AD7441BRM - 10-Bit 1 MSPS SAR ADC | Analog Devices
MPN: AD7441BRM ✗ জীবনকালের সমাপ্তিAD7441BRM সারাংশ
A successive-approximation register ADC is a sampling data-converter architecture that determines each output code by comparing the sampled input against an internal DAC. The AD7441 combines this architecture with low power consumption, a 10-bit conversion rate of 1 MSPS, and a pseudo-differential input structure in a compact 8-pin surface-mount package. It belongs to the ADC and data-converter hierarchy within the broader semiconductor and signal-processing market.
Key features include a 10-bit conversion resolution, a maximum conversion rate of 1 MSPS, single-supply operation, an external reference input, and a serial data interface. The pseudo-differential input accepts a single-ended signal referenced to ground while providing a balanced internal sampling arrangement that can simplify analog front-end design. The external reference allows the converter performance to be scaled against the available voltage range of the surrounding circuit.
The AD7441 uses a successive-approximation conversion process controlled by an external serial clock. An active-low chip-select signal initiates and frames the serial transfer, allowing the converter to share a data bus with other peripherals. Its interface is suitable for microcontroller, DSP, and industrial acquisition systems that require moderate resolution, compact footprint, and straightforward serial connectivity.
Typical uses include industrial process monitoring, sensor signal acquisition, battery-powered measurement instruments, portable data loggers, and embedded control systems. The 1 MSPS throughput is appropriate for many slow-to-medium-rate analog signals, while the 10-bit resolution is generally sufficient for position, level, and process-variable measurements.
When laying out the circuit, place the input, reference, and decoupling connections directly beside their associated pins and keep the serial clock trace short. The voltage applied to the reference input must remain within the permitted range, and the analog signal must not exceed the input limits of the selected supply voltage. Confirm startup timing and data-capture latency against the host controller clocking scheme.
This page combines the manufacturer product information with practical interface guidance, orderable-part comparisons, and design notes for engineers evaluating the AD7441 in compact analog acquisition systems.
এর জন্য ড্রপ-ইন বিকল্প AD7441BRM — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
AD7441BRMZ
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AD7441BRM-REEL7
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AD7441BRM সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| রেজোলিউশন | 10 bit |
| Conversion Rate | 1 MSPS |
| Architecture | Successive approximation (SAR) |
| Number of Channels | 1 |
| Input Type | Pseudo-differential analog input |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Power Supply Type | Single supply |
| Reference Voltage Range | 100 mV to VDD |
| Reference Type | External |
| Output Interface | Serial |
| Interface Control | External serial clock and active-low chip select |
| Power Consumption | Low power |
| প্যাকেজ | 8-pin MSOP |
| মাউন্টিং টাইপ | Surface mount |
AD7441BRM 8-pin msop পিন কনফিগারেশন গাইড
AD7441BRM (8-pin msop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD7441BRM.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AD7441BRM এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Monitoring, Sensor Signal Acquisition, Battery-Powered Measurement Instruments, Microcontroller Data Acquisition, Embedded Level and Position Measurement, Compact Data Logging and Condition Monitoring.
Industrial Process Monitoring
The AD7441BRM suits industrial process-monitoring channels that must digitize slow-to-medium-rate sensor voltages. Its 10-bit resolution and 1 MSPS conversion rate provide a practical balance between measurement fidelity and system throughput, while the pseudo-differential input simplifies the connection of transducers referenced to ground. Place the converter close to the conditioned sensor output to minimize pickup on the analog trace, and use a clean external reference because reference error appears directly in the converted code. The serial clock and active-low chip-select signals connect readily to a microcontroller or industrial controller.
সুপারিশকৃত
Sensor Signal Acquisition
The AD7441BRM is appropriate for converting analog sensor outputs when 10-bit resolution and a maximum rate of 1 MSPS are sufficient. Its pseudo-differential input accepts a ground-referenced sensor signal, reducing the need for a second physical input channel while retaining a balanced internal sampling structure. An externally applied reference from 100 mV to VDD allows the analog span to be matched to the transducer output. Use local supply decoupling at the 2.7 V to 5.25 V power pins and route the serial data away from high-current switching nodes to preserve code stability.
সুপারিশকৃত
Battery-Powered Measurement Instruments
The AD7441BRM fits portable measurement equipment where a compact 8-pin MSOP package, single-supply operation, and low-power SAR conversion are valuable. Operation from 2.7 V to 5.25 V permits use with rechargeable-cell or regulated 3.3 V rails, and the 10-bit result format keeps host-controller processing straightforward. The external reference must be selected with attention to current consumption because it powers the conversion reference path. Switching the converter off between measurements, when the host interface permits, can further reduce system energy use and extend battery operating time.
সুপারিশকৃত
Microcontroller Data Acquisition
The AD7441BRM interfaces conveniently with a host microcontroller through its serial clock, chip-select, and serial-data connections. The controller can initiate a conversion and shift the 10-bit result into its receive register without requiring a wide parallel data bus. This makes the converter useful in compact control boards with limited connector and routing space. The host timing should follow the manufacturer acquisition cycle, and the inactive states of clock and chip select should be driven to valid logic levels. Keeping these traces short reduces susceptibility to interference from display, motor, or power-converter circuitry.
সুপারিশকৃত
Embedded Level and Position Measurement
The AD7441BRM can digitize potentiometer positions, liquid-level signals, and other bounded analog quantities where 10-bit resolution provides approximately 1024 output codes. At 1 MSPS, the converter completes an acquisition much faster than most level or position sensors update, allowing the host to sample repeatedly and apply averaging or filtering. A stable external reference and careful grounding are important because both influence the interpreted code value. Use the pseudo-differential input arrangement with a properly conditioned source and verify the input range against the selected supply voltage before scaling the sensor output.
সুপারিশকৃত
Compact Data Logging and Condition Monitoring
The AD7441BRM supports compact data loggers that record temperature, pressure, vibration proxies, and other conditioned analog channels. The 1 MSPS maximum rate allows burst sampling, while the 10-bit serial result format reduces the storage and processing burden on a small microcontroller. Because the converter is listed as obsolete, maintenance programs can use the orderable AD7441BRMZ and AD7441BRM-REEL7 configurations when their packaging matches the production method. For new registrations, evaluate current Analog Devices converters alongside long-term availability requirements.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD7441BRM — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | AD7441BRMZ | AD7441BRM-REEL7 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin MSOP | 8-pin MSOP - same footprint | 8-pin MSOP - same footprint |
| Resolution | 10 bit | 10 bit | 10 bit |
| Conversion Rate | 1 MSPS | 1 MSPS | 1 MSPS |
| Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) |
| Input Type | Pseudo-differential analog input | Pseudo-differential analog input | Pseudo-differential analog input |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Interface | Serial clock, active-low chip select, and serial data | Serial clock, active-low chip select, and serial data | Serial clock, active-low chip select, and serial data |
| Reference Voltage | External, 100 mV to VDD | External, 100 mV to VDD | External, 100 mV to VDD |
| Orderable Packaging | Tube | Tape and reel orderable code | Reel orderable code |
মূল পার্থক্যসমূহ
- Direct orderable coverage of the original AD7441 configuration (বনামAD7441BRMZ)
- Reel-oriented procurement option for automated assembly (বনামAD7441BRM-REEL7)
- Compact serial-interface integration (বনামAD7441BRMZ)
- Single-supply operation across common embedded rails (বনামAD7441BRM-REEL7)
ডিজাইন নোট
Route the analog input and external reference directly to their associated pins, with no unnecessary stubs or shared high-current paths. Place the input and reference bypass or decoupling components close to the converter rather than at a distant connector. A compact analog island helps reduce differences in pickup between the input and reference networks, which is especially important when the converted signal is used for threshold decisions.
Keep the serial clock, chip-select, and serial-data traces short and drive them from the host controller with controlled edge rates. Avoid routing these signals alongside switching-node or high-current inductive traces. Confirm that the controller presents valid logic levels during idle periods and follows the acquisition and transfer timing in the manufacturer datasheet before enabling the interface.
Do not assume that the pseudo-differential input accepts arbitrary bipolar voltages. The input must remain within the limits associated with the selected 2.7 V to 5.25 V supply, and the external reference must remain between 100 mV and VDD. Also verify the package orientation and pin-one marking before assembly because the orderable codes use the same 8-pin MSOP footprint but different packaging arrangements.
Decouple the analog supply pin at the package with a low-inductance capacitor and follow the manufacturer layout recommendations for additional bulk and high-frequency capacitance. Treat the external reference as a precision analog node because its magnitude sets the conversion scale and its noise or drift becomes correlated measurement error. Power down the converter when the host system permits if the application targets minimum standby consumption.
কমপ্লায়েন্স তথ্য
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the AD7441BRM. The converter is an analog signal-processing IC rather than an automotive-qualified device.