AD604AN - Dual Ultralow Noise Variable Gain Amplifier | Analog Devices
MPN: AD604AN ✓ ActiveAD604AN Overview
A variable gain amplifier is an amplifier whose gain can be electronically adjusted by an external control voltage. In a dual-channel implementation, each channel has its own gain-control path, allowing simultaneous processing of two related signals. This makes the category useful in systems that need matched channel behavior, including diagnostic imaging, receiver front ends, instrumentation, and other wide-dynamic-range analog systems. The VGA sits between a source and a downstream converter, amplifier, or processing stage.
The AD604AN is distinguished by its ultralow-noise design, accurate gain behavior, and linear-in-dB control characteristic. These characteristics allow gain to be adjusted through a logarithmic relationship rather than a linear resistance or capacitance law, simplifying control-system calibration. The dual-channel architecture also reduces the need to duplicate external gain-control circuitry when two channels require coordinated attenuation or amplification.
Analog Devices identifies the AD604 family as suitable not only for ultrasound but also for applications requiring low noise and wide bandwidth. This makes the device relevant to receiver chains in which small input signals must be amplified before digitization. The gain-control input is the key system interface, while the two amplified signal paths provide the core signal-processing function. Exact bandwidth, gain range, noise density, control-voltage range, and operating limits must be selected from the manufacturer datasheet for the target design.
Typical uses include ultrasound receiver channels, dual-axis signal acquisition, low-level instrumentation, and precision measurement systems. In ultrasound, the VGA can vary channel gain as echo strength changes while maintaining a predictable logarithmic control relationship. Dual processing paths are also useful when two sensor outputs require similar amplification before subsequent processing. Care should be taken to keep signal traces short, maintain clean power and ground distribution, and observe the manufacturer’s input, output, and gain-control voltage limits.
This page organizes the AD604AN product identity, verified technical attributes, sourcing information, pin-assignment considerations, and same-package alternatives. It also distinguishes the target 24-pin PDIP configuration from other AD604 orderable forms. Use the Analog Devices datasheet and product page as the authoritative references for pin functions, recommended operating conditions, gain tables, noise characteristics, and application-circuit values.
Drop-in alternatives for AD604AN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD604AN (same form factor and footprint) — differing in Mounting Type, Product Type.
AD604ANZ
✅ Drop-InContact for price
View Datasheet →AD604ANZRL
✅ Drop-In📋 Reference alternative (not in catalog)
AD604AN-RL
✅ Drop-In📋 Reference alternative (not in catalog)
AD604AN Maximum Ratings & Electrical Characteristics
| Product Type | Dual-channel variable gain amplifier |
| Channel Count | 2 channels |
| Gain Control | Linear-in-dB |
| Noise Characteristic | Ultralow noise |
| Primary Application | Ultrasound time-based variable gain control |
| Package Type | 24-pin PDIP |
| Pin Count | 24 pins |
| Mounting Type | Through-hole PDIP |
AD604AN 24-pin pdip Pin Configuration Guide
Pin configuration for AD604AN (24-pin pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD604AN.
Refer to the datasheet for full pin configuration.
Typical Applications
AD604AN is suitable for 6 applications: Ultrasound Receiver Gain Control, Dual-Channel Medical Signal Acquisition, Precision Instrumentation Amplification, Industrial Sensor Signal Conditioning, Wide-Dynamic-Range Receiver Front End, Test and Measurement Signal Capture.
Ultrasound Receiver Gain Control
The AD604AN is a natural fit for dual ultrasound receiver channels because it combines an ultralow-noise variable gain amplifier with linear-in-dB control in a 24-pin PDIP package. Each channel can vary amplification as echo strength changes, helping the receiver maintain a useful signal range across a wide dynamic span. The dual architecture can support paired receive paths without duplicating separate VGA stages. Before implementation, verify the required bandwidth, gain range, control-voltage range, settling behavior, and allowed input levels from the manufacturer datasheet.
Recommended
Dual-Channel Medical Signal Acquisition
The AD604AN can support two low-level medical or diagnostic signal paths that benefit from adjustable gain and low-noise amplification. Linear-in-dB control makes it easier to relate attenuation or gain commands to a calibrated system response, while the dual-channel arrangement preserves matched functionality between related sensors. A suitable front end should present signals within the amplifier’s specified bandwidth and common-mode range. Design the gain-control network, decoupling, grounding, and downstream converter interface around the electrical limits published by Analog Devices.
Recommended
Precision Instrumentation Amplification
The AD604AN’s ultralow-noise, dual-channel VGA architecture is useful in instrumentation that must adjust amplification before measurement or conversion. A pair of sensors or differential signal nodes can each be routed through a controlled amplification stage, reducing the need for separate gain-control devices and supporting systematic calibration. The primary design trade-off is that the selected gain and control voltage must remain within the AD604AN’s specified operating region. Grounding and power distribution should follow the manufacturer application circuit to preserve low-noise operation.
Recommended
Industrial Sensor Signal Conditioning
AD604AN can serve as an adjustable gain stage for industrial sensors whose output amplitude changes over a wide operating range. Linear-in-dB control allows a controller to request attenuation or amplification using a predictable logarithmic relationship, while the dual-channel construction accommodates two related sensor outputs. Noise performance is particularly valuable when weak signals must be conditioned before downstream processing. The design must confirm bandwidth, signal polarity, input range, and gain-control limits for each sensor, then preserve short analog paths and clean ground returns.
Recommended
Wide-Dynamic-Range Receiver Front End
The AD604AN is applicable when a receiver must accommodate small and large input amplitudes without relying on a fixed-gain amplifier. The variable, linear-in-dB gain control provides a way to reduce gain for strong signals and increase it for weak signals, improving utilization of the receiver’s downstream conversion range. Its dual-channel form allows coordinated control of two receiver paths. Validation should include settling time, channel matching, noise behavior, and control-voltage headroom under the intended signal bandwidth and environmental conditions.
Recommended
Test and Measurement Signal Capture
AD604AN can be used in test and measurement front ends where the input level is predictable but varies across a broad range. The dual VGA structure provides two adjustable gain paths for instrumented or comparative measurements, and its ultralow-noise characteristic supports conditioning of low-amplitude signals. Engineers should choose gain settings that keep every signal within the manufacturer’s electrical limits and verify that the control interface can achieve the required logarithmic attenuation. PCB layout and grounding should minimize interference around the high-gain sections.
Recommended
Recommended Products Summary
Engineering reference data for AD604AN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD604ANZ | AD604ANZRL | AD604AN-RL |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP |
| Product Type | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain Control Characteristic | Linear-in-dB | Linear-in-dB | Linear-in-dB | Linear-in-dB |
| Noise Characteristic | Ultralow noise | Ultralow noise | Ultralow noise | Ultralow noise |
| Primary Application | Time-based variable gain control in ultrasound | Same AD604AN family application | Same AD604AN family application | Same AD604AN family application |
| Commercial Suffix | AD604AN | AD604ANZ suffix | AD604ANZRL suffix | AD604AN-RL suffix |
Key Differentiators
- Dual-channel variable gain in one package (vs AD604ANZ)
- Ultralow-noise gain control for weak signals (vs AD604ANZRL)
- Linear-in-dB control simplifies calibrated attenuation (vs AD604AN-RL)
Design Notes
Analog Devices states that power and ground management are critical to achieving the AD604’s optimum specifications because low internal resistances produce large dynamic currents. Place input, output, and gain-control decoupling components directly beside their associated pins, keep supply and ground paths short, and avoid routing sensitive gain-control and signal traces through noisy digital areas. Follow the manufacturer application circuit and pin-description table when assigning the 24-pin PDIP footprint.
Preserve the integrity of both amplified signal paths and their gain-control inputs by keeping traces short, routing away from clocks, switching converters, and high-current return paths, and terminating unused inputs according to the datasheet. Verify signal amplitude and bandwidth at every gain setting. Because a linear-in-dB VGA may be adjusted over a broad range, the control network should not introduce noise, instability, or excessive parasitic capacitance at the gain-control pins.
Do not assume that every AD604 order suffix is a universally interchangeable commercial variant without checking the manufacturer ordering guide. Compare package orientation, temperature grade, termination finish, reel format, and lifecycle status before replacing AD604AN with AD604ANZ, AD604ANZRL, or AD604AN-RL. Also avoid substituting a cross-family VGA solely because it is also dual channel; gain range, bandwidth, noise, control voltage, and pin behavior must match the system requirements.
Estimate dissipation from the actual supply voltage and channel operating current, then compare the resulting junction-temperature rise with the package and board thermal limits published by Analog Devices. The 24-pin PDIP footprint offers substantial through-hole thermal conduction, but copper area, airflow, and adjacent heat sources still affect performance. Use worst-case supply, gain, output, and ambient conditions rather than a nominal operating point when evaluating thermal margin.
Compliance Information
No explicit compliance declaration was identified for the exact AD604AN order code. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status against the manufacturer product documentation or the specific order-code declaration before production use.