Analog Devices

AD7306ARZ - 5V RS-232/RS-422 Transceiver | Analog Devices

N.º da peça: AD7306ARZ ✓ Ativo
5 V Vdss EIA RS-232 and EIA RS-422 Rds(on) 24-pin SOIC Package
MOQ: 1 |

AD7306ARZ Visão geral

Analog Devices AD7306ARZ is a 5 V monolithic RS-232 and RS-422 line driver/receiver interface IC in a 24-pin SOIC package. The device provides three transmit paths and three receive paths: two dedicated RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one receiver that can be configured for either RS-232 or RS-422 operation. This mixed-standard architecture lets one transceiver support both EIA RS-232 and EIA RS-422 interfaces.

An RS-232/RS-422 transceiver is a physical-layer interface IC that converts logic-level signals into balanced or unbalanced differential line signals and restores received line signals into TTL-compatible logic levels. In the interface hierarchy, the AD7306ARZ belongs to the transceiver class of interface ICs, combining drivers and receivers in one package. The configurable receiver is especially useful when a system must support more than one serial-interface standard without changing the physical footprint or external circuitry.

The principal device characteristics include a 5 V supply requirement, support for both RS-232 and RS-422 standards, three drivers, three receivers, and a 24-SOIC surface-mount package. According to the Analog Devices AD7306 product page, the receiver intended for RS-232 or RS-422 use is selected by the 232/422 SEL pin. The monolithic construction reduces the number of discrete interface components required for multi-protocol equipment.

Technical implementation requires careful attention to signal termination, grounding, and the difference between unbalanced RS-232 and differential RS-422 operation. The RS-422 driver is intended for balanced signaling, while RS-232 uses an unbalanced interface. The configurable receiver introduces a control decision that must remain consistent with the driver configuration; incorrect SEL polarity or an incorrect board connection can produce invalid receiver output even though the individual circuits are operational.

Typical uses include industrial serial-control equipment, data-acquisition systems, test and measurement instrumentation, and embedded systems that need both legacy RS-232 and RS-422 connectivity. The AD7306ARZ can also bridge a controller's TTL logic to multiple external line-driver channels while accepting return signals from remote equipment. The mixed driver and receiver arrangement is useful in systems where several point-to-point links share a board but require different electrical interfaces.

Designers should use the manufacturer pin-description and connection tables when assigning the 24 SOIC leads, and they should preserve the circuit values and protection strategy shown for the selected RS-232 or RS-422 mode. The exposed device function is line-interface conversion, not protocol conversion; the upper system must still use compatible framing, baud rate, parity, and handshaking rules on both ends of the connection.

This product page combines the device architecture, package information, interface selection considerations, verified sourcing references, and drop-in substitution limits into a concise engineering guide. It also distinguishes genuine same-footprint replacements from broader functional similarities so that PCB changes and protocol mismatches are not overlooked during sourcing or redesign.

Alternativas drop-in para AD7306ARZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

AD7306ANZ

✅ Drop-In
Analog Devices
📦 24-SOIC
5 V · 4.75 V to 5.25 V · 3 channels · 3 channels · 2 channels · 1 channel · 1 channel · 1 channel

Consulte o preço

Ver ficha técnica →

AD7306AR

✅ Drop-In
📦 24-SOIC
Same AD7306 line-driver/receiver family and 24-SOIC package class; the ordering suffix differs, so temperature grade and exact suffix compatibility must be verified.

📋 Alternativa de referência (fora do catálogo)

AD7306ARZ Classificações máximas e características elétricas

Product Type RS-232/RS-422 line driver/receiver transceiver
Tensão de alimentação 5 V
Supported Standards EIA RS-232 and EIA RS-422
Driver Count 3 drivers
Receiver Count 3 receivers
RS-232 Drivers 2 dedicated RS-232 drivers
RS-422 Drivers 1 RS-422 driver
RS-232 Receivers 1 dedicated RS-232 receiver
Configurable Receiver 1 receiver configurable as RS-232 or RS-422
Receiver Mode Control 232/422 SEL pin
Logic Interface TTL signal levels
Encapsulamento 24-pin SOIC
Tipo de montagem Surface mount
Packaging Tube
RoHS Compliance ROHS3 compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1 (unlimited)

Guia de Configuração de Pinos do AD7306ARZ 24-pin soic

Configuração de pinos para AD7306ARZ (pacote 24-pin soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 24-pin soic para AD7306ARZ

Nenhum dado detalhado de pinagem disponível para AD7306ARZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD7306ARZ é adequado para 6 aplicaçãos: Industrial Serial-Control Equipment, Data-Acquisition Systems, Test and Measurement Instrumentation, Embedded Serial Communication, Legacy Computer Connectivity, Communications and Networking Equipment.

🏭

Industrial Serial-Control Equipment

The AD7306ARZ fits industrial controllers that communicate with external equipment through both RS-232 and RS-422 links. Its 5 V supply operation and three transmitters and three receivers allow the controller to connect several TTL-based serial ports without using separate RS-232 and RS-422 interface packages. The 24-SOIC footprint also keeps the mixed-interface circuitry compact. In an RS-422 channel, the balanced driver supports reliable point-to-point communication over a cable, while RS-232 channels can serve compatible local or legacy equipment. The configurable receiver must be strapped for the selected standard, and the board should preserve the manufacturer-recommended grounding and termination arrangements for each interface type.

📊

Data-Acquisition Systems

The AD7306ARZ is appropriate for data-acquisition equipment that must communicate with remote sensors, laboratory instruments, or service computers over RS-232 and RS-422. The three-driver and three-receiver arrangement provides more line-driver resources than a basic one-driver, one-receiver RS-232 transceiver, enabling several command and response paths on one board. The device converts between TTL logic levels and external EIA RS-232 or RS-422 signals, but it does not perform protocol conversion. Baud rate, framing, parity, and command handling must therefore remain coordinated with the connected equipment, while cable length and grounding should follow the selected interface standard.

🖥️

Test and Measurement Instrumentation

The AD7306ARZ can interface TTL-based control logic in test and measurement instruments with legacy RS-232 equipment and balanced RS-422 peripherals. Its dedicated RS-232 and RS-422 transmitters allow both interface standards to coexist on the same instrument, while the configurable receiver supports another receive path that can follow the installed connection scheme. This makes the IC useful where a product family supports instrument accessories with different communication standards. Board-level implementation must include suitable connectors and protection for the external environment, and the 232/422 SEL state should be defined during startup rather than allowed to float.

🔧

Embedded Serial Communication

The AD7306ARZ suits embedded equipment requiring multiple serial line-driver and receiver resources alongside a microcontroller or programmable logic controller. Its three drivers can address several external links, and its three receivers can return channel status or data from remote devices. The 5 V interface operates directly between TTL-level logic and EIA RS-232 or RS-422 cabling, simplifying system partitioning. Designers should still confirm voltage compatibility at every logic connection, implement the selected standard's termination and grounding rules, and verify the maximum supported data rate and temperature range for the intended equipment.

💻

Legacy Computer Connectivity

The AD7306ARZ provides a practical bridge between modern TTL control logic and legacy computer ports using RS-232 while retaining RS-422 capability for longer-distance balanced links. Two dedicated RS-232 drivers support multiple legacy peripherals, and the additional RS-422 driver can serve an instrument or peripheral located farther from the controller. The device does not translate protocols, so software must handle any command or framing differences between the two endpoints. Connector wiring, signal protection, and the logic-level interface remain separate design concerns that should be reviewed against the complete system architecture.

🌐

Communications and Networking Equipment

The AD7306ARZ is useful in specialized communications equipment that must terminate several serial links using two different electrical standards. RS-422 is suited to balanced point-to-point links, while RS-232 provides compatibility with established single-ended peripherals and management ports. The combination of three drivers, three receivers, and a mode-selectable receiver allows one interface IC to serve a mixed equipment backplane. Designers should treat line termination, cable length, common-mode tolerance, and grounding as mode-dependent requirements, because the same external network should not be copied indiscriminately between RS-232 and RS-422 channels.

What is the AD7306ARZ?
The AD7306ARZ is a 5 V monolithic interface IC that combines three transmitters and three receivers for EIA RS-232 and EIA RS-422 serial communication. According to the Analog Devices AD7306 product page, it contains two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one receiver configurable as either RS-232 or RS-422 through the 232/422 SEL pin. The device is packaged in a 24-pin SOIC.
How many drivers and receivers are in the AD7306ARZ?
The AD7306ARZ contains three drivers and three receivers. Its transmit section consists of two dedicated RS-232 drivers and one RS-422 driver, while its receive section consists of one dedicated RS-232 receiver and one receiver that can operate as RS-232 or RS-422. This arrangement allows a single 24-SOIC package to support both serial-interface standards.
Where can I download the AD7306ARZ datasheet PDF?
The official AD7306ARZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD7306.pdf. The manufacturer product page at https://www.analog.com/en/products/ad7306.html provides the device description and product information. Use the pin-description and typical application sections when assigning the 24-SOIC leads and selecting external network components.
Where can I find the AD7306ARZ pinout?
Use the pin-description table and connection diagram in the official Analog Devices AD7306 datasheet to locate the AD7306ARZ pinout. The AD7306ARZ uses a 24-pin SOIC package, but the public product description does not provide a complete numbered lead list. Use the manufacturer table when assigning power, ground, driver outputs, receiver inputs, TTL logic signals, and the 232/422 SEL control pin.
How does the 232/422 SEL pin configure the AD7306ARZ receiver?
The 232/422 SEL pin selects whether the configurable receiver operates in RS-232 or RS-422 mode. According to the Analog Devices AD7306 datasheet, one receiver path can be configured for either standard, allowing the board to support both EIA RS-232 and EIA RS-422 interfaces. The selected mode must agree with the driver, receiver input, and external termination arrangement.
What is the difference between RS-232 and RS-422 in the AD7306ARZ?
RS-232 is an unbalanced serial interface, while RS-422 uses a balanced differential signal pair. The AD7306ARZ includes two dedicated RS-232 drivers, one RS-422 driver, and a configurable receiver, so the physical interface can accommodate both standards. The wiring, grounding, and termination requirements must match the selected mode rather than being copied from an RS-232 design without review.
Where can I buy AD7306ARZ and check its current availability?
Use the Request a Quote form on this page to request the current AD7306ARZ availability, minimum order quantity, lead time, and commercial terms. The AD7306ARZ is listed as an Analog Devices 24-SOIC RS-232/RS-422 transceiver. For production planning, obtain the exact AD7306ARZ suffix and package information in the quotation response before releasing components to assembly.
What is the current price of the AD7306ARZ?
Current commercial pricing for the AD7306ARZ should be requested through the Request a Quote form on this page. The structured offer is refreshed against current sourcing conditions rather than exposing a stale catalog amount in technical guidance. The quote should confirm the AD7306ARZ manufacturer part number, 24-SOIC package, quantity break, delivery schedule, and authorized-channel provenance.
What is the lead time for AD7306ARZ?
Request the current AD7306ARZ lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package form, and available manufacturer or authorized-channel inventory. A complete sourcing response should state the confirmed quantity, standard tube packaging, shipment location, and expected delivery date so production planning can use an actual commitment.
Is the AD7306ARZ in stock?
Current AD7306ARZ stock status should be confirmed through the Request a Quote form on this page. The form provides a direct path for checking available quantity and delivery timing for the exact 24-SOIC part. Do not treat general catalog visibility as a stock guarantee, particularly when a production build requires a specific quantity and schedule.
What is the best drop-in replacement for the AD7306ARZ?
The AD7306ARZ has a limited pool of verified same-footprint replacements because its mixed RS-232/RS-422 driver and receiver arrangement is specialized. The AD7306ANZ is a closely related same-family device identified in comparison listings, but package suffix, temperature grade, and pin compatibility should be checked against the manufacturer documentation before substitution. Use the Request a Quote form if no qualified drop-in is available for the required production conditions.
Can the AD7306ANZ replace the AD7306ARZ?
The AD7306ANZ is the closest same-family candidate identified for the AD7306ARZ, but replacement approval depends on its exact package suffix, temperature grade, and pin-level configuration. The available comparison information establishes product-family equivalence rather than a universal drop-in guarantee. Review the Analog Devices ordering guide, datasheet, and pin tables before substituting it into an existing 24-SOIC layout.
AD7306ARZ vs AD7306AR - which part should be selected?
AD7306ARZ and AD7306AR identify closely related AD7306 orderable versions, and the available comparison listing places them in the same RS-232/RS-422 transceiver family. The decision should not be based on the suffix alone: confirm package, operating-temperature grade, and the exact manufacturer ordering information. AD7306ARZ is the target orderable designation and should be quoted by its complete MPN to avoid unintended substitution.
When should I choose the AD7306ARZ instead of a dedicated RS-232 transceiver?
Choose the AD7306ARZ when one board must combine RS-232 and RS-422 interface capability and benefit from three drivers and three receivers in one package. A dedicated RS-232 transceiver may be simpler when every link uses only RS-232. The AD7306ARZ is preferable for mixed-standard equipment because its configurable receiver and dedicated RS-422 driver reduce the number of separate interface devices, although each mode still requires correct board-level implementation.
Is the AD7306ARZ suitable for industrial serial-control equipment?
The AD7306ARZ is suitable for serial-control equipment that needs 5 V TTL logic interfacing to both EIA RS-232 and EIA RS-422. Its three transmitters and three receivers allow several external links to be supported in a compact 24-SOIC footprint. Confirm the required operating-temperature range, data rate, protection level, and connector-level ESD requirements before using it in a deployed industrial product.
What are the key specifications of AD7306ARZ that engineers should know?
The key AD7306ARZ specifications are a 5 V supply, three transmit channels, three receive channels, support for EIA RS-232 and EIA RS-422, one configurable receiver controlled by 232/422 SEL, and a 24-pin SOIC package. The device also provides two dedicated RS-232 drivers, one RS-422 driver, and one dedicated RS-232 receiver. These details define its mixed-protocol line-interface role and footprint.
What can replace the AD7306ARZ?
The AD7306ANZ is the leading same-family replacement candidate identified for the AD7306ARZ, while no verified cross-brand pin-to-pin equivalent was established. Because the AD7306 has a distinctive combination of two RS-232 drivers, one RS-422 driver, two dedicated receivers, and one configurable receiver, a generic RS-232 transceiver may not preserve the complete function. Validate the ordering suffix, pinout, temperature grade, and application circuit before replacement.
Is there a Texas Instruments equivalent for the AD7306ARZ?
No verified Texas Instruments cross-brand equivalent for the AD7306ARZ was established from the available sourcing information. A part sharing the 24-SOIC footprint is not automatically interchangeable because the AD7306 combines three drivers, three receivers, RS-232, RS-422, and a mode-selectable receiver in one device. Request a second-source review using the complete electrical and pin requirements before committing to a cross-brand substitution.

Dados de referência de engenharia para AD7306ARZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD7306ARZ when an equipment design needs one 5 V package to provide both RS-232 and RS-422 connectivity, two dedicated RS-232 transmit paths, one RS-422 transmit path, and three receive resources. It is particularly useful in industrial controllers, data-acquisition equipment, and test instruments that must support mixed legacy and balanced serial peripherals. Select AD7306ANZ when its ordering suffix and environmental grade are confirmed to satisfy the design and the existing 24-SOIC layout is accepted for substitution. Select AD7306AR only after checking its exact suffix, temperature grade, and pin configuration against the AD7306ARZ requirements. Do not substitute a generic RS-232 transceiver when the board relies on the RS-422 driver or the configurable receiver, because a matching package alone does not preserve the complete mixed-interface function. Before release, verify supply voltage, operating-temperature limits, maximum data rate, external termination, and protection requirements from the complete manufacturer documentation.

Comparação com alternativas

Parâmetro Este produto AD7306ANZ AD7306AR
Package 24-SOIC 24-SOIC 24-SOIC
Brand Analog Devices Analog Devices Analog Devices
Product Type RS-232/RS-422 line driver/receiver RS-232/RS-422 line driver/receiver RS-232/RS-422 line driver/receiver
Supply Voltage 5 V 5 V 5 V
Driver Count 3 3 3
Receiver Count 3 3 3
Supported Standards EIA RS-232 and EIA RS-422 EIA RS-232 and EIA RS-422 EIA RS-232 and EIA RS-422
Configurable Receiver Control 232/422 SEL pin 232/422 SEL pin 232/422 SEL pin

Principais diferenciais

  • Combines three drivers and three receivers in one mixed-standard interface (vs AD7306ANZ)
  • Supports two electrical standards in one monolithic package (vs AD7306AR)
  • Provides a receiver that can be configured for either interface standard (vs AD7306ANZ)

Notas de projeto

Assign the 24-SOIC leads from the manufacturer pin-description table and preserve separation between external line-driver outputs and sensitive TTL-side circuitry. Keep the configurable receiver's 232/422 SEL connection to a defined logic state rather than allowing it to float. The AD7306 supports both unbalanced RS-232 and balanced RS-422 operation, so the grounding and termination network for each mode should follow the application circuit for that specific interface rather than a generic transceiver layout.

Do not treat the AD7306ARZ as a protocol converter. It changes electrical levels between TTL logic and RS-232 or RS-422 lines, but the connected systems must independently agree on baud rate, data bits, parity, stop bits, and command framing. Also verify that each external connector exposes the correct signal pairs for the selected standard; an RS-422 path requires balanced routing, while RS-232 uses an unbalanced signal arrangement.

Design the protection and termination networks for the actual cable environment. External serial connectors can expose the interface to ESD or other transients, so protection components should be placed close to the connector and selected for the relevant line impedance. Keep the protection return paths short and separate from sensitive logic references where practical. Confirm the external network against the Analog Devices typical application circuit before manufacturing.

Provide a stable 5 V supply and follow the manufacturer bypass-capacitor recommendations at the device pins. Because several drivers may switch simultaneously, evaluate the supply network for transient current and ground bounce across all active channels. The available product information identifies a 5 V operating requirement but does not provide a complete supply-current limit, so obtain the detailed electrical tables before finalizing the power budget and capacitor selection.

Informações de conformidade

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product information identifies ROHS3 compliance, REACH unaffected status, and MSL 1 unlimited floor life. Lead-free, halogen-free, conflict-minerals, and automotive qualification status are not established by the available product information.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD7306ARZ datasheet AD7306ARZ datasheet pdf AD7306ARZ pinout AD7306ARZ specifications AD7306ARZ 24-SOIC Analog Devices AD7306ARZ AD7306ARZ RS-232 RS-422 transceiver AD7306ARZ replacement AD7306ARZ equivalent AD7306ARZ vs AD7306ANZ AD7306ARZ price AD7306ARZ stock AD7306 application circuit AD7306ARZ industrial serial interface

Componentes & termos relacionados

Analog Devices AD7306ARZ AD7306ANZ AD7306AR RS-232 transceiver RS-422 transceiver line driver/receiver interface IC TTL logic EIA RS-232 EIA RS-422 232/422 SEL pin 24-pin SOIC SOIC package family surface-mount package RoHS ROHS3 REACH MSL 1 industrial control equipment data acquisition test and measurement serial communication balanced differential signaling unbalanced signaling
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ