AD7306ARZ - 5V RS-232/RS-422 Transceiver | Analog Devices
MPN: AD7306ARZ ✓ সক্রিয়AD7306ARZ সারাংশ
An RS-232/RS-422 transceiver is a physical-layer interface IC that converts logic-level signals into balanced or unbalanced differential line signals and restores received line signals into TTL-compatible logic levels. In the interface hierarchy, the AD7306ARZ belongs to the transceiver class of interface ICs, combining drivers and receivers in one package. The configurable receiver is especially useful when a system must support more than one serial-interface standard without changing the physical footprint or external circuitry.
The principal device characteristics include a 5 V supply requirement, support for both RS-232 and RS-422 standards, three drivers, three receivers, and a 24-SOIC surface-mount package. According to the Analog Devices AD7306 product page, the receiver intended for RS-232 or RS-422 use is selected by the 232/422 SEL pin. The monolithic construction reduces the number of discrete interface components required for multi-protocol equipment.
Technical implementation requires careful attention to signal termination, grounding, and the difference between unbalanced RS-232 and differential RS-422 operation. The RS-422 driver is intended for balanced signaling, while RS-232 uses an unbalanced interface. The configurable receiver introduces a control decision that must remain consistent with the driver configuration; incorrect SEL polarity or an incorrect board connection can produce invalid receiver output even though the individual circuits are operational.
Typical uses include industrial serial-control equipment, data-acquisition systems, test and measurement instrumentation, and embedded systems that need both legacy RS-232 and RS-422 connectivity. The AD7306ARZ can also bridge a controller's TTL logic to multiple external line-driver channels while accepting return signals from remote equipment. The mixed driver and receiver arrangement is useful in systems where several point-to-point links share a board but require different electrical interfaces.
Designers should use the manufacturer pin-description and connection tables when assigning the 24 SOIC leads, and they should preserve the circuit values and protection strategy shown for the selected RS-232 or RS-422 mode. The exposed device function is line-interface conversion, not protocol conversion; the upper system must still use compatible framing, baud rate, parity, and handshaking rules on both ends of the connection.
This product page combines the device architecture, package information, interface selection considerations, verified sourcing references, and drop-in substitution limits into a concise engineering guide. It also distinguishes genuine same-footprint replacements from broader functional similarities so that PCB changes and protocol mismatches are not overlooked during sourcing or redesign.
এর জন্য ড্রপ-ইন বিকল্প AD7306ARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
AD7306ANZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AD7306AR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AD7306ARZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | RS-232/RS-422 line driver/receiver transceiver |
| সাপ্লাই ভোল্টেজ | 5 V |
| Supported Standards | EIA RS-232 and EIA RS-422 |
| Driver Count | 3 drivers |
| Receiver Count | 3 receivers |
| RS-232 Drivers | 2 dedicated RS-232 drivers |
| RS-422 Drivers | 1 RS-422 driver |
| RS-232 Receivers | 1 dedicated RS-232 receiver |
| Configurable Receiver | 1 receiver configurable as RS-232 or RS-422 |
| Receiver Mode Control | 232/422 SEL pin |
| Logic Interface | TTL signal levels |
| প্যাকেজ | 24-pin SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Packaging | Tube |
| RoHS Compliance | ROHS3 compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited) |
AD7306ARZ 24-pin soic পিন কনফিগারেশন গাইড
AD7306ARZ (24-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD7306ARZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AD7306ARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial-Control Equipment, Data-Acquisition Systems, Test and Measurement Instrumentation, Embedded Serial Communication, Legacy Computer Connectivity, Communications and Networking Equipment.
Industrial Serial-Control Equipment
The AD7306ARZ fits industrial controllers that communicate with external equipment through both RS-232 and RS-422 links. Its 5 V supply operation and three transmitters and three receivers allow the controller to connect several TTL-based serial ports without using separate RS-232 and RS-422 interface packages. The 24-SOIC footprint also keeps the mixed-interface circuitry compact. In an RS-422 channel, the balanced driver supports reliable point-to-point communication over a cable, while RS-232 channels can serve compatible local or legacy equipment. The configurable receiver must be strapped for the selected standard, and the board should preserve the manufacturer-recommended grounding and termination arrangements for each interface type.
সুপারিশকৃত
Data-Acquisition Systems
The AD7306ARZ is appropriate for data-acquisition equipment that must communicate with remote sensors, laboratory instruments, or service computers over RS-232 and RS-422. The three-driver and three-receiver arrangement provides more line-driver resources than a basic one-driver, one-receiver RS-232 transceiver, enabling several command and response paths on one board. The device converts between TTL logic levels and external EIA RS-232 or RS-422 signals, but it does not perform protocol conversion. Baud rate, framing, parity, and command handling must therefore remain coordinated with the connected equipment, while cable length and grounding should follow the selected interface standard.
সুপারিশকৃত
Test and Measurement Instrumentation
The AD7306ARZ can interface TTL-based control logic in test and measurement instruments with legacy RS-232 equipment and balanced RS-422 peripherals. Its dedicated RS-232 and RS-422 transmitters allow both interface standards to coexist on the same instrument, while the configurable receiver supports another receive path that can follow the installed connection scheme. This makes the IC useful where a product family supports instrument accessories with different communication standards. Board-level implementation must include suitable connectors and protection for the external environment, and the 232/422 SEL state should be defined during startup rather than allowed to float.
সুপারিশকৃত
Embedded Serial Communication
The AD7306ARZ suits embedded equipment requiring multiple serial line-driver and receiver resources alongside a microcontroller or programmable logic controller. Its three drivers can address several external links, and its three receivers can return channel status or data from remote devices. The 5 V interface operates directly between TTL-level logic and EIA RS-232 or RS-422 cabling, simplifying system partitioning. Designers should still confirm voltage compatibility at every logic connection, implement the selected standard's termination and grounding rules, and verify the maximum supported data rate and temperature range for the intended equipment.
সুপারিশকৃত
Legacy Computer Connectivity
The AD7306ARZ provides a practical bridge between modern TTL control logic and legacy computer ports using RS-232 while retaining RS-422 capability for longer-distance balanced links. Two dedicated RS-232 drivers support multiple legacy peripherals, and the additional RS-422 driver can serve an instrument or peripheral located farther from the controller. The device does not translate protocols, so software must handle any command or framing differences between the two endpoints. Connector wiring, signal protection, and the logic-level interface remain separate design concerns that should be reviewed against the complete system architecture.
সুপারিশকৃত
Communications and Networking Equipment
The AD7306ARZ is useful in specialized communications equipment that must terminate several serial links using two different electrical standards. RS-422 is suited to balanced point-to-point links, while RS-232 provides compatibility with established single-ended peripherals and management ports. The combination of three drivers, three receivers, and a mode-selectable receiver allows one interface IC to serve a mixed equipment backplane. Designers should treat line termination, cable length, common-mode tolerance, and grounding as mode-dependent requirements, because the same external network should not be copied indiscriminately between RS-232 and RS-422 channels.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD7306ARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | AD7306ANZ | AD7306AR |
|---|---|---|---|
| Package | 24-SOIC | 24-SOIC | 24-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RS-232/RS-422 line driver/receiver | RS-232/RS-422 line driver/receiver | RS-232/RS-422 line driver/receiver |
| Supply Voltage | 5 V | 5 V | 5 V |
| Driver Count | 3 | 3 | 3 |
| Receiver Count | 3 | 3 | 3 |
| Supported Standards | EIA RS-232 and EIA RS-422 | EIA RS-232 and EIA RS-422 | EIA RS-232 and EIA RS-422 |
| Configurable Receiver Control | 232/422 SEL pin | 232/422 SEL pin | 232/422 SEL pin |
মূল পার্থক্যসমূহ
- Combines three drivers and three receivers in one mixed-standard interface (বনামAD7306ANZ)
- Supports two electrical standards in one monolithic package (বনামAD7306AR)
- Provides a receiver that can be configured for either interface standard (বনামAD7306ANZ)
ডিজাইন নোট
Assign the 24-SOIC leads from the manufacturer pin-description table and preserve separation between external line-driver outputs and sensitive TTL-side circuitry. Keep the configurable receiver's 232/422 SEL connection to a defined logic state rather than allowing it to float. The AD7306 supports both unbalanced RS-232 and balanced RS-422 operation, so the grounding and termination network for each mode should follow the application circuit for that specific interface rather than a generic transceiver layout.
Do not treat the AD7306ARZ as a protocol converter. It changes electrical levels between TTL logic and RS-232 or RS-422 lines, but the connected systems must independently agree on baud rate, data bits, parity, stop bits, and command framing. Also verify that each external connector exposes the correct signal pairs for the selected standard; an RS-422 path requires balanced routing, while RS-232 uses an unbalanced signal arrangement.
Design the protection and termination networks for the actual cable environment. External serial connectors can expose the interface to ESD or other transients, so protection components should be placed close to the connector and selected for the relevant line impedance. Keep the protection return paths short and separate from sensitive logic references where practical. Confirm the external network against the Analog Devices typical application circuit before manufacturing.
Provide a stable 5 V supply and follow the manufacturer bypass-capacitor recommendations at the device pins. Because several drivers may switch simultaneously, evaluate the supply network for transient current and ground bounce across all active channels. The available product information identifies a 5 V operating requirement but does not provide a complete supply-current limit, so obtain the detailed electrical tables before finalizing the power budget and capacitor selection.
কমপ্লায়েন্স তথ্য
The product information identifies ROHS3 compliance, REACH unaffected status, and MSL 1 unlimited floor life. Lead-free, halogen-free, conflict-minerals, and automotive qualification status are not established by the available product information.