Analog Devices

AD504LH - 500 uV Offset Precision Op Amp | Analog Devices

MPN: AD504LH ✗ Tapus ng Buhay
500 uV Vdss Round Package
MOQ: 1 |

AD504LH Ulas

The Analog Devices AD504LH is a single-circuit precision operational amplifier with a low input offset voltage of 500 uV, common-mode rejection ratio of 120 dB, and unity-gain bandwidth of 300 kHz. It is supplied in a round TO-99 metal-can package with 8 wire terminals and is identified as a commercial-grade, general-purpose instrumentation amplifier.

An operational amplifier is a voltage-feedback analog integrated circuit used to amplify differences between two input signals while rejecting common-mode noise and maintaining high input impedance. The AD504 belongs to the precision operational amplifier category, within the broader amplifier IC and analog signal-conditioning hierarchy. Its precision characteristics make it useful when the difference between two small voltages must be measured or amplified accurately.

The 500 uV input offset specification is the headline accuracy parameter for the AD504LH. Offset voltage represents the output error produced when the two input voltages are equal, so a lower value reduces the need for calibration in precision measurement paths. The stated 120 dB CMRR indicates strong rejection of signals common to both inputs, which is valuable when a sensor output is small relative to the voltage applied to the sensor or instrumentation chain. The 300 kHz unity-gain bandwidth supports signal amplification where the required closed-loop bandwidth remains below the amplifier's gain-bandwidth limit.

The AD504LH is specified for a 15 V supply in the product listing data. The TO-99 package is a hermetically sealed metal-can format commonly associated with older precision and military-qualified analog devices. Its 8 wire terminals and round package differ materially from modern surface-mount op amps, so a replacement must match the mechanical footprint, terminal arrangement, supply requirements, and electrical performance. The manufacturer lists the AD504 product as obsolete, making lifecycle status an important qualification consideration for new designs.

Typical uses include laboratory instrumentation, low-level sensor amplification, precision bridge or strain-gauge signal conditioning, and analog measurement systems where offset and common-mode performance are more important than wide bandwidth or a modern surface-mount footprint. The AD504LH can be considered where a through-hole metal-can amplifier is mechanically required and where an obsolete lifecycle status is acceptable.

Designers should confirm the pinout, supply-voltage limits, offset and bias-current behavior, noise specifications, and temperature range against the Analog Devices AD504 datasheet before layout or replacement work. Because the TO-99 package is not represented in the package-diagram library used by this page, the pin drawing should be taken directly from the manufacturer datasheet rather than inferred from the round package outline.

Mga alternatibo na pwedeng ilagay na AD504LH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LM709AH

✅ Drop-In
📦 TO-99
Cross-reference candidate for AD504LH; exact offset, CMRR, bandwidth, and pin arrangement are

📋 Alternatibo na Reference (hindi sa katalogo)

LM709H-MIL

✅ Drop-In
📦 TO-99
MIL-grade cross-reference candidate for AD504LH; temperature grade and electrical differences are

📋 Alternatibo na Reference (hindi sa katalogo)

AD504LH Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Operational Amplifier
Amplifier Type General Purpose
Number of Circuits 1
Input Offset Voltage 500 uV
Common Mode Rejection Ratio 120 dB
Volte ng Pagbibigay 15 V
Unity-Gain Bandwidth 300 kHz
Temperature Grade Commercial
Terminal Form Wire
Number of Terminals 8
Package Shape Round
Packhaging TO-99
Uri ng Pagpapasok Through-hole
Katayuan ng Lifecycle Obsolete

Gabay sa Pin Configuration ng AD504LH to-99

Pin configuration para sa AD504LH (to-99 package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng to-99 package para sa AD504LH

Wala ng detalyadong pinout data na magagamit para sa AD504LH.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD504LH ay nararapat para sa 6 aplikasyons: Precision Sensor Signal Conditioning, Laboratory Instrumentation, Strain-Gauge Bridge Amplification, Industrial Process Measurement, Precision Current-to-Voltage Conversion, Legacy Analog Control Circuits.

🧩

Precision Sensor Signal Conditioning

The AD504LH is appropriate for low-level differential sensor amplification because its 500 uV input offset voltage and 120 dB common-mode rejection ratio limit unwanted error in the measurement path. Place it where the sensor output is much smaller than its common-mode voltage and where a 300 kHz unity-gain bandwidth is sufficient. The single TO-99 amplifier requires careful lead routing, stable bypassing, and verification that the actual bias current and noise meet the sensor's error budget.

🔧

Laboratory Instrumentation

AD504LH fits laboratory measurement amplifiers that compare small reference and sensed voltages. The 120 dB CMRR helps suppress shared noise on the two input nodes, while the 500 uV offset specification keeps a meaningful accuracy parameter in the instrument error budget. For bridge, strain-gauge, or laboratory reference designs, verify input bias current, noise density, supply-current demand, and maximum input voltage against the AD504 data sheet before final calibration.

🏭

Strain-Gauge Bridge Amplification

The AD504LH can serve as the first amplifier stage for a resistive strain-gauge bridge when the bridge excitation creates a substantial common-mode voltage. Its stated 120 dB CMRR improves rejection of excitation-related common-mode error, and the 500 uV offset specification defines a meaningful part of the input-stage error. Check bridge excitation levels, input bias current, and the datasheet common-mode range so that the amplifier remains within its operating limits.

🏭

Industrial Process Measurement

AD504LH is relevant to industrial process-monitoring circuits that amplify low-level differential signals from pressure, temperature, or resistance sensors. The high listed CMRR of 120 dB helps reject shared industrial noise, while the 300 kHz unity-gain bandwidth is adequate for many slowly changing control signals. Because the amplifier is obsolete and supplied in a through-hole TO-99 package, new machinery designs should also consider lifecycle risk and modern alternative architectures.

⚡

Precision Current-to-Voltage Conversion

The AD504LH can amplify a small voltage developed across a sense resistor when accurate low-level differential measurement is required. The 500 uV offset specification establishes the input-referred error floor, and the 120 dB CMRR reduces errors from supply or ground disturbances appearing at both sense terminals. Confirm that input bias current is negligible against the sensor impedance, and select resistor and feedback values that keep closed-loop bandwidth and output swing within acceptable limits.

🖥️

Legacy Analog Control Circuits

AD504LH is suited to maintenance and replication of legacy analog control boards that already use an 8-terminal TO-99 precision amplifier. Its single-circuit architecture, 15 V listed supply condition, and 300 kHz unity-gain bandwidth match the class of instrumentation circuits for which the device was used. The key practical constraint is not performance alone but mechanical and lifecycle compatibility: any substitution must preserve the pin arrangement and should be validated against the original AD504 data sheet.

What is the AD504LH?
The AD504LH is a single-circuit, precision general-purpose operational amplifier from Analog Devices in an 8-lead TO-99 metal-can package. According to the Analog Devices AD504 product page, the AD504 family is obsolete. Key listed characteristics include 500 uV input offset voltage, 120 dB common-mode rejection ratio, and 300 kHz unity-gain bandwidth.
What is the input offset voltage of the AD504LH?
The AD504LH has a listed input offset voltage of 500 uV, or 0.5 mV. This specification is important in precision measurement circuits because input offset voltage contributes directly to output error when the differential input is small. Partstack lists the 500 uV offset for AD504LH; confirm the full test conditions in the Analog Devices AD504 datasheet.
What is the common-mode rejection ratio of AD504LH?
The AD504LH has a nominal common-mode rejection ratio of 120 dB, as listed by Partstack for this exact MPN. High CMRR helps reject interference or signal that appears simultaneously at both amplifier inputs. The manufacturer datasheet should be consulted for the specified frequency range and common-mode voltage conditions.
What is the unity-gain bandwidth of the AD504LH?
The AD504LH provides a unity-gain bandwidth of 300 kHz. This defines the approximate bandwidth available when the amplifier is configured for a gain of one, subject to the application-specific closed-loop response and datasheet test conditions. Partstack lists the 300 kHz figure for AD504LH.
What package does the AD504LH use?
The AD504LH is packaged in a round TO-99 metal-can package with 8 wire terminals. DigiKey describes the exact MPN as a one-circuit TO-99 amplifier, while Vyrian identifies the round package shape and 8 terminals. Because TO-99 is not in this page's package-diagram library, use the manufacturer pin drawing for wiring.
Is the AD504LH still active?
The AD504LH is obsolete. Analog Devices explicitly identifies the AD504 product as obsolete on its official product page and links an obsolete data sheet dated 10/20/2008. New production should not be assumed; existing users should request current availability and lot-specific documentation through the Request a Quote form on this page.
Where can I download the AD504LH datasheet?
The official Analog Devices AD504 product page is the appropriate starting point for the AD504 datasheet and obsolete-product documentation. The product page is available at https://www.analog.com/en/products/ad504.html. Use the AD504 family data sheet for pinout, electrical characteristics, and package drawings.
Where can I find the AD504LH pinout?
Use the pin-description table and package drawing in the Analog Devices AD504 data sheet to identify the eight terminals of the AD504LH. The catalog data confirms an 8-terminal round TO-99 package, but terminal functions are not printed in the product listing, so assigning PCB tracks or wiring from the package outline alone is not recommended.
Can LM709AH replace the AD504LH?
LM709AH appears in cross-reference comparisons with the AD504LH, but the retrieved comparison does not establish a confirmed drop-in match. The AD504LH is a TO-99, 8-terminal device, so any substitution must be checked for identical pin arrangement, offset voltage, CMRR, bandwidth, supply range, and temperature grade. Treat LM709AH as a cross-reference candidate rather than an automatic replacement.
Can LM709H-MIL replace the AD504LH?
LM709H-MIL is listed in a comparison against the AD504LH, but the retrieved material does not prove pin-to-pin or parametric equivalence. Because LM709H-MIL is identified as a MIL comparison candidate and the AD504LH is a commercial-grade TO-99 amplifier, qualification, temperature range, and lead arrangement must be verified in the individual data sheets before substitution.
What is the best drop-in replacement for AD504LH?
The best replacement is the part that matches the AD504LH's TO-99 mechanical outline, 8-terminal pin arrangement, supply range, input offset voltage, CMRR, bandwidth, and temperature requirements. The available cross-reference listings identify LM709AH and LM709H-MIL as comparison candidates, but they do not establish drop-in qualification. Request a formal cross-reference assessment through the Request a Quote form on this page.
AD504LH vs LM709AH: which is better for precision instrumentation?
The AD504LH is the better documented choice for an existing design because its exact catalog specifications include 500 uV offset voltage, 120 dB CMRR, and 300 kHz unity-gain bandwidth. The comparison material does not provide equivalent verified data for LM709AH, so it cannot be declared superior. Evaluate LM709AH only after checking its offset, CMRR, bandwidth, package, and pinout against the AD504 requirements.
When should I choose the AD504LH over a modern operational amplifier?
Choose the AD504LH when an existing through-hole TO-99 footprint, the established AD504 electrical behavior, or a specific legacy instrumentation requirement makes a modern amplifier unsuitable. Its 500 uV offset, 120 dB CMRR, and 300 kHz unity-gain bandwidth remain meaningful for precision analog design, while the obsolete lifecycle status and hermetic metal-can package limit new-design flexibility.
Is the AD504LH suitable for sensor signal conditioning?
The AD504LH is suitable for low-level sensor signal conditioning when 500 uV offset and 120 dB CMRR satisfy the measurement budget. It can amplify differential sensor outputs where the common-mode component is large relative to the signal. Confirm the actual common-mode range, bias current, noise, and supply limits in the AD504 datasheet before committing the design.
What are the key specifications of AD504LH that engineers should know?
The core AD504LH specifications are a 500 uV input offset voltage, 120 dB common-mode rejection ratio, 300 kHz unity-gain bandwidth, 15 V listed supply voltage, single-circuit topology, and an 8-wire round TO-99 package. The manufacturer classifies the AD504 family as obsolete. These values should be checked against datasheet test conditions and temperature grades during design or replacement review.
How do I order the AD504LH for an obsolete part?
Submit an AD504LH request through the Request a Quote form on this page, stating the required quantity, date code, traceability requirements, and acceptable package or marking condition. Because the product is obsolete, availability may depend on remaining inventory and lot continuity. A formal quote request is the appropriate route for confirming supply status and documentation.
What can replace the AD504LH in a legacy circuit?
LM709AH and LM709H-MIL are the named cross-reference candidates for the AD504LH, but a valid replacement must be confirmed against the complete electrical and mechanical specification. Neither retrieved comparison proves a drop-in match. If an existing board must be reused, verify the TO-99 pin arrangement first; if the board can be redesigned, compare modern rail-to-rail amplifiers on noise, offset, supply, bandwidth, and cost.

Impormasyon ng Talumpati sa Engineering for AD504LH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD504LH when maintaining or reproducing a legacy circuit whose original design already depends on its TO-99 package, terminal arrangement, and established precision behavior. Its 500 uV input offset voltage, 120 dB CMRR, and 300 kHz unity-gain bandwidth remain suitable for low-level differential measurement, laboratory instrumentation, and sensor conditioning. Consider LM709AH when a cross-reference candidate is needed for a commercial-grade design, but require a full data-sheet comparison of offset, CMRR, bandwidth, supply range, and pinout before calling it drop-in. Evaluate LM709H-MIL for legacy or qualification-sensitive applications only after confirming temperature requirements and exact lead compatibility. For new high-volume products, the obsolete lifecycle status makes a modern surface-mount precision amplifier generally more practical, provided the PCB and system requirements can change.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM709AH LM709H-MIL
Brand Analog Devices Texas Instruments Texas Instruments
Package TO-99, 8 wire terminals TO-99, package details require confirmation TO-99, package details require confirmation
Number of Circuits 1 1 1
Mounting Style Through-hole, wire terminals Through-hole package confirmation required Through-hole package confirmation required

Pangunahing mga Pagkakaiba

  • Directly documented precision characteristics for the exact obsolete MPN (kumpara saLM709AH)
  • Commercial temperature grade for the listed AD504LH configuration (kumpara saLM709H-MIL)
  • Known 8-terminal round TO-99 package identity (kumpara saLM709AH)

Talaan ng Disenyo

Do not treat a cross-reference result as proof of drop-in compatibility. Verify the eight-terminal TO-99 pin arrangement, offset voltage, CMRR, unity-gain bandwidth, supply range, and temperature grade for the selected LM709AH or LM709H-MIL before substituting it into an AD504LH circuit. The retrieved comparison pages establish that the parts are compared, but they do not document a complete electrical and mechanical match.

Route the differential input pair as a short, closely coupled path and place power-decoupling capacitors close to the relevant device leads. High-CMRR performance only rejects common-mode noise if unwanted signals have not already been converted into differential error by unequal trace lengths or unequal impedances. Because the TO-99 terminal functions are not printed in the catalog record, assign every connection from the Analog Devices package drawing.

Design the supply around the 15 V operating condition listed for this exact MPN and confirm minimum and maximum supply limits in the manufacturer data sheet. Check quiescent current and output-current capability before using the AD504LH in a multistage precision circuit. If replacing it with LM709AH or LM709H-MIL, compare supply-current draw and output-drive specifications as well as accuracy and bandwidth.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The Analog Devices product page identifies the AD504 as obsolete. Compliance status is not stated in the retrieved product information and is therefore recorded as unknown.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD504LH datasheet AD504LH pinout AD504LH specifications AD504LH TO-99 amplifier AD504LH equivalent AD504LH replacement AD504LH vs LM709AH AD504LH offset voltage AD504LH CMRR AD504LH unity gain bandwidth Analog Devices AD504LH AD504LH precision op amp AD504LH price AD504LH obsolete

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD504 AD504LH LM709AH LM709H-MIL operational amplifier precision operational amplifier general-purpose amplifier instrumentation amplifier analog integrated circuit voltage-feedback amplifier signal conditioning input offset voltage common-mode rejection ratio CMRR unity-gain bandwidth TO-99 metal-can package 8 wire terminals through-hole mounting strain-gauge bridge laboratory instrumentation industrial process measurement obsolete component commercial temperature grade
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ