LM2904N vs LM2904NG Vergleich
Detaillierter Direktvergleich von LM2904N von Texas Instruments und LM2904NG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2904N | LM2904NG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Count | 2 amplifiers | — |
| Product Family Supply Designation | 26 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Topologie | Dual independent operational amplifiers | — |
| Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply or split supply | — |
| Common-Mode Input Range | Extending to ground/VEE | — |
| Power Drain | Low; numeric value [DATA_NEEDED: power drain] | — |
| Ausgangstyp | Push-pull | — |
| Gehäuse | 8-pin PDIP | — |
| Montageart | Through-hole | Through Hole |
| Input Type | Differential | — |
| Product Classification | Standard general-purpose amplifier | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 26 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/µs |
| Output Current | [DATA_NEEDED: output current] | — |
| RoHS-Status | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 2 |
| Gain Bandwidth Product | — | 1 MHz |
| Betriebstemperatur | — | -40C to +105C |
| Gehäuse / Bauform | — | PDIP-8 (0.300 in, 7.62 mm) |
| Packaging | — | Tube |
| Input Common-Mode Range | — | Extends to ground/VEE |
| Supply Type | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Versorgungsstrom | — | [DATA_NEEDED: supply current per amplifier] |
| Output Current per Channel | — | [DATA_NEEDED: output current] |