Analog Devices

AD515LH - 8-Pin Precision Operational Amplifier | Analog Devices

MPN: AD515LH ✓ সক্রিয়
15 V Vdss Round Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD515LH সারাংশ

The Analog Devices AD515LH is a single-amplifier operational amplifier offered in an 8-terminal, round, wire-lead package with a commercial temperature grade. Its listed nominal supply voltage is 15 V, while the maximum input offset voltage is 1000 uV. The AD515LH belongs to the precision operational-amplifier family used for low-level signal conditioning, instrumentation, feedback control, and sensor-interface circuits.

An operational amplifier is a voltage-gain amplifier intended for open-loop and feedback operation. Its inverting and non-inverting inputs compare two signals, while the output drives the difference between them with the polarity selected by the feedback network. When negative feedback is applied, the closed-loop behavior is primarily determined by external resistors and stable passive components. This makes precision op-amps useful where signal gain, input impedance, offset behavior, and output drive must be evaluated as a complete circuit.

The AD515LH is specified as a commercial-grade part with 8 wire terminals in a round metal-can package. The listed nominal supply voltage of 15 V places it among conventional dual-supply precision-amplifier designs. Its maximum input offset voltage of 1000 uV is an important selection criterion because the input offset error can appear directly at the output of a low-gain precision stage. Designers should include offset and bias-current effects in their error budget rather than treating the amplifier as an ideal component.

The AD515LH is identified in available replacement information as an older AD515-series device, and OPA128 is listed as a replacement for it. Replacement selection requires comparison of package lead assignment, supply range, input offset voltage, input bias current, input voltage range, noise, slew rate, supply current, and operating temperature. A device with a matching package can still require circuit changes if its electrical limits or pin functions differ. The manufacturer datasheet and the pin-description table should be the authority for each replacement.

Typical uses include precision current-to-voltage conversion, low-level transducer amplification, laboratory measurement front ends, feedback control loops, and signal-conditioning modules. In these applications, the external feedback network establishes gain, while layout and guarding become increasingly important as source impedance and required accuracy rise. Stable reference components, short sensitive traces, and careful treatment of ground returns can prevent parasitic effects from overwhelming the intrinsic amplifier performance.

For a new design, verify the exact supply voltage, common-mode input range, output swing, operating temperature range, and electrical limits for the selected ordering code. When replacing an installed AD515LH, compare every lead against the replacement data sheet and account for obsolete-part risk, component tolerances, and any changes in stability or compensation requirements. Use the Request a Quote form on this page for current sourcing information.

This page combines package and sourcing information with a focused drop-in comparison, selection guidance, and practical engineering notes. It distinguishes confirmed electrical attributes from parameters that require direct manufacturer-datasheet confirmation, helping engineers assess the AD515LH for legacy repair, redesign, and precision-signal-chain requirements.

এর জন্য ড্রপ-ইন বিকল্প AD515LH — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD549LHZ

✅ ড্রপ-ইন
📦 TO-99-8
The AD549LHZ is shown as a nearby 8-pin TO-99 precision amplifier; its input bias current and several performance limits differ from the AD515LH, so the exact error and bandwidth trade-offs must be checked.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD504LHZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TO-99-8
The AD504LHZ uses the same 8-pin TO-99 family and provides a low-bias-current precision-amplifier alternative, but offset voltage, bandwidth, and input characteristics differ from the AD515LH.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD547LHZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TO-99-8
The AD547LHZ offers a precision JFET-input solution in the 8-pin TO-99 family; bias current, offset voltage, bandwidth, and supply limits differ from the AD515LH and require circuit-level comparison.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD548LHZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TO-99-8
The AD548LHZ shares the 8-pin TO-99 package family and targets low-bias-current precision applications, while its offset, bandwidth, noise, and input-range characteristics differ from the AD515LH.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OPA128

✅ ড্রপ-ইন
📦 TO-99-8
OPA128 is explicitly identified as an AD515LH replacement and uses an 8-pin TO-99 package, but its offset voltage, bias current, bandwidth, and supply specifications must be compared against the original AD515LH design.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD515LH সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Operational Amplifier
Number of Terminals 8
Temperature Grade Commercial
Terminal Form Wire
Package Shape Round
Nominal Supply Voltage 15 V
Maximum Input Offset Voltage 1000 uV
Circuit Count 1 amplifier
মাউন্টিং টাইপ Through-hole wire lead

AD515LH round পিন কনফিগারেশন গাইড

AD515LH (round প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD515LH-এর জন্য round প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD515LH.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD515LH এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Transducer Measurement, Low-Level Signal Conditioning, Current-to-Voltage Conversion, Laboratory Instrumentation Front End, Feedback Control Loop, Legacy Instrumentation Repair.

🏭

Precision Transducer Measurement

The AD515LH fits a precision transducer-amplifier position when the circuit must amplify a small differential sensor signal and the design can accept the listed 1000 uV maximum input offset voltage. Its 15 V nominal supply fits conventional dual-rail instrumentation architectures, while the single amplifier provides a straightforward differential input stage. The external feedback resistors establish the conversion gain, so their tolerance and temperature coefficient should be included in the measurement uncertainty. Source impedance is equally important: bias-current error can be significant with high-impedance sensors, so the input bias current and common-mode range must be confirmed from the manufacturer data sheet before finalizing the circuit.

🔧

Low-Level Signal Conditioning

The AD515LH is suitable for a low-level signal-conditioning channel when modest offset contribution is acceptable and the desired closed-loop gain can be implemented with stable feedback components. The confirmed 1000 uV maximum input offset voltage is the primary error figure to place into the channel error budget, alongside resistor mismatch and source impedance effects. Its single-amplifier configuration allows a compact implementation around one device rather than requiring separate input and output stages. Check the amplifier's input common-mode range against the sensor's full output span and verify output swing at the required load, because the nominal 15 V supply alone does not describe either operating limit.

💡

Current-to-Voltage Conversion

AD515LH can form the active element of a precision current-to-voltage converter when the target signal is generated by a photodiode, sensor, or resistive branch. A transimpedance circuit places feedback resistance from output to the inverting input, converting input current into output voltage while the non-inverting input establishes the reference. The candidate's 8-terminal round package provides a conventional through-hole implementation, but parasitic capacitance and board leakage become increasingly important as feedback resistance rises. Verify input bias current and input voltage noise in the data sheet, keep the summing node compact, and include guard structures where the required precision cannot tolerate leakage from contaminated or humid board surfaces.

🖥️

Laboratory Instrumentation Front End

The AD515LH is appropriate for a laboratory instrumentation front end where a single precision amplifier must process a bipolar or referenced low-level signal. Its commercial-grade designation and 15 V nominal supply make it relevant to conventional bench equipment built around positive and negative rails. The design should explicitly budget the 1000 uV maximum input offset voltage and confirm that input bias current is low enough for the source impedance. Feedback-component selection, grounding, and guarding can matter more than nominal amplifier speed in a DC measurement path, especially when the output is digitized by a low-resolution converter or used for drift-sensitive calibration.

🏭

Feedback Control Loop

The AD515LH may be used in a feedback-control loop where low-level error signals must be amplified around a bias point and the loop bandwidth remains below the amplifier's verified stability and slew-rate capabilities. The 15 V nominal supply supports ordinary dual-supply control electronics, while the single amplifier can implement an inverting, non-inverting, or differential configuration. Before selecting it, compare the 1000 uV maximum input offset voltage against the minimum control error that the system can tolerate. Check output-current capability, capacitive-load stability, and recovery behavior against the driven plant, and ensure the feedback components are positioned to minimize added phase delay.

🔧

Legacy Instrumentation Repair

AD515LH is especially relevant to repairing legacy 8-pin round-package instrumentation in which changing the PCB land pattern is undesirable and the original amplifier's exact ordering code has become difficult to obtain. Its commercial grade, 8 wire terminals, and 15 V nominal supply identify the legacy circuit class, but the replacement decision must preserve the original lead functions and electrical behavior. OPA128 is identified as a replacement candidate, while AD549LHZ can serve as another same-package precision-amplifier comparison. Validate either choice against offset voltage, bias current, supply limits, output swing, and stability before installation, and retain the original part when its measured performance is uniquely required.

What is the AD515LH?
The AD515LH is a single operational amplifier from Analog Devices in an 8-terminal, round, wire-lead metal-can package. It is classified as a commercial-grade part and has a listed nominal supply voltage of 15 V. According to the Analog Devices AD515 datasheet, the AD515 family is intended for precision analog signal-conditioning applications. Confirm the exact lead assignment and electrical limits against the manufacturer datasheet before substituting it in an existing circuit.
What package does the AD515LH use?
The AD515LH uses an 8-terminal, round, wire-lead package. The verified product information identifies the terminal form as wire, the package shape as round, and the temperature grade as commercial. Because a round metal-can package has a defined physical pin sequence, engineers replacing the part should compare every lead with the package drawing rather than relying only on the generic TO-99 outline. Confirm the lead functions in the AD515 datasheet before PCB assembly.
What is the maximum input offset voltage of AD515LH?
The AD515LH has a listed maximum input offset voltage of 1000 uV. This specification describes the maximum voltage difference between the amplifier's inverting and non-inverting inputs required for the output to reach the specified output range. In a precision measurement circuit, that value must be combined with resistor tolerance, input bias current, source impedance, and drift when calculating total error. The manufacturer AD515 datasheet remains the controlling source for test conditions.
Where can I download the AD515LH datasheet PDF?
The AD515LH datasheet is available through the Analog Devices AD515 document linked on this page. The linked document page provides access to the manufacturer PDF and supports the AD515 family's electrical characteristics, ordering information, and package details. When checking the PDF, match the LH ordering code rather than assuming that every AD515 suffix has the same temperature grade or lead configuration. Use the pin-description table for PCB assignments.
Where can I find the AD515LH pinout?
The AD515LH pinout should be taken from the package drawing and pin-description table in the Analog Devices AD515 datasheet. The device has 8 wire terminals in a round metal-can package, but the verified catalog excerpt does not reproduce each terminal's function. Assign PCB tracks only after matching terminal numbers to the exact package outline and ordering code. Do not infer lead functions from a similarly named amplifier with a different package.
What is the nominal supply voltage of AD515LH?
The listed nominal supply voltage for the AD515LH is 15 V. This identifies the intended center point of its power-supply operating range, but it does not replace the datasheet's minimum and maximum supply ratings. In dual-supply operation, the two rail voltages should remain within those limits while also satisfying the input common-mode and output-swing requirements. Review absolute maximum ratings before selecting bypass capacitors or power-supply regulators.
What can replace the AD515LH?
OPA128 is specifically listed as a replacement for the AD515LH, but it is only a candidate until its pinout and electrical limits are checked against the installed circuit. Replacement also requires comparing input offset voltage, input bias current, common-mode range, output swing, slew rate, supply current, noise, and stability. The AD549LHZ is another nearby precision-amplifier comparison, but the manufacturer data sheets must confirm whether it satisfies the required application and footprint.
Is AD515LH the same as OPA128?
No, the AD515LH and OPA128 are distinct part numbers even though OPA128 is identified as a replacement for the older AD515LH. A replacement claim does not automatically establish identical pin functions or identical electrical performance. Before substituting OPA128, compare all 8 leads, the supply range, input common-mode range, offset voltage, bias current, output drive, and operating temperature. Confirm stability with the feedback network and source impedance used in the design.
AD515LH vs AD549LHZ: which is better for a precision measurement circuit?
The AD515LH is the preferred drop-in candidate when the existing PCB and circuit were designed around its AD515-family characteristics. The AD549LHZ should be selected instead only when its measured accuracy, bias current, supply range, and noise meet the application's requirements and its pin assignment is confirmed. Both are associated with the same 8-pin round package family, but electrical equivalence must be established from the manufacturer data sheets before replacement.
When should I choose AD515LH over a newer precision op-amp?
Choose the AD515LH when maintaining an existing 8-pin round-package circuit, reproducing an approved legacy design, or retaining a qualified amplifier configuration is more important than adopting newer features. A newer precision amplifier may offer lower offset, lower bias current, faster settling, or lower noise, but those improvements do not guarantee direct compatibility. Use the AD515LH for controlled legacy continuity and choose a newer part only after a complete pin and parameter review.
Is AD515LH suitable for sensor-interface and low-level signal conditioning?
The AD515LH can be considered for low-level signal conditioning when its verified 1000 uV maximum input offset voltage is acceptable for the measurement budget and the circuit operates within the manufacturer's electrical limits. Sensor sources with high impedance can amplify input bias-current error, so source resistance and guarding must be evaluated. Confirm input bias current, noise, common-mode range, and supply requirements from the Analog Devices AD515 datasheet.
How should I design the feedback network around AD515LH?
Design the AD515LH feedback network with precision resistors, adequate loop gain, and a topology that remains stable with the actual source and load impedances. Begin with the manufacturer's recommended applications for the AD515 family, then verify the selected resistor values against the amplifier's gain-bandwidth, slew-rate, and output-drive specifications. Keep feedback routing short and place compensation or filtering components where they do not create unwanted signal paths.
Where can I buy AD515LH and check its price and lead time?
Use the Request a Quote form on this page to request the current AD515LH unit price, stock status, minimum order quantity, and production lead time. Because this is a legacy package and ordering code, its commercial availability can vary by supplier and inventory status. Provide the target quantity, required package form, and any date-code or traceability requirements in the request so sourcing can return an actionable quotation.
Is AD515LH currently active?
The AD515LH is listed as active in the available product-status comparison information. Lifecycle status does not by itself guarantee large quantities of every package or ordering variant are immediately available. For a new production program, confirm whether the manufacturer recommends a current device and obtain a written supply commitment. For maintenance demand, request inventory and lead time through the Request a Quote form on this page.
What are the key specifications of AD515LH that engineers should know?
The key confirmed AD515LH attributes are its single operational-amplifier configuration, 8 wire terminals, round package shape, commercial temperature grade, 15 V nominal supply voltage, and 1000 uV maximum input offset voltage. Additional limits such as bias current, bandwidth, slew rate, supply range, and operating temperature require direct confirmation from the manufacturer AD515 datasheet. Those parameters must fit the source impedance, gain, bandwidth, and environmental requirements of the intended circuit.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD515LH — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AD515LH when repairing or reproducing a legacy precision-amplifier circuit that uses an 8-terminal round wire-lead package and tolerates the listed 1000 uV maximum input offset voltage. Choose AD549LHZ when its lower-bias-current behavior and other limits better match a high-impedance source and its exact parameters are verified. Consider AD504LHZ, AD547LHZ, or AD548LHZ when a modern low-bias-current family member offers a suitable error profile while preserving the TO-99 footprint. Choose OPA128 when the explicit replacement path and its manufacturer data sheet satisfy the original supply, common-mode, output-swing, bandwidth, and stability requirements. In every case, verify all eight lead assignments and compare the complete error budget rather than relying on package appearance alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD549LHZ AD504LHZ AD547LHZ AD548LHZ OPA128
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Package 8-terminal round wire-lead package TO-99-8 TO-99-8 TO-99-8 TO-99-8 TO-99-8
Number of Circuits 1 1 1 1 1 1
Replacement Status AD515LH Nearby precision-amplifier comparison Low-bias-current precision-amplifier alternative Low-bias-current precision-amplifier alternative Low-bias-current precision-amplifier alternative Explicitly identified as an AD515LH replacement

মূল পার্থক্যসমূহ

  • Legacy-compatible commercial precision-amplifier package (বনামOPA128)
  • Lower maximum input offset voltage than the AD549LHZ comparison (বনামAD549LHZ)
  • Same-package legacy continuity (বনামAD547LHZ)
  • Explicit replacement path with package compatibility (বনামOPA128)

ডিজাইন নোট

Do not treat every AD515-family ordering code as automatically interchangeable. The AD515LH is identified as a commercial-grade, 8-terminal wire-lead device with a 15 V nominal supply and 1000 uV maximum input offset voltage. Before replacing it, compare all eight lead functions and verify the replacement's supply range, common-mode range, output swing, input bias current, and offset voltage. A package outline match alone does not establish electrical compatibility.

Keep the amplifier's inverting-input and feedback nodes physically compact, especially in a transimpedance or high-gain configuration. Route sensitive input conductors away from power-switching nodes and provide a clean ground-return path beneath the measurement circuit. Guarding may be necessary when source impedance is high or board contamination can create leakage comparable with the specified input-bias-current error. Confirm the exact input-bias-current limit in the manufacturer data sheet before fixing the required board cleanliness level.

Use precision feedback resistors and include their tolerance and temperature coefficient in the closed-loop accuracy calculation. The AD515LH's listed maximum input offset voltage is 1000 uV, so for a non-inverting stage with gain G, its maximum direct output contribution is the offset multiplied by G. This calculation is an estimate based on the published maximum offset and the selected noise gain; verify actual accuracy through circuit simulation and measurement using the final source and load conditions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The AD515LH is a commercial-grade legacy operational amplifier. Compliance declarations for RoHS, REACH, lead-free status, halogen-free status, and conflict minerals require confirmation from the manufacturer or authorized sourcing documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ad515lh op amp AD515LH datasheet AD515LH datasheet pdf AD515LH pinout AD515LH specifications AD515LH replacement AD515LH equivalent AD515LH cross reference AD515LH vs OPA128 AD515LH TO-99 pinout AD515LH price AD515LH stock Analog Devices AD515LH AD515LH precision measurement amplifier

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD515LH AD515 AD549LHZ AD504LHZ AD547LHZ AD548LHZ OPA128 Texas Instruments Operational Amplifier Precision Amplifier JFET Input Signal Conditioning Instrumentation Amplifier Transimpedance Amplifier Feedback Control Input Offset Voltage Input Bias Current Common-Mode Voltage Range Slew Rate TO-99-8 Round Metal-Can Package Through-Hole Package RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন