MAX1480BCPI+ vs MAX1480BEPI+ 比較
詳細並排比較 MAX1480BCPI+ 由 Analog Devices 與 MAX1480BEPI+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ 啟用中規格比較
| 參數 | MAX1480BCPI+ | MAX1480BEPI+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 資料速率 | 250 kbps | 250 kb/s |
| Receiver Hysteresis | 70 mV | 70 mV |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| 封裝 | 28-PDIP (0.600", 15.24 mm wide) | 28-pin PDIP |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation voltage rating] |
| 安裝類型 | Through-Hole | Through-hole |
| 工作溫度 | -40C to +85C | 0 °C to +70 °C |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| RoHS 狀態 | Compliant | — |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Complete electrically isolated RS-485/RS-422 data interface |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | RS-422 and RS-485 |
| Isolation | — | Electrically isolated |
| Driver Slew Rate | — | Reduced-slew-rate driver |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| 封裝 / 外殼 | — | 28-DIP (0.600 inch, 15.24 mm) |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |