AD625ADZ - 25MHz Programmable Gain Amplifier | Analog Devices
MPN: AD625ADZ ✓ সক্রিয়AD625ADZ সারাংশ
An instrumentation amplifier is a precision analog signal-conditioning amplifier optimized for measuring small differential signals superimposed on a large common-mode voltage. Its internal topology amplifies the difference between two inputs while rejecting common-mode noise. In the broader component hierarchy, the AD625 belongs to instrumentation amplifiers, a specialized class of amplifier ICs used in sensor measurement, data acquisition, medical instrumentation, and industrial control systems.
Programmable gain is the AD625ADZ's defining feature. The manufacturer identifies gains of 1 through 10,000 as user programmable, supporting both conventional resistor-selected gain and software-controlled measurement systems. A maximum gain error of 0.02% and gain temperature coefficient of 5 ppm/°C support repeatable scaling across changing temperatures. The specified 25 MHz gain-bandwidth product and 5 V/µs slew rate provide bandwidth for dynamically changing measurement signals rather than only static voltages.
The AD625's low-noise and precision characteristics make it suitable for demanding front ends. The published input-noise figure is 4 nV/√Hz at 1 kHz, while the listed low nonlinearity of 0.001% helps limit distortion when large differential signals are amplified. Its instrumentation-amplifier architecture supports bridge, current-loop, and other differential sensing arrangements where input bias current, offset, common-mode rejection, and gain accuracy can affect measurement quality.
Typical uses include weighing systems based on load cells, precision pressure and strain-gauge bridges, biomedical instrumentation, industrial process monitoring, and high-resolution data-acquisition channels. The ability to select a gain close to the full-scale differential input can improve use of the downstream converter's input range and reduce demands on its analog signal chain. Digital control of gain is also useful when measurements span several magnitudes.
A critical design consideration is gain implementation around the instrumentation amplifier. Follow the manufacturer's gain-setting table and observe the specified resistor values and tolerances because gain accuracy depends on both the amplifier and the external network. Provide adequate bypassing at the supply pins, maintain a common ground reference, and verify input and output voltage limits against the selected gain before connecting sensors or converters.
This product record combines the manufacturer's product information with pin-compatible family options and practical design guidance. It helps engineers distinguish the ceramic-DIP AD625ADZ from other AD625 package and temperature-grade variants while supporting component selection, schematic planning, and signal-chain design for precision measurement systems.
এর জন্য ড্রপ-ইন বিকল্প AD625ADZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible AD625ADZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Slew Rate, Number of Circuits, Amplifier Type, Input Bias Current.
AD625CDZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD625BDZ
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD625JNZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD625JN
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD625JNZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD625ADZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Amplifier Type | Programmable-gain instrumentation amplifier |
| Number of Circuits | 1 |
| User-Programmed Gain Range | 1 to 10,000 |
| Gain-Bandwidth Product | 25 MHz |
| Small-Signal Bandwidth | 0.65 MHz |
| Slew Rate | 5 V/µs |
| Maximum Low Gain Error | 0.02% |
| Maximum Low Gain Temperature Coefficient | 5 ppm/°C |
| Maximum Low Nonlinearity | 0.001% |
| Input Noise Density | 4 nV/√Hz at 1 kHz |
| Maximum Offset Voltage | 25 µV |
| প্যাকেজ | 16-CDIP, 0.300-inch (7.62 mm) width |
| Packaging | Tube |
| মাউন্টিং টাইপ | Through-hole |
AD625ADZ 16-cdip, 0.300-inch (7.62 mm) width পিন কনফিগারেশন গাইড
AD625ADZ (16-cdip, 0.300-inch (7.62 mm) width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD625ADZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AD625ADZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Load-Cell Weighing Systems, Strain-Gauge Pressure Measurement, Medical Patient Monitoring, Industrial Sensor Acquisition, Precision Data-Acquisition Systems, Current-Shunt Measurement.
Load-Cell Weighing Systems
The AD625ADZ fits precision load-cell front ends because its user-programmable gain of 1 to 10,000 can scale the small differential bridge output while its input noise is 4 nV/√Hz at 1 kHz. The instrumentation-amplifier arrangement rejects common-mode voltage present across the bridge, allowing the circuit to remain sensitive to the millivolt-level sensor signal. Place it at the bridge input and follow the manufacturer gain network to obtain predictable 0.02% maximum low gain error. This is particularly useful when multiple weight ranges require programmable scaling, although bridge excitation, common-mode range, and output swing must remain within the circuit limits.
সুপারিশকৃত
Strain-Gauge Pressure Measurement
The AD625ADZ is suitable for strain-gauge pressure transducers that produce a small differential signal on a substantial common-mode voltage. Its programmable gain up to 10,000 provides the scaling required to use a larger portion of the downstream converter's input range, while 0.001% maximum low nonlinearity supports accurate measurement at relatively high gain. The 25 MHz gain-bandwidth product and 5 V/µs slew rate allow the front end to handle changing sensor conditions. Designers should verify the selected gain against output headroom and use the manufacturer's resistor values and common-mode limits to avoid saturation.
সুপারিশকৃত
Medical Patient Monitoring
The AD625ADZ can serve as the differential input stage in medical monitoring equipment where biopotential or sensor signals are much smaller than the surrounding common-mode voltage. Its 4 nV/√Hz input noise at 1 kHz and programmable gain up to 10,000 help preserve weak physiological information during amplification. The AD625 architecture is intended to provide gain accuracy and common-mode rejection for precision measurement rather than general-purpose signal conditioning. A medical design must additionally evaluate patient protection, isolation, applicable regulatory requirements, input protection, and the exact qualified supply and temperature conditions for the selected ordering option.
সুপারিশকৃত
Industrial Sensor Acquisition
The AD625ADZ is appropriate for industrial sensor-acquisition channels that combine low-level differential outputs with substantial ground offsets or switching noise. Programmable gains from 1 to 10,000 let one analog front end cover multiple sensor ranges, and the 5 V/µs slew rate supports signals that change during the measurement cycle. Its 0.02% maximum low gain error and 5 ppm/°C gain temperature coefficient help maintain scaling across operating-temperature changes. Use appropriate input protection and shielding, verify the common-mode input range, and place bypass capacitors close to the supply pins to reduce susceptibility to industrial interference.
সুপারিশকৃত
Precision Data-Acquisition Systems
The AD625ADZ supports high-resolution data-acquisition systems that need selectable gain, low input noise, and accurate measurement scaling. A 25 MHz gain-bandwidth product provides more bandwidth than the listed 0.65 MHz small-signal bandwidth used for accurate signal measurement, while the 4 nV/√Hz noise specification supports high-resolution conversion. The device can be configured across gains from 1 to 10,000 as input amplitude changes. Use the appropriate external gain-setting components from the manufacturer reference circuit and verify settling behavior, converter input range, grounding, and common-mode limits for the selected sample rate.
সুপারিশকৃত
Current-Shunt Measurement
The AD625ADZ can measure small voltage drops across low-value current shunts when the signal of interest is differential and common-mode voltage is present. Its programmable gain up to 10,000 increases sensitivity to the shunt voltage, while low input noise helps retain resolution at low current levels. The instrumentation amplifier configuration provides a practical way to reject system ground differences without relying on a general-purpose operational amplifier. The measurement remains dependent on shunt resistance, bandwidth, offset behavior, and error from the external gain network, so select the bandwidth and gain combination carefully and confirm that the shunt's common-mode voltage stays within the input limits.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD625ADZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | AD625CDZ | AD625BDZ | AD625JNZ | AD625JN | AD625JNZ |
|---|---|---|---|---|---|---|
| Package | 16-CDIP (0.300-inch, 7.62 mm) | 16-CDIP (0.300-inch, 7.62 mm) | 16-CDIP (0.300-inch, 7.62 mm) | 16-CDIP (0.300-inch, 7.62 mm) | 16-pin DIP (0.300-inch, 7.62 mm) | 16-CDIP (0.300-inch, 7.62 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Type | Programmable-gain instrumentation amplifier | Programmable-gain instrumentation amplifier | Programmable-gain instrumentation amplifier | Programmable-gain instrumentation amplifier | Programmable-gain instrumentation amplifier | Programmable-gain instrumentation amplifier |
| Number of Circuits | 1 | 1 | 1 | 1 | 1 | 1 |
| User-Programmed Gain Range | 1 to 10,000 | 1 to 10,000 | 1 to 10,000 | 1 to 10,000 | 1 to 10,000 | 1 to 10,000 |
| Gain-Bandwidth Product | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Small-Signal Bandwidth | 0.65 MHz | 0.65 MHz | 0.65 MHz | 0.65 MHz | 0.65 MHz | 0.65 MHz |
| Slew Rate | 5 V/µs | 5 V/µs | 5 V/µs | 5 V/µs | 5 V/µs | 5 V/µs |
| Maximum Low Gain Error | 0.02% | 0.02% | 0.02% | 0.02% | 0.02% | 0.02% |
| Maximum Low Gain Temperature Coefficient | 5 ppm/°C | 5 ppm/°C | 5 ppm/°C | 5 ppm/°C | 5 ppm/°C | 5 ppm/°C |
| Maximum Low Nonlinearity | 0.001% | 0.001% | 0.001% | 0.001% | 0.001% | 0.001% |
| Input Noise Density | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz |
মূল পার্থক্যসমূহ
- Broad programmable gain range for precision measurement (বনামAD624)
- Low-noise input suitable for weak differential signals (বনামAD625CDZ)
- High available gain-bandwidth for changing measurement conditions (বনামAD625JN)
- Flexible gain supports multi-range acquisition systems (বনামAD625JNZ)
ডিজাইন নোট
Implement the AD625 gain network with the resistor values specified in the manufacturer gain-setting tables, and connect the gain-setting pins with short, low-loop-area traces. At high gain, resistor tolerance and thermal gradients can materially affect scale accuracy, so use the specified resistor technology and avoid routing sensitive gain nodes beside high-current or switching nodes. Keep the input pair physically close and provide a quiet ground reference to minimize noise pickup and common-mode conversion.
Decouple each supply rail directly at the AD625ADZ with the capacitance and ESR requirements shown in the manufacturer's application guidance. Check supply headroom against the selected gain because a large gain can move the internal operating point close to an input or output limit. Place bypass components near the device pins and keep their ground returns short. Also account for supply ripple and the amplifier's power-supply rejection when the source signal is small.
Verify common-mode input range, output swing, and gain at the worst-case sensor or source condition before finalizing the schematic. The 0.65 MHz small-signal bandwidth and 25 MHz gain-bandwidth product do not remove the need for an input filter appropriate to the source. For bridge sensors, include input-overvoltage protection that does not introduce excessive leakage, and use shielded or guarded routing where EMI could be rectified by the high-impedance input nodes.
Do not select the AD625 solely by its maximum gain of 10,000. Gain error, offset, noise, bandwidth, output swing, and common-mode limits vary across the gain range, and a high gain can reduce usable input headroom. Validate the complete signal chain with the actual gain-setting network and source impedance. Also confirm that the selected ordering variant satisfies the required temperature grade before treating a family member as a drop-in replacement.
কমপ্লায়েন্স তথ্য
The AD625 is an instrumentation amplifier rather than an automotive-qualified device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code in the available product information.