LM2904N vs LM2904NG তুলনা
. বিস্তৃত সাথে-সাথে তুলনা LM2904N নির্দিষ্ট Texas Instruments ও LM2904NG নির্দিষ্ট onsemi. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
বিশিষ্টতা তুলনা
| পারামিটার | LM2904N | LM2904NG |
|---|---|---|
| ব্র্যান্ড | Texas Instruments | onsemi |
| ক্যাটাগরি | Amplifier ICs | Amplifier ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Amplifier Count | 2 amplifiers | — |
| Product Family Supply Designation | 26 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| টপোলজি | Dual independent operational amplifiers | — |
| Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply or split supply | — |
| Common-Mode Input Range | Extending to ground/VEE | — |
| Power Drain | Low; numeric value [DATA_NEEDED: power drain] | — |
| আউটপুট টাইপ | Push-pull | — |
| প্যাকেজ | 8-pin PDIP | — |
| মাউন্টিং টাইপ | Through-hole | Through Hole |
| Input Type | Differential | — |
| Product Classification | Standard general-purpose amplifier | — |
| অপারেটিং তাপমাত্রার পরিসর | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 26 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/µs |
| Output Current | [DATA_NEEDED: output current] | — |
| RoHS স্ট্যাটাস | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 2 |
| Gain Bandwidth Product | — | 1 MHz |
| অপারেটিং তাপমাত্রা | — | -40C to +105C |
| প্যাকেজ / কেস | — | PDIP-8 (0.300 in, 7.62 mm) |
| Packaging | — | Tube |
| Input Common-Mode Range | — | Extends to ground/VEE |
| Supply Type | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| সাপ্লাই কারেন্ট | — | [DATA_NEEDED: supply current per amplifier] |
| Output Current per Channel | — | [DATA_NEEDED: output current] |