MAX1480BCPI+ vs MAX1480BEPI+ তুলনা
. বিস্তৃত সাথে-সাথে তুলনা MAX1480BCPI+ নির্দিষ্ট Analog Devices ও MAX1480BEPI+ নির্দিষ্ট Maxim Integrated. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ সক্রিয়বিশিষ্টতা তুলনা
| পারামিটার | MAX1480BCPI+ | MAX1480BEPI+ |
|---|---|---|
| ব্র্যান্ড | Analog Devices | Maxim Integrated |
| ক্যাটাগরি | Interface ICs | Interface ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| ডেটা রেট | 250 kbps | 250 kb/s |
| Receiver Hysteresis | 70 mV | 70 mV |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| প্যাকেজ | 28-PDIP (0.600", 15.24 mm wide) | 28-pin PDIP |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation voltage rating] |
| মাউন্টিং টাইপ | Through-Hole | Through-hole |
| অপারেটিং তাপমাত্রা | -40C to +85C | 0 °C to +70 °C |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| RoHS স্ট্যাটাস | Compliant | — |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Complete electrically isolated RS-485/RS-422 data interface |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | RS-422 and RS-485 |
| Isolation | — | Electrically isolated |
| Driver Slew Rate | — | Reduced-slew-rate driver |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| প্যাকেজ / কেস | — | 28-DIP (0.600 inch, 15.24 mm) |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |