Analog Devices

AD7441BRM - 10-Bit 1 MSPS SAR ADC | Analog Devices

MPN: AD7441BRM ✗ پایان تولید
2.7 V to 5.25 V Vdss 8-pin MSOP Package
حداقل سفارش: 1 |

AD7441BRM نمای کلی

The Analog Devices AD7441BRM is a 10-bit, 1 MSPS successive-approximation analog-to-digital converter with a pseudo-differential analog input, housed in an 8-pin MSOP package. It operates from a single 2.7 V to 5.25 V supply and accepts an externally applied reference voltage ranging from 100 mV to the supply voltage. Serial conversion data is clocked into a microprocessor or DSP through the serial clock input and active-low chip-select interface.

A successive-approximation register ADC is a sampling data-converter architecture that determines each output code by comparing the sampled input against an internal DAC. The AD7441 combines this architecture with low power consumption, a 10-bit conversion rate of 1 MSPS, and a pseudo-differential input structure in a compact 8-pin surface-mount package. It belongs to the ADC and data-converter hierarchy within the broader semiconductor and signal-processing market.

Key features include a 10-bit conversion resolution, a maximum conversion rate of 1 MSPS, single-supply operation, an external reference input, and a serial data interface. The pseudo-differential input accepts a single-ended signal referenced to ground while providing a balanced internal sampling arrangement that can simplify analog front-end design. The external reference allows the converter performance to be scaled against the available voltage range of the surrounding circuit.

The AD7441 uses a successive-approximation conversion process controlled by an external serial clock. An active-low chip-select signal initiates and frames the serial transfer, allowing the converter to share a data bus with other peripherals. Its interface is suitable for microcontroller, DSP, and industrial acquisition systems that require moderate resolution, compact footprint, and straightforward serial connectivity.

Typical uses include industrial process monitoring, sensor signal acquisition, battery-powered measurement instruments, portable data loggers, and embedded control systems. The 1 MSPS throughput is appropriate for many slow-to-medium-rate analog signals, while the 10-bit resolution is generally sufficient for position, level, and process-variable measurements.

When laying out the circuit, place the input, reference, and decoupling connections directly beside their associated pins and keep the serial clock trace short. The voltage applied to the reference input must remain within the permitted range, and the analog signal must not exceed the input limits of the selected supply voltage. Confirm startup timing and data-capture latency against the host controller clocking scheme.

This page combines the manufacturer product information with practical interface guidance, orderable-part comparisons, and design notes for engineers evaluating the AD7441 in compact analog acquisition systems.

جایگزین‌های drop-in برای AD7441BRM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AD7441BRMZ

✅ جایگزین مستقیم
📦 8-pin MSOP
Same 10-bit, 1 MSPS SAR converter and 8-pin MSOP terminal arrangement; orderable packaging code differs, with no specified change to conversion performance.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD7441BRM-REEL7

✅ جایگزین مستقیم
📦 8-pin MSOP
Same 10-bit, 1 MSPS SAR converter and 8-pin MSOP terminal arrangement; reel ordering code differs, with no specified change to conversion performance.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD7441BRM حداکثر مقادیر مجاز و مشخصات الکتریکی

رزولوشن 10 bit
Conversion Rate 1 MSPS
Architecture Successive approximation (SAR)
Number of Channels 1
Input Type Pseudo-differential analog input
Supply Voltage Range 2.7 V to 5.25 V
Power Supply Type Single supply
Reference Voltage Range 100 mV to VDD
Reference Type External
Output Interface Serial
Interface Control External serial clock and active-low chip select
Power Consumption Low power
بسته‌بندی 8-pin MSOP
نوع نصب Surface mount

راهنمای پیکربندی پین AD7441BRM 8-pin msop

پیکربندی پین برای AD7441BRM (پکیج 8-pin msop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin msop برای AD7441BRM

داده پین‌آوت تفصیلی موجود نیست برای AD7441BRM.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD7441BRM مناسب است برای 6 کاربردs: Industrial Process Monitoring, Sensor Signal Acquisition, Battery-Powered Measurement Instruments, Microcontroller Data Acquisition, Embedded Level and Position Measurement, Compact Data Logging and Condition Monitoring.

🏭

Industrial Process Monitoring

The AD7441BRM suits industrial process-monitoring channels that must digitize slow-to-medium-rate sensor voltages. Its 10-bit resolution and 1 MSPS conversion rate provide a practical balance between measurement fidelity and system throughput, while the pseudo-differential input simplifies the connection of transducers referenced to ground. Place the converter close to the conditioned sensor output to minimize pickup on the analog trace, and use a clean external reference because reference error appears directly in the converted code. The serial clock and active-low chip-select signals connect readily to a microcontroller or industrial controller.

🧩

Sensor Signal Acquisition

The AD7441BRM is appropriate for converting analog sensor outputs when 10-bit resolution and a maximum rate of 1 MSPS are sufficient. Its pseudo-differential input accepts a ground-referenced sensor signal, reducing the need for a second physical input channel while retaining a balanced internal sampling structure. An externally applied reference from 100 mV to VDD allows the analog span to be matched to the transducer output. Use local supply decoupling at the 2.7 V to 5.25 V power pins and route the serial data away from high-current switching nodes to preserve code stability.

📱

Battery-Powered Measurement Instruments

The AD7441BRM fits portable measurement equipment where a compact 8-pin MSOP package, single-supply operation, and low-power SAR conversion are valuable. Operation from 2.7 V to 5.25 V permits use with rechargeable-cell or regulated 3.3 V rails, and the 10-bit result format keeps host-controller processing straightforward. The external reference must be selected with attention to current consumption because it powers the conversion reference path. Switching the converter off between measurements, when the host interface permits, can further reduce system energy use and extend battery operating time.

🔧

Microcontroller Data Acquisition

The AD7441BRM interfaces conveniently with a host microcontroller through its serial clock, chip-select, and serial-data connections. The controller can initiate a conversion and shift the 10-bit result into its receive register without requiring a wide parallel data bus. This makes the converter useful in compact control boards with limited connector and routing space. The host timing should follow the manufacturer acquisition cycle, and the inactive states of clock and chip select should be driven to valid logic levels. Keeping these traces short reduces susceptibility to interference from display, motor, or power-converter circuitry.

📊

Embedded Level and Position Measurement

The AD7441BRM can digitize potentiometer positions, liquid-level signals, and other bounded analog quantities where 10-bit resolution provides approximately 1024 output codes. At 1 MSPS, the converter completes an acquisition much faster than most level or position sensors update, allowing the host to sample repeatedly and apply averaging or filtering. A stable external reference and careful grounding are important because both influence the interpreted code value. Use the pseudo-differential input arrangement with a properly conditioned source and verify the input range against the selected supply voltage before scaling the sensor output.

🖥️

Compact Data Logging and Condition Monitoring

The AD7441BRM supports compact data loggers that record temperature, pressure, vibration proxies, and other conditioned analog channels. The 1 MSPS maximum rate allows burst sampling, while the 10-bit serial result format reduces the storage and processing burden on a small microcontroller. Because the converter is listed as obsolete, maintenance programs can use the orderable AD7441BRMZ and AD7441BRM-REEL7 configurations when their packaging matches the production method. For new registrations, evaluate current Analog Devices converters alongside long-term availability requirements.

خلاصه محصولات پیشنهادی

AD7441BRMZ Same-function orderable packaging variant استفاده‌شده در: Industrial Process Monitoring, Sensor Signal Acquisition, Battery-Powered Measurement Instruments, Microcontroller Data Acquisition, Embedded Level and Position Measurement, Compact Data Logging and Condition Monitoring AD7441BRM-REEL7 Same-function orderable packaging variant استفاده‌شده در: Industrial Process Monitoring, Sensor Signal Acquisition, Battery-Powered Measurement Instruments, Microcontroller Data Acquisition, Embedded Level and Position Measurement, Compact Data Logging and Condition Monitoring
What is the AD7441BRM?
The AD7441BRM is a 10-bit, 1 MSPS successive-approximation analog-to-digital converter from Analog Devices. It uses a pseudo-differential analog input, operates from a single 2.7 V to 5.25 V supply, and provides serial output through an external clock and chip-select interface. The manufacturer product page identifies the AD7441 as a high-speed, low-power SAR converter intended for microprocessor and DSP data acquisition.
What is the resolution and sampling rate of AD7441BRM?
The AD7441BRM converts at 1 MSPS with 10-bit output resolution. Its successive-approximation architecture performs one conversion per microsecond at the maximum rate, making it suitable for sensors and process signals that do not require high-frequency waveform capture. The AD7441 product information describes the device as a high-speed, low-power, single-supply SAR analog-to-digital converter.
What is the supply voltage range of AD7441BRM?
The AD7441BRM operates from a single supply of 2.7 V to 5.25 V. This range allows the converter to operate from 3.3 V or 5 V systems without requiring split positive and negative rails. The signal and reference voltages must be evaluated against the selected supply, because the permitted reference range extends from 100 mV to VDD according to the manufacturer product information.
How is the analog input configured on AD7441BRM?
The AD7441BRM has one pseudo-differential analog input. A pseudo-differential converter uses a single-ended external signal while sampling it against an internally referenced arrangement, which simplifies connection to sensors and transducers that produce a ground-referenced voltage. The manufacturer describes the AD7441 as a single-channel SAR converter with a pseudo-differential input.
How does the AD7441BRM serial interface work?
The AD7441BRM transfers conversion results through a serial data interface controlled by an external serial clock and active-low chip-select signal. The host controller clocks the result data out after asserting chip select, and this arrangement allows the ADC to connect to a microprocessor, DSP, or other serial master. Exact timing and data format should be taken from the manufacturer datasheet.
What reference voltage does AD7441BRM use?
The AD7441BRM accepts an external reference voltage rather than using an internal reference. The manufacturer states that the reference input can range from 100 mV to VDD, depending on the power supply and application. Because the reference determines the conversion scale, its stability and tolerance directly influence the accuracy of the resulting digital codes.
Where can I download the AD7441BRM datasheet PDF?
The official AD7441 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/ad7441.html. That page provides the manufacturer documentation for the AD7441 family, including electrical characteristics, pin descriptions, and application details. Use the pin-description table and timing diagrams there when assigning PCB tracks or writing the host interface.
Where can I find the AD7441BRM pinout?
The AD7441BRM pinout is shown in the manufacturer datasheet for the 8-pin MSOP package, with the pin-description table and package drawing defining each terminal. The device uses an 8-pin MSOP package and provides power, analog input, reference, ground, clock, chip-select, and serial-data connections. Assign PCB nets from the datasheet drawing rather than relying on a third-party image.
Is AD7441BRM still active?
The AD7441BRM is listed as obsolete, so it should not be treated as a current production choice for new designs without qualification. Engineers can still use it for maintenance, repair, and previously designed equipment when an exact functional match is required. For new programs, review current Analog Devices converters for lifecycle status and any required design changes.
Where can I buy AD7441BRM online?
You can request AD7441BRM availability and a current quotation through the Request a Quote form on this page. Because the part is listed as obsolete, inventory and sourcing conditions can vary by region and lot. Provide the required quantity, package form, and target delivery date so the order can be checked against available channels.
What is the price of AD7441BRM?
Current commercial terms for the AD7441BRM are provided through the Request a Quote form on this page. The displayed listing references a starting unit price of $4.1464, but that figure is not treated as a guaranteed quotation for every quantity or order configuration. Submit the required quantity and delivery details to obtain pricing that matches the actual request.
What is the lead time for AD7441BRM?
The current lead time for AD7441BRM should be confirmed through the Request a Quote form on this page. Since the device is listed as obsolete, availability may depend on remaining manufacturer or channel inventory rather than a standard production schedule. Include your required quantity, date code needs, and approved source requirements when requesting a quotation.
Is AD7441BRM available in stock?
AD7441BRM availability is checked when you submit a request through the Request a Quote form on this page. A current listing references in-stock inventory, but stock levels for obsolete components can change quickly and may be limited by lot or packaging. Use the form for a transaction-ready response rather than relying on a static availability indication.
What is the best drop-in replacement for AD7441BRM?
The closest orderable options are AD7441BRMZ and AD7441BRM-REEL7, which retain the same AD7441 function and terminal arrangement while changing the orderable packaging format. The manufacturer identifies the AD7441 as obsolete, so confirm both lifecycle status and pin compatibility before substituting either part. PCB footprint, supply voltage, reference range, and serial timing must match the original design.
Can AD7441BRMZ replace AD7441BRM?
Yes, AD7441BRMZ can be used as a same-footprint alternative when the required orderable packaging form matches. Its main performance parameters and terminal arrangement are consistent with the AD7441BRM, and the manufacturer product family remains 10-bit, 1 MSPS, and pseudo-differential. Verify the package orientation, tape-and-reel handling requirements, and current lifecycle status before committing the change.
What can replace AD7441BRM in a data acquisition circuit?
AD7441BRMZ and AD7441BRM-REEL7 are the most direct replacements identified for the AD7441BRM because they preserve the 10-bit, 1 MSPS SAR function and use the same 8-pin MSOP terminal arrangement. Select the version that matches your assembly method, then recheck supply voltage, external reference voltage, serial timing, and acquisition latency against the original schematic.

داده‌های مرجع مهندسی برای AD7441BRM — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AD7441BRM when maintaining an existing design that uses the original 8-pin MSOP device and requires its 10-bit, 1 MSPS pseudo-differential SAR conversion behavior. Choose AD7441BRMZ when the assembly process uses the tape-and-reel orderable configuration; the footprint, electrical function, and terminal arrangement remain the same. Choose AD7441BRM-REEL7 when that specific reel orderable code matches the procurement and assembly process. Neither alternative requires a layout or interface redesign when the footprint, supply voltage, reference arrangement, and serial timing are identical. For new designs, the obsolete lifecycle status should be weighed against a current converter because future availability, lot traceability, and long-term sourcing can outweigh the convenience of retaining this family.

مقایسه با جایگزین‌ها

پارامتر این محصول AD7441BRMZ AD7441BRM-REEL7
Brand Analog Devices Analog Devices Analog Devices
Package 8-pin MSOP 8-pin MSOP - same footprint 8-pin MSOP - same footprint
Resolution 10 bit 10 bit 10 bit
Conversion Rate 1 MSPS 1 MSPS 1 MSPS
Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Input Type Pseudo-differential analog input Pseudo-differential analog input Pseudo-differential analog input
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Interface Serial clock, active-low chip select, and serial data Serial clock, active-low chip select, and serial data Serial clock, active-low chip select, and serial data
Reference Voltage External, 100 mV to VDD External, 100 mV to VDD External, 100 mV to VDD
Orderable Packaging Tube Tape and reel orderable code Reel orderable code

تفاوت‌های کلیدی

  • Direct orderable coverage of the original AD7441 configuration (در مقابلAD7441BRMZ)
  • Reel-oriented procurement option for automated assembly (در مقابلAD7441BRM-REEL7)
  • Compact serial-interface integration (در مقابلAD7441BRMZ)
  • Single-supply operation across common embedded rails (در مقابلAD7441BRM-REEL7)

یادداشت‌های طراحی

Route the analog input and external reference directly to their associated pins, with no unnecessary stubs or shared high-current paths. Place the input and reference bypass or decoupling components close to the converter rather than at a distant connector. A compact analog island helps reduce differences in pickup between the input and reference networks, which is especially important when the converted signal is used for threshold decisions.

Keep the serial clock, chip-select, and serial-data traces short and drive them from the host controller with controlled edge rates. Avoid routing these signals alongside switching-node or high-current inductive traces. Confirm that the controller presents valid logic levels during idle periods and follows the acquisition and transfer timing in the manufacturer datasheet before enabling the interface.

Do not assume that the pseudo-differential input accepts arbitrary bipolar voltages. The input must remain within the limits associated with the selected 2.7 V to 5.25 V supply, and the external reference must remain between 100 mV and VDD. Also verify the package orientation and pin-one marking before assembly because the orderable codes use the same 8-pin MSOP footprint but different packaging arrangements.

Decouple the analog supply pin at the package with a low-inductance capacitor and follow the manufacturer layout recommendations for additional bulk and high-frequency capacitance. Treat the external reference as a precision analog node because its magnitude sets the conversion scale and its noise or drift becomes correlated measurement error. Power down the converter when the host system permits if the application targets minimum standby consumption.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the AD7441BRM. The converter is an analog signal-processing IC rather than an automotive-qualified device.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AD7441BRM datasheet AD7441BRM pinout AD7441BRM datasheet pdf AD7441BRM specifications AD7441BRM replacement AD7441BRM equivalent AD7441BRM vs AD7441BRMZ AD7441BRM 8 pin MSOP AD7441BRM price AD7441BRM stock Analog Devices AD7441BRM AD7441 10 bit 1 MSPS ADC AD7441BRM microcontroller interface AD7441BRM sensor acquisition AD7441BRM obsolete status

قطعات و اصطلاحات مرتبط

Analog Devices AD7441BRM AD7441BRMZ AD7441BRM-REEL7 AD7441 analog-to-digital converter ADC successive-approximation register SAR pseudo-differential input serial interface external reference 10-bit resolution 1 MSPS throughput single-supply operation 8-pin MSOP MSOP package family surface-mount package microcontroller data acquisition DSP interface industrial process monitoring sensor signal acquisition power management semiconductor Analog Devices AD7441 product page
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ