AD504LH - 500 uV Offset Precision Op Amp | Analog Devices
MPN: AD504LH ✗ জীবনকালের সমাপ্তিAD504LH সারাংশ
An operational amplifier is a voltage-feedback analog integrated circuit used to amplify differences between two input signals while rejecting common-mode noise and maintaining high input impedance. The AD504 belongs to the precision operational amplifier category, within the broader amplifier IC and analog signal-conditioning hierarchy. Its precision characteristics make it useful when the difference between two small voltages must be measured or amplified accurately.
The 500 uV input offset specification is the headline accuracy parameter for the AD504LH. Offset voltage represents the output error produced when the two input voltages are equal, so a lower value reduces the need for calibration in precision measurement paths. The stated 120 dB CMRR indicates strong rejection of signals common to both inputs, which is valuable when a sensor output is small relative to the voltage applied to the sensor or instrumentation chain. The 300 kHz unity-gain bandwidth supports signal amplification where the required closed-loop bandwidth remains below the amplifier's gain-bandwidth limit.
The AD504LH is specified for a 15 V supply in the product listing data. The TO-99 package is a hermetically sealed metal-can format commonly associated with older precision and military-qualified analog devices. Its 8 wire terminals and round package differ materially from modern surface-mount op amps, so a replacement must match the mechanical footprint, terminal arrangement, supply requirements, and electrical performance. The manufacturer lists the AD504 product as obsolete, making lifecycle status an important qualification consideration for new designs.
Typical uses include laboratory instrumentation, low-level sensor amplification, precision bridge or strain-gauge signal conditioning, and analog measurement systems where offset and common-mode performance are more important than wide bandwidth or a modern surface-mount footprint. The AD504LH can be considered where a through-hole metal-can amplifier is mechanically required and where an obsolete lifecycle status is acceptable.
Designers should confirm the pinout, supply-voltage limits, offset and bias-current behavior, noise specifications, and temperature range against the Analog Devices AD504 datasheet before layout or replacement work. Because the TO-99 package is not represented in the package-diagram library used by this page, the pin drawing should be taken directly from the manufacturer datasheet rather than inferred from the round package outline.
এর জন্য ড্রপ-ইন বিকল্প AD504LH — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
LM709AH
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LM709H-MIL
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AD504LH সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Operational Amplifier |
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Input Offset Voltage | 500 uV |
| Common Mode Rejection Ratio | 120 dB |
| সাপ্লাই ভোল্টেজ | 15 V |
| Unity-Gain Bandwidth | 300 kHz |
| Temperature Grade | Commercial |
| Terminal Form | Wire |
| Number of Terminals | 8 |
| Package Shape | Round |
| প্যাকেজ | TO-99 |
| মাউন্টিং টাইপ | Through-hole |
| লাইফসাইকেল স্ট্যাটাস | Obsolete |
AD504LH to-99 পিন কনফিগারেশন গাইড
AD504LH (to-99 প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD504LH.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AD504LH এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Sensor Signal Conditioning, Laboratory Instrumentation, Strain-Gauge Bridge Amplification, Industrial Process Measurement, Precision Current-to-Voltage Conversion, Legacy Analog Control Circuits.
Precision Sensor Signal Conditioning
The AD504LH is appropriate for low-level differential sensor amplification because its 500 uV input offset voltage and 120 dB common-mode rejection ratio limit unwanted error in the measurement path. Place it where the sensor output is much smaller than its common-mode voltage and where a 300 kHz unity-gain bandwidth is sufficient. The single TO-99 amplifier requires careful lead routing, stable bypassing, and verification that the actual bias current and noise meet the sensor's error budget.
সুপারিশকৃত
Laboratory Instrumentation
AD504LH fits laboratory measurement amplifiers that compare small reference and sensed voltages. The 120 dB CMRR helps suppress shared noise on the two input nodes, while the 500 uV offset specification keeps a meaningful accuracy parameter in the instrument error budget. For bridge, strain-gauge, or laboratory reference designs, verify input bias current, noise density, supply-current demand, and maximum input voltage against the AD504 data sheet before final calibration.
সুপারিশকৃত
Strain-Gauge Bridge Amplification
The AD504LH can serve as the first amplifier stage for a resistive strain-gauge bridge when the bridge excitation creates a substantial common-mode voltage. Its stated 120 dB CMRR improves rejection of excitation-related common-mode error, and the 500 uV offset specification defines a meaningful part of the input-stage error. Check bridge excitation levels, input bias current, and the datasheet common-mode range so that the amplifier remains within its operating limits.
সুপারিশকৃত
Industrial Process Measurement
AD504LH is relevant to industrial process-monitoring circuits that amplify low-level differential signals from pressure, temperature, or resistance sensors. The high listed CMRR of 120 dB helps reject shared industrial noise, while the 300 kHz unity-gain bandwidth is adequate for many slowly changing control signals. Because the amplifier is obsolete and supplied in a through-hole TO-99 package, new machinery designs should also consider lifecycle risk and modern alternative architectures.
সুপারিশকৃত
Precision Current-to-Voltage Conversion
The AD504LH can amplify a small voltage developed across a sense resistor when accurate low-level differential measurement is required. The 500 uV offset specification establishes the input-referred error floor, and the 120 dB CMRR reduces errors from supply or ground disturbances appearing at both sense terminals. Confirm that input bias current is negligible against the sensor impedance, and select resistor and feedback values that keep closed-loop bandwidth and output swing within acceptable limits.
সুপারিশকৃত
Legacy Analog Control Circuits
AD504LH is suited to maintenance and replication of legacy analog control boards that already use an 8-terminal TO-99 precision amplifier. Its single-circuit architecture, 15 V listed supply condition, and 300 kHz unity-gain bandwidth match the class of instrumentation circuits for which the device was used. The key practical constraint is not performance alone but mechanical and lifecycle compatibility: any substitution must preserve the pin arrangement and should be validated against the original AD504 data sheet.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD504LH — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LM709AH | LM709H-MIL |
|---|---|---|---|
| Brand | Analog Devices | Texas Instruments | Texas Instruments |
| Package | TO-99, 8 wire terminals | TO-99, package details require confirmation | TO-99, package details require confirmation |
| Number of Circuits | 1 | 1 | 1 |
| Mounting Style | Through-hole, wire terminals | Through-hole package confirmation required | Through-hole package confirmation required |
মূল পার্থক্যসমূহ
- Directly documented precision characteristics for the exact obsolete MPN (বনামLM709AH)
- Commercial temperature grade for the listed AD504LH configuration (বনামLM709H-MIL)
- Known 8-terminal round TO-99 package identity (বনামLM709AH)
ডিজাইন নোট
Do not treat a cross-reference result as proof of drop-in compatibility. Verify the eight-terminal TO-99 pin arrangement, offset voltage, CMRR, unity-gain bandwidth, supply range, and temperature grade for the selected LM709AH or LM709H-MIL before substituting it into an AD504LH circuit. The retrieved comparison pages establish that the parts are compared, but they do not document a complete electrical and mechanical match.
Route the differential input pair as a short, closely coupled path and place power-decoupling capacitors close to the relevant device leads. High-CMRR performance only rejects common-mode noise if unwanted signals have not already been converted into differential error by unequal trace lengths or unequal impedances. Because the TO-99 terminal functions are not printed in the catalog record, assign every connection from the Analog Devices package drawing.
Design the supply around the 15 V operating condition listed for this exact MPN and confirm minimum and maximum supply limits in the manufacturer data sheet. Check quiescent current and output-current capability before using the AD504LH in a multistage precision circuit. If replacing it with LM709AH or LM709H-MIL, compare supply-current draw and output-drive specifications as well as accuracy and bandwidth.
কমপ্লায়েন্স তথ্য
The Analog Devices product page identifies the AD504 as obsolete. Compliance status is not stated in the retrieved product information and is therefore recorded as unknown.