Analog Devices

AD604AN - Dual Ultralow Noise Variable Gain Amplifier | Analog Devices

MPN: AD604AN ✓ সক্রিয়
24-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD604AN সারাংশ

Analog Devices AD604AN is a dual-channel, ultralow-noise variable gain amplifier (VGA) optimized for time-based variable gain control in ultrasound systems, with broader suitability for low-noise, wide-bandwidth signal chains. The device provides independent amplification control for two channels and is available in a 24-pin PDIP package. Its defining role is to adjust signal amplitude over a broad dynamic range while maintaining accurate, logarithmic-in-decibel control where precise gain calibration is required.

A variable gain amplifier is an amplifier whose gain can be electronically adjusted by an external control voltage. In a dual-channel implementation, each channel has its own gain-control path, allowing simultaneous processing of two related signals. This makes the category useful in systems that need matched channel behavior, including diagnostic imaging, receiver front ends, instrumentation, and other wide-dynamic-range analog systems. The VGA sits between a source and a downstream converter, amplifier, or processing stage.

The AD604AN is distinguished by its ultralow-noise design, accurate gain behavior, and linear-in-dB control characteristic. These characteristics allow gain to be adjusted through a logarithmic relationship rather than a linear resistance or capacitance law, simplifying control-system calibration. The dual-channel architecture also reduces the need to duplicate external gain-control circuitry when two channels require coordinated attenuation or amplification.

Analog Devices identifies the AD604 family as suitable not only for ultrasound but also for applications requiring low noise and wide bandwidth. This makes the device relevant to receiver chains in which small input signals must be amplified before digitization. The gain-control input is the key system interface, while the two amplified signal paths provide the core signal-processing function. Exact bandwidth, gain range, noise density, control-voltage range, and operating limits must be selected from the manufacturer datasheet for the target design.

Typical uses include ultrasound receiver channels, dual-axis signal acquisition, low-level instrumentation, and precision measurement systems. In ultrasound, the VGA can vary channel gain as echo strength changes while maintaining a predictable logarithmic control relationship. Dual processing paths are also useful when two sensor outputs require similar amplification before subsequent processing. Care should be taken to keep signal traces short, maintain clean power and ground distribution, and observe the manufacturer’s input, output, and gain-control voltage limits.

This page organizes the AD604AN product identity, verified technical attributes, sourcing information, pin-assignment considerations, and same-package alternatives. It also distinguishes the target 24-pin PDIP configuration from other AD604 orderable forms. Use the Analog Devices datasheet and product page as the authoritative references for pin functions, recommended operating conditions, gain tables, noise characteristics, and application-circuit values.

এর জন্য ড্রপ-ইন বিকল্প AD604AN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible AD604AN (একই form factor এবং footprint) — পার্থক্য রয়েছে Mounting Type, Product Type.

Analog Devices
Mounting Type: Through-hole
Product Type: Dual variable gain amplifier
এর সাথে তুলনা করুন AD604AN →

AD604ANZ

✅ ড্রপ-ইন
Analog Devices
📦 24-pin PDIP
Dual variable gain amplifier · 2 channels · Linear in dB · Ultralow noise · Time-based variable gain control for ultrasound

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

AD604ANZRL

✅ ড্রপ-ইন
📦 24-pin PDIP
Commercial ordering suffix differs; tape-and-reel ordering code rather than a different amplifier function

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD604AN-RL

✅ ড্রপ-ইন
📦 24-pin PDIP
Commercial ordering suffix differs; confirm reel orientation and termination details against the ordering guide

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD604AN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Dual-channel variable gain amplifier
Channel Count 2 channels
Gain Control Linear-in-dB
Noise Characteristic Ultralow noise
Primary Application Ultrasound time-based variable gain control
Package Type 24-pin PDIP
পিন সংখ্যা 24 pins
মাউন্টিং টাইপ Through-hole PDIP

AD604AN 24-pin pdip পিন কনফিগারেশন গাইড

AD604AN (24-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD604AN-এর জন্য 24-pin pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD604AN.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD604AN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Ultrasound Receiver Gain Control, Dual-Channel Medical Signal Acquisition, Precision Instrumentation Amplification, Industrial Sensor Signal Conditioning, Wide-Dynamic-Range Receiver Front End, Test and Measurement Signal Capture.

🩺

Ultrasound Receiver Gain Control

The AD604AN is a natural fit for dual ultrasound receiver channels because it combines an ultralow-noise variable gain amplifier with linear-in-dB control in a 24-pin PDIP package. Each channel can vary amplification as echo strength changes, helping the receiver maintain a useful signal range across a wide dynamic span. The dual architecture can support paired receive paths without duplicating separate VGA stages. Before implementation, verify the required bandwidth, gain range, control-voltage range, settling behavior, and allowed input levels from the manufacturer datasheet.

💊

Dual-Channel Medical Signal Acquisition

The AD604AN can support two low-level medical or diagnostic signal paths that benefit from adjustable gain and low-noise amplification. Linear-in-dB control makes it easier to relate attenuation or gain commands to a calibrated system response, while the dual-channel arrangement preserves matched functionality between related sensors. A suitable front end should present signals within the amplifier’s specified bandwidth and common-mode range. Design the gain-control network, decoupling, grounding, and downstream converter interface around the electrical limits published by Analog Devices.

🔧

Precision Instrumentation Amplification

The AD604AN’s ultralow-noise, dual-channel VGA architecture is useful in instrumentation that must adjust amplification before measurement or conversion. A pair of sensors or differential signal nodes can each be routed through a controlled amplification stage, reducing the need for separate gain-control devices and supporting systematic calibration. The primary design trade-off is that the selected gain and control voltage must remain within the AD604AN’s specified operating region. Grounding and power distribution should follow the manufacturer application circuit to preserve low-noise operation.

🏭

Industrial Sensor Signal Conditioning

AD604AN can serve as an adjustable gain stage for industrial sensors whose output amplitude changes over a wide operating range. Linear-in-dB control allows a controller to request attenuation or amplification using a predictable logarithmic relationship, while the dual-channel construction accommodates two related sensor outputs. Noise performance is particularly valuable when weak signals must be conditioned before downstream processing. The design must confirm bandwidth, signal polarity, input range, and gain-control limits for each sensor, then preserve short analog paths and clean ground returns.

📻

Wide-Dynamic-Range Receiver Front End

The AD604AN is applicable when a receiver must accommodate small and large input amplitudes without relying on a fixed-gain amplifier. The variable, linear-in-dB gain control provides a way to reduce gain for strong signals and increase it for weak signals, improving utilization of the receiver’s downstream conversion range. Its dual-channel form allows coordinated control of two receiver paths. Validation should include settling time, channel matching, noise behavior, and control-voltage headroom under the intended signal bandwidth and environmental conditions.

📊

Test and Measurement Signal Capture

AD604AN can be used in test and measurement front ends where the input level is predictable but varies across a broad range. The dual VGA structure provides two adjustable gain paths for instrumented or comparative measurements, and its ultralow-noise characteristic supports conditioning of low-amplitude signals. Engineers should choose gain settings that keep every signal within the manufacturer’s electrical limits and verify that the control interface can achieve the required logarithmic attenuation. PCB layout and grounding should minimize interference around the high-gain sections.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What is the AD604AN?
The AD604AN is a dual-channel, ultralow-noise, linear-in-dB variable gain amplifier from Analog Devices, supplied in a 24-pin PDIP package. According to the Analog Devices AD604 product page, it is optimized for time-based variable gain control in ultrasound while also supporting low-noise, wide-bandwidth applications that require precise electronic gain adjustment. Each of its two channels can provide independently controlled amplification for dual-signal receiver systems.
What are the key specifications of AD604AN that engineers should know?
The AD604AN is a dual-channel, ultralow-noise variable gain amplifier with linear-in-dB gain control in a 24-pin PDIP package. Analog Devices identifies ultrasound time-based variable gain control as the principal application, while also positioning the family for wider-bandwidth, low-noise signal chains. Exact gain range, bandwidth, noise density, supply limits, and control-voltage boundaries must be confirmed from the manufacturer datasheet for the operating conditions used in a particular design.
Where can I download the AD604AN datasheet PDF?
The official AD604AN datasheet PDF is available from Analog Devices at the manufacturer data-sheet URL listed on this page. The PDF should be used to verify the complete 24-pin PDIP pin description, electrical characteristics, gain-control relationship, noise specifications, recommended application circuit, and operating limits. The Analog Devices product page provides the matching family-level product information and links to technical documentation.
Where can I find the AD604AN pinout?
The AD604AN pinout is defined in the manufacturer datasheet, which covers the 24-pin PDIP configuration represented by the AD604AN order code. Use the pin-description table and package drawing when assigning PCB nets or checking signal, power, ground, and gain-control connections. A complete pin-by-pin assignment cannot be reproduced confidently without the manufacturer’s pin-description table, so the package diagram should be consulted directly.
What can replace the AD604AN?
The closest documented replacements for AD604AN are the same-family AD604ANZ, AD604ANZRL, and AD604AN-RL order codes, subject to confirmation of temperature grade, lead-finish code, and reel or tray packaging. These are commercial order variants rather than functionally different amplifiers. For a drop-in PCB substitution, verify the suffix, package, pin mapping, electrical grade, and documentation before changing the bill of materials.
Is the AD604AN the same as the AD604ANZ?
The AD604AN and AD604ANZ identify the same AD604AN dual variable gain amplifier in the 24-pin PDIP configuration, with the suffix distinguishing the commercial ordering or termination code. The listing for AD604ANZ describes a dual variable gain amplifier in a 24-PDIP package. Engineers should still check the suffix-specific temperature range, package drawing, and lifecycle information before treating the parts as interchangeable.
AD604AN versus AD604ANZ: which version should be selected?
AD604ANZ is the appropriate candidate when the required order code calls for the lead-free or otherwise distinct commercial suffix, while AD604AN is the target standard order code. Both appear in the same 24-pin PDIP family and are expected to share the core dual-channel variable-gain-amplifier function. Final selection should follow the manufacturer’s ordering guide, particularly for temperature grade, termination finish, availability, and production requirements.
When should I choose AD604AN over another dual variable gain amplifier?
Choose AD604AN when the design requires a dual-channel variable gain amplifier with linear-in-dB control, ultralow-noise behavior, and a 24-pin PDIP implementation. Analog Devices specifically identifies the family for ultrasound time-based gain control, making it appropriate when paired receive channels need coordinated gain adjustment. A different VGA should be selected only when its control interface, gain range, bandwidth, supply voltage, package, or noise performance satisfies the system requirements.
Is the AD604AN suitable for ultrasound receiver applications?
Yes, the AD604AN is specifically optimized for time-based variable gain control in ultrasound receivers. Its dual-channel architecture supports two amplifier paths, while its linear-in-dB control and ultralow-noise design align with wide-dynamic-range echo acquisition. The signal-chain design must still verify input bandwidth, allowable signal levels, gain-control limits, settling behavior, and channel-to-channel performance against the manufacturer datasheet.
What is the best Analog Devices equivalent for AD604AN?
The best documented Analog Devices ordering equivalent is AD604ANZ because it is explicitly listed as a 24-PDIP, dual-circuit variable gain amplifier from the same AD604AN family. AD604ANZRL and AD604AN-RL are additional same-series order codes identified for evaluation, but they may differ in tape-and-reel or commercial termination. No independent cross-brand substitute is established by the available cross-reference information.
How should power and ground be managed for the AD604AN?
Power and ground management should be planned according to the Analog Devices AD604 datasheet because optimum noise performance depends on clean supply delivery and effective grounding. The manufacturer notes that large dynamic currents arise from the low resistances needed to achieve the desired noise performance. Use short supply and ground paths, place decoupling close to the relevant pins, and compare the application circuit in the manufacturer documentation before finalizing the layout.
Does the AD604AN need a heatsink?
The need for a heatsink depends on supply voltage, dissipated power, ambient temperature, board construction, and the package’s thermal resistance under the actual operating conditions. Those numerical limits must be obtained from the AD604 datasheet and compared with the design’s worst-case load condition. Use the exposed board area and thermal data rather than assuming that the 24-pin PDIP package requires or eliminates thermal management.
Where can I buy AD604AN online?
The AD604AN can be requested through the Request a Quote form on this page, which is the appropriate channel for current unit availability, order quantity, and lead-time confirmation. The product is identified as a dual variable gain amplifier in a 24-pin PDIP package. Request the exact suffix AD604AN when ordering and confirm authorized lifecycle status, traceability, and delivery terms as part of the quotation.
What is the price of AD604AN?
Current AD604AN price, quantity breaks, and lead time should be requested through the Request a Quote form on this page. The price structure rendered on the page is refreshed from structured sourcing data and may vary with order quantity and availability. Buyers should request the exact AD604AN suffix, reel or tray requirement, delivery destination, and any required traceability documentation when obtaining a quotation.
Is AD604AN in stock and what is its lead time?
Current AD604AN stock and lead time should be confirmed through the Request a Quote form on this page because availability for this order code can change with market conditions and shipment location. State the required quantity, package orientation, target date, and any inspection or traceability requirements. The Request a Quote response provides the most appropriate sourcing commitment for the exact AD604AN configuration.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD604AN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose AD604AN for a dual-channel, ultralow-noise VGA design that requires linear-in-dB gain control and a 24-pin PDIP footprint, particularly for ultrasound receiver gain control. AD604ANZ is the practical same-family choice when the approved order code requires that commercial suffix, while AD604ANZRL and AD604AN-RL may suit production arrangements requiring a particular reel or termination format. Confirm each suffix against the Analog Devices ordering guide before release. None of these alternatives changes the core dual-VGA function; their meaningful differences are commercial packaging, termination, and ordering attributes. A different VGA should be considered only if the system cannot meet bandwidth, gain range, noise, supply, or control-voltage requirements. Because no independently documented cross-brand pin-compatible part was identified, a cross-manufacturer substitution would require a complete engineering review rather than a suffix-level interchange.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD604ANZ AD604ANZRL AD604AN-RL
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-pin PDIP 24-pin PDIP 24-pin PDIP 24-pin PDIP
Product Type Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier Dual variable gain amplifier
Channel Count 2 channels 2 channels 2 channels 2 channels
Gain Control Characteristic Linear-in-dB Linear-in-dB Linear-in-dB Linear-in-dB
Noise Characteristic Ultralow noise Ultralow noise Ultralow noise Ultralow noise
Primary Application Time-based variable gain control in ultrasound Same AD604AN family application Same AD604AN family application Same AD604AN family application
Commercial Suffix AD604AN AD604ANZ suffix AD604ANZRL suffix AD604AN-RL suffix

মূল পার্থক্যসমূহ

  • Dual-channel variable gain in one package (বনামAD604ANZ)
  • Ultralow-noise gain control for weak signals (বনামAD604ANZRL)
  • Linear-in-dB control simplifies calibrated attenuation (বনামAD604AN-RL)

ডিজাইন নোট

Analog Devices states that power and ground management are critical to achieving the AD604’s optimum specifications because low internal resistances produce large dynamic currents. Place input, output, and gain-control decoupling components directly beside their associated pins, keep supply and ground paths short, and avoid routing sensitive gain-control and signal traces through noisy digital areas. Follow the manufacturer application circuit and pin-description table when assigning the 24-pin PDIP footprint.

Preserve the integrity of both amplified signal paths and their gain-control inputs by keeping traces short, routing away from clocks, switching converters, and high-current return paths, and terminating unused inputs according to the datasheet. Verify signal amplitude and bandwidth at every gain setting. Because a linear-in-dB VGA may be adjusted over a broad range, the control network should not introduce noise, instability, or excessive parasitic capacitance at the gain-control pins.

Do not assume that every AD604 order suffix is a universally interchangeable commercial variant without checking the manufacturer ordering guide. Compare package orientation, temperature grade, termination finish, reel format, and lifecycle status before replacing AD604AN with AD604ANZ, AD604ANZRL, or AD604AN-RL. Also avoid substituting a cross-family VGA solely because it is also dual channel; gain range, bandwidth, noise, control voltage, and pin behavior must match the system requirements.

Estimate dissipation from the actual supply voltage and channel operating current, then compare the resulting junction-temperature rise with the package and board thermal limits published by Analog Devices. The 24-pin PDIP footprint offers substantial through-hole thermal conduction, but copper area, airflow, and adjacent heat sources still affect performance. Use worst-case supply, gain, output, and ambient conditions rather than a nominal operating point when evaluating thermal margin.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit compliance declaration was identified for the exact AD604AN order code. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status against the manufacturer product documentation or the specific order-code declaration before production use.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD604AN datasheet AD604AN pinout AD604AN datasheet pdf AD604AN equivalent AD604AN replacement AD604AN cross reference AD604AN vs AD604ANZ AD604AN 24-PDIP pinout AD604AN ultrasound amplifier AD604AN dual variable gain amplifier AD604AN price AD604AN stock Analog Devices AD604AN AD604AN linear-in-dB gain control

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD604 AD604AN AD604ANZ AD604ANZRL AD604AN-RL variable gain amplifier VGA dual-channel amplifier linear-in-dB gain control ultralow-noise amplifier semiconductor integrated circuit 24-pin PDIP PDIP package through-hole package ultrasound receiver medical signal acquisition industrial signal conditioning test and measurement gain-control voltage power management ground management surface-mount and through-hole integrated circuits
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন