of Inputs | 1 input | — |
| सप्लाई वोल्टेज | 5 V | — |
| Internal Reference Voltage | 2.5 V | 2.5 V |
| इंटरफ़ेस प्रकार | High-speed serial interface | — |
| पैकेज | 20-SOIC | 28-pin SSOP, 5.30 mm width |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Factory Calibration | Factory calibrated to minimize linearity error | Minimizes all linearity errors |
| Input Type | [DATA_NEEDED: ADC input configuration] | Single input |
| Analog Input Range | [DATA_NEEDED: analog input voltage range] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Offset Error | [DATA_NEEDED: offset error] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| Effective Number of Bits | [DATA_NEEDED: effective number of bits] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: minimum and maximum operating temperature] | — |
| Power Consumption | [DATA_NEEDED: typical and maximum power consumption] | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Yes | — |
| Architecture | — | Successive approximation (SAR) |
| Throughput Rate | — | 100 kSPS |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Data Interface | — | Serial, SPI |
| Power Dissipation | — | 100 mW maximum |
| Power-Down Mode | — | 50 W maximum input power |
| ऑपरेटिंग तापमान | — | -40°C to +85°C |
| Package Pitch | — | 0.65 mm |
| REACH Status | — | [DATA_NEEDED: REACH status] |