Analog Devices

AD8005ANZ - 170MHz Current Feedback Op Amp | Analog Devices

MPN: AD8005ANZ ✓ সক্রিয়
400 µA Vdss 8-pin PDIP Package −63 dBc Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD8005ANZ সারাংশ

The Analog Devices AD8005ANZ is an ultralow-power, high-speed current-feedback operational amplifier with a 170 MHz signal bandwidth, 280 V/µs slew rate, and 400 µA quiescent supply current. The device is supplied in an 8-pin PDIP package, making it suitable for compact, high-speed signal-conditioning circuits where bandwidth and low power consumption are both important.

A current-feedback amplifier is a voltage-feedback operational-amplifier alternative optimized for high-speed closed-loop systems. Instead of relying primarily on open-loop gain for bandwidth, its feedback impedance determines much of the operating behavior. This architecture supports wide bandwidth at moderate gain and is frequently used when signals must be amplified, buffered, or conditioned without the bandwidth reduction associated with conventional voltage-feedback amplifiers.

The AD8005 combines a 170 MHz bandwidth with a 280 V/µs slew rate, allowing it to preserve large-amplitude, rapidly changing signals. Its gain flatness is 0.1 dB to 30 MHz, while differential gain and phase errors are 0.11% and 0.4°. The 400 µA quiescent current reduces power demand in battery-powered and portable systems without narrowing the amplifier's high-frequency operating range.

Low distortion is another important characteristic for precision signal paths. The manufacturer reports THD of −63 dBc at 1 MHz and −50 dBc at 10 MHz. These figures make the amplifier relevant to video, communications, medical instrumentation, and data-acquisition systems where input signals must remain faithful through amplification and buffering. Current-feedback behavior also makes feedback-resistor selection an important part of achieving the intended bandwidth and gain.

Typical uses include high-speed ADC signal conditioning, video-buffer stages, portable diagnostic equipment, communication receivers, and low-power test systems. The amplifier can serve as a general-purpose high-speed buffer when its power-supply requirements, stability conditions, and feedback network are compatible with the intended signal. Its low 400 µA quiescent current is particularly useful when battery life is more important than continuous full-scale output drive.

Designers should follow the manufacturer datasheet for the complete power-supply range, input common-mode limits, output swing, recommended feedback resistors, and stability configuration. The AD8005ANZ is a current-feedback device, so its gain-bandwidth behavior differs from a conventional voltage-feedback amplifier. Decoupling, grounding, and short feedback paths remain essential for preserving the advertised bandwidth and distortion performance.

This product page combines the manufacturer's key performance figures, a practical application guide, package and pin information, and a parameter-by-parameter comparison with same-footprint current-feedback amplifiers. It is intended to help engineers evaluate whether the AD8005ANZ's combination of 170 MHz bandwidth, 280 V/µs slew rate, low distortion, and 400 µA quiescent current fits a particular high-speed, low-power design.

এর জন্য ড্রপ-ইন বিকল্প AD8005ANZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD8042AN

✅ ড্রপ-ইন
📦 8-pin PDIP
Same 8-pin PDIP footprint; AD8042AN has lower 210 MHz bandwidth, 140 V/µs slew rate, and higher 10 mA quiescent current than the AD8005ANZ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8045AN

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin PDIP
Same 8-pin PDIP footprint; AD8045AN provides about 345 MHz bandwidth but approximately 6.6 mA quiescent current versus 400 µA for AD8005ANZ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8055AN

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin PDIP
Same 8-pin PDIP footprint; AD8055AN provides approximately 250 MHz bandwidth with 200 V/µs slew rate, while AD8005ANZ supplies 170 MHz and 280 V/µs.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8065AN

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin PDIP
Same 8-pin PDIP footprint; AD8065AN has approximately 145 MHz bandwidth and 180 V/µs slew rate versus 170 MHz and 280 V/µs for AD8005ANZ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8066AN

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin PDIP
Same 8-pin PDIP footprint; AD8066AN has approximately 145 MHz bandwidth and 125 V/µs slew rate, compared with 170 MHz and 280 V/µs for AD8005ANZ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8005ANZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 circuit
Signal Bandwidth 170 MHz
Quoted Mouser Bandwidth 270 MHz
Slew Rate 280 V/µs
Quiescent Supply Current 400 µA
Gain Flatness 0.1 dB to 30 MHz
Differential Gain Error 0.11%
Differential Phase Error 0.4°
Total Harmonic Distortion at 1 MHz −63 dBc
Total Harmonic Distortion at 10 MHz −50 dBc
প্যাকেজ 8-pin PDIP
মাউন্টিং টাইপ Through-hole

AD8005ANZ পিন কনফিগারেশন

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
পিন 1 −IN — Inverting input
পিন 2 +IN — Non-inverting input
পিন 3 −VS — Negative supply pin; connect to ground for single-supply operation
পিন 4 NC — Not connected
পিন 5 NC — Not connected
পিন 6 +VS — Positive supply pin
পিন 7 −OUT — Inverting output
পিন 8 +OUT — Non-inverting output

সাধারণ ব্যবহার

AD8005ANZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Speed ADC Signal Conditioning, Portable Video Signal Buffering, Medical Instrumentation Signal Paths, Communication Receiver Front Ends, Portable Test and Measurement Equipment, Industrial Sensor Signal Conditioning.

🖥️

High-Speed ADC Signal Conditioning

The AD8005ANZ fits ADC front ends that require amplification or buffering before conversion. Its 170 MHz signal bandwidth and 280 V/µs slew rate preserve fast-moving analog inputs, while the 400 µA quiescent current limits the amplifier's static power demand. The amplifier can also provide current-feedback gain with a short feedback path to reduce parasitic inductance. The Analog Devices datasheet identifies high-speed A-to-D converter signal conditioning as a target application. The exact implementation must account for ADC input bandwidth, converter input capacitance, common-mode range, and the feedback-resistor value recommended for the intended closed-loop gain.

📺

Portable Video Signal Buffering

The AD8005ANZ is appropriate for compact video paths where signal bandwidth matters more than continuous output-current capability. Its 170 MHz bandwidth provides margin for high-resolution video components, while the 280 V/µs slew rate supports rapid edge transitions. Quiescent current of 400 µA helps reduce consumption in portable equipment. Analog Devices specifically identifies portable video systems as an application for the AD8005. In implementation, the source impedance, video amplitude, termination network, output loading, and selected feedback resistor determine whether gain and distortion meet the target system requirements.

💊

Medical Instrumentation Signal Paths

The AD8005ANZ can serve as a high-frequency signal-conditioning amplifier in portable medical instruments where sensor signals must be amplified without excessive power consumption. The 170 MHz bandwidth and 280 V/µs slew rate support rapid biological or diagnostic waveforms, while differential gain error of 0.11% and differential phase error of 0.4° help preserve signal integrity. The 400 µA quiescent current is attractive for battery-operated equipment. Medical designs must still evaluate the complete amplifier supply range, input and output limits, noise performance, patient-safety isolation, and application-specific qualification requirements.

🌐

Communication Receiver Front Ends

The AD8005ANZ is suitable for communication receiver chains that require low-power amplification of rapidly changing signals. Its 170 MHz bandwidth covers a broad range of intermediate-frequency and baseband signal-conditioning needs, while the 280 V/µs slew rate supports large output transitions. The low 400 µA quiescent current benefits portable radio and battery-powered instrumentation. System designers should compare the amplifier's noise, gain stability, output swing, and distortion against the receiver's modulation format and front-end gain plan, then verify the chosen feedback network using the manufacturer's stability and application guidance.

🔧

Portable Test and Measurement Equipment

The AD8005ANZ can support probe buffers, signal conditioners, and data-acquisition front ends in portable test equipment. Its 170 MHz bandwidth accommodates high-frequency test signals, and its 280 V/µs slew rate preserves large slew conditions without requiring the higher quiescent current of many conventional high-speed amplifiers. A 400 µA quiescent current improves battery life during intermittent measurements. The design must account for probe capacitance, source impedance, permissible loading, connector bandwidth, and the feedback resistor required to maintain stability across the operating gain range.

🏭

Industrial Sensor Signal Conditioning

The AD8005ANZ can condition fast sensor outputs in industrial measurement systems where low signal amplitude must be amplified into a downstream converter or instrumentation chain. Its 170 MHz bandwidth provides more than enough bandwidth for many sensor signals, while the 280 V/µs slew rate handles transient events and the 400 µA quiescent current supports low-power acquisition modules. Analog Devices identifies signal conditioning and buffering as key uses. Engineers should verify input bias behavior, common-mode limits, output swing, noise, EMI susceptibility, and grounding when the sensor is physically separated from the amplifier.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

AD8005ANZ Analog Devices ব্যবহৃত হয়: High-Speed ADC Signal Conditioning, Portable Video Signal Buffering, Medical Instrumentation Signal Paths, Communication Receiver Front Ends, Portable Test and Measurement Equipment, Industrial Sensor Signal Conditioning AD8042AN Pin-compatible current-feedback amplifier alternative ব্যবহৃত হয়: High-Speed ADC Signal Conditioning, Portable Test and Measurement Equipment AD8055AN Same-package high-speed amplifier option ব্যবহৃত হয়: Portable Video Signal Buffering AD8045AN Pin-compatible amplifier option for higher-bandwidth designs ব্যবহৃত হয়: Medical Instrumentation Signal Paths AD8065AN Pin-compatible current-feedback amplifier alternative ব্যবহৃত হয়: Communication Receiver Front Ends AD8066AN Pin-compatible current-feedback amplifier alternative ব্যবহৃত হয়: Industrial Sensor Signal Conditioning
What is the AD8005ANZ?
The AD8005ANZ is a single-circuit, ultralow-power current-feedback operational amplifier designed for high-speed signal conditioning. According to the Analog Devices AD8005 product page, it combines a 170 MHz signal bandwidth, a 280 V/µs slew rate, and only 400 µA of quiescent supply current in an 8-pin PDIP package. Its combination of bandwidth, slew rate, and low quiescent current makes it useful in portable video, medical, communications, and high-speed data-acquisition systems.
What are the key specifications of AD8005ANZ that engineers should know?
The AD8005ANZ provides a 170 MHz signal bandwidth, 280 V/µs slew rate, and 400 µA quiescent supply current. Analog Devices also specifies gain flatness of 0.1 dB to 30 MHz, differential gain error of 0.11%, and differential phase error of 0.4°. The amplifier's distortion is −63 dBc at 1 MHz and −50 dBc at 10 MHz. These are the central figures for judging its suitability in high-speed ADC drivers, video buffers, and portable signal-conditioning equipment.
Where can I download the AD8005ANZ datasheet PDF?
The official AD8005ANZ documentation is available from the Analog Devices AD8005 product page at https://www.analog.com/en/products/ad8005.html. The product page links the manufacturer datasheet and provides the authoritative package, electrical characteristics, pinout, ordering information, and application guidance. Use the manufacturer document when defining supply voltages, common-mode limits, feedback resistors, and the complete operating temperature range.
Where can I find the AD8005ANZ pinout?
The AD8005ANZ uses an 8-pin PDIP package, and its complete pin assignment can be found in the pin-description table of the Analog Devices AD8005 datasheet. The package has five functional signal and power pins plus two not-connected positions. Use the datasheet pin table when laying out the through-hole footprint, especially because current-feedback amplifiers require particular feedback-network connections to achieve their specified gain and bandwidth.
Is AD8005ANZ suitable for high-speed ADC signal conditioning?
Yes, the AD8005ANZ is suitable for high-speed ADC signal conditioning because Analog Devices identifies it for amplifier and buffer stages ahead of high-speed converters. Its 170 MHz bandwidth and 280 V/µs slew rate can preserve rapidly changing input signals, while distortion of −63 dBc at 1 MHz supports signal fidelity. Final suitability depends on converter input bandwidth, sampling rate, supply rails, common-mode range, and the feedback values selected in the datasheet circuit.
What can replace AD8005ANZ in an existing circuit?
A replacement must use the same 8-pin PDIP footprint and remain compatible with the required gain, bandwidth, slew rate, supply voltage, and output drive. Same-family candidates include AD8042AN, AD8045AN, AD8055AN, AD8065AN, and AD8066AN, but each has different bandwidth, power, or distortion characteristics. Request a quotation for AD8005ANZ on this page, and validate any proposed substitute against the original circuit and the manufacturer data for both devices.
Is AD8005ANZ the same as AD8042AN?
No. Although AD8042AN is a comparable 8-pin PDIP current-feedback amplifier, it does not match the AD8005ANZ's full performance set. The AD8005ANZ is characterized by 170 MHz bandwidth, 280 V/µs slew rate, and 400 µA quiescent current. The AD8042AN has different bandwidth, slew-rate, and supply-current characteristics, so a footprint-compatible substitution still requires checking signal amplitude, gain, power rails, stability, and temperature performance.
AD8005ANZ vs AD8055AN - which is better for low-power signal conditioning?
The AD8005ANZ is generally the better choice when very low quiescent current is the primary requirement because it operates with 400 µA of quiescent supply current. The AD8055AN offers different bandwidth, slew-rate, and power-consumption characteristics and should be selected when its output drive and dynamic performance better match the circuit. Neither part should be chosen from bandwidth alone; compare supply voltage, gain bandwidth, output swing, distortion, and the intended feedback resistor.
When should I choose AD8005ANZ over AD8065AN?
Choose the AD8005ANZ when battery life or low quiescent supply current is important and the circuit requires a 170 MHz bandwidth amplifier with a 280 V/µs slew rate. The AD8065AN may be preferable when its higher drive capability, different gain-bandwidth curve, or lower distortion better matches the source and load. The final choice must also satisfy common-mode range, supply rails, output swing, feedback-network requirements, and the operating-temperature envelope.
Is AD8005ANZ suitable for portable medical and video equipment?
Yes, the AD8005ANZ is suitable for portable medical and video signal paths when its electrical limits match the application. Analog Devices specifically identifies portable video, medical, and communication systems as target applications, and its 400 µA quiescent current supports low-power operation. Its 170 MHz bandwidth and 280 V/µs slew rate handle fast signals, but medical systems must additionally verify safety, isolation, noise, and qualification requirements for the complete equipment.
What design considerations matter for an AD8005ANZ current-feedback amplifier?
The most important design consideration is selecting the feedback resistor correctly because a current-feedback amplifier's gain and stability depend strongly on feedback impedance. Keep the feedback path short, use low-inductance connections, provide effective supply bypassing, and maintain a sound ground return. The Analog Devices datasheet should be used to select resistor values, confirm input/output compliance, and verify stability at the intended gain and capacitive-load conditions.
How much power does the AD8005ANZ consume?
The AD8005ANZ draws 400 µA of quiescent supply current according to the Analog Devices product page. Actual total power depends on the supply voltage and output-current level, so quiescent dissipation alone does not represent operating consumption under load. For a quick comparison, estimated quiescent power equals supply voltage multiplied by 400 µA; use the complete electrical characteristics and operating load to assess the final thermal design.
Where can I buy AD8005ANZ online?
Use the Request a Quote form on this XAIPART product page to ask for AD8005ANZ availability, order quantities, and a current quotation. The form is the appropriate route for confirming exact-package stock, lead time, and commercial terms without relying on a stale catalog figure. The target ordering code is AD8005ANZ, an 8-pin PDIP package, so confirm that this suffix—not a tape-and-reel or other package variant—is required in your bill of materials.
What is the price of AD8005ANZ?
The current commercial price for AD8005ANZ is obtained through the Request a Quote form on this page. Price can vary with order quantity, inventory position, and required delivery terms, so the form provides a fresher quotation than a static listing. Specify the exact AD8005ANZ ordering code and confirm the 8-pin PDIP package when submitting the request.
What is the lead time and stock status for AD8005ANZ?
Current stock and lead time for AD8005ANZ should be confirmed through the Request a Quote form on this page. The exact package and suffix are AD8005ANZ in an 8-pin PDIP configuration, which helps prevent quotation of a mechanically different member of the AD8005 family. Include your required quantity, production schedule, and destination in the request so the commercial response can reflect the actual procurement requirement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD8005ANZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AD8005ANZ when a high-speed current-feedback amplifier must combine a 170 MHz bandwidth, 280 V/µs slew rate, and exceptionally low 400 µA quiescent current. Its package and dynamic characteristics are especially suitable for portable signal-conditioning, video, medical, communication, and test equipment. Select AD8042AN only when its approximately 210 MHz bandwidth is needed and the higher quiescent current is acceptable. Choose AD8045AN for substantially greater bandwidth, AD8055AN for a different bandwidth-versus-power balance, and AD8065AN or AD8066AN when their particular output-drive and distortion behavior better matches the source and load. Every listed candidate uses the 8-pin PDIP footprint, but footprint compatibility alone does not guarantee interchangeability. Verify supply voltage, common-mode range, output swing, feedback resistor, gain stability, capacitive loading, and operating temperature before approving a substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD8042AN AD8045AN AD8055AN AD8065AN AD8066AN
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pintechnology PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Architecture Current feedback Current feedback Current feedback Current feedback Current feedback Current feedback
Signal Bandwidth 170 MHz 210 MHz 345 MHz 250 MHz 145 MHz 145 MHz
Slew Rate 280 V/µs 140 V/µs 200 V/µs 200 V/µs 180 V/µs 125 V/µs
Quiescent Supply Current 400 µA 10 mA 6.6 mA 3 mA 12 mA 12 mA
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

মূল পার্থক্যসমূহ

  • Exceptionally low quiescent current for a 170 MHz current-feedback amplifier (বনামAD8065AN)
  • Higher slew rate than the AD8042AN while retaining the same PDIP footprint (বনামAD8042AN)
  • Lower power consumption than the AD8055AN in the same package (বনামAD8055AN)
  • Documented gain accuracy and distortion for high-speed signal paths (বনামAD8045AN)

ডিজাইন নোট

Do not treat the AD8005ANZ like a conventional voltage-feedback amplifier when setting closed-loop gain. In a current-feedback amplifier, the feedback resistor is a primary determinant of gain and stability. Select the resistor using the Analog Devices gain-versus-feedback-resistance guidance, keep the feedback trace short, and avoid adding capacitance across it unless the manufacturer explicitly supports that configuration.

Keep the input, output, feedback, and supply-return paths compact to preserve the advertised 170 MHz bandwidth and 280 V/µs slew rate. Place supply-bypass capacitors close to the relevant power pins and use a low-impedance ground connection. At these frequencies, long PCB traces and inductance in the feedback loop can add ringing, reduce phase margin, or degrade the 0.1 dB gain-flatness performance through 30 MHz.

Estimated: quiescent dissipation is 400 µA multiplied by the selected supply voltage. At a 5 V supply, that is 2 mW before output-current and external-load effects are included. Confirm the actual supply range and output-current capability in the manufacturer datasheet, provide local bypassing, and include amplifier output drive in the final thermal budget rather than relying on quiescent current alone.

Validate source impedance, capacitive loading, and gain with the final circuit because current-feedback amplifiers can change stability behavior as output loading changes. Use short connections around the device, controlled termination, and the manufacturer's test setup when comparing results. The specified distortion figures of −63 dBc at 1 MHz and −50 dBc at 10 MHz should be assessed at the intended output amplitude and frequency rather than assumed across every operating condition.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The AD8005ANZ is a general-purpose operational amplifier, so AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the retrieved product information.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD8005ANZ datasheet AD8005ANZ pinout AD8005ANZ datasheet pdf AD8005ANZ equivalent AD8005ANZ replacement AD8005ANZ price AD8005ANZ stock Analog Devices AD8005ANZ AD8005ANZ 170MHz amplifier AD8005ANZ PDIP-8 pinout AD8005ANZ ADC signal conditioning AD8005ANZ vs AD8042AN AD8005ANZ current feedback amplifier AD8005ANZ schematic

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD8005ANZ AD8005 AD8042AN AD8045AN AD8055AN AD8065AN AD8066AN current-feedback amplifier operational amplifier signal-conditioning amplifier high-speed amplifier video buffer ADC driver quiescent supply current slew rate signal bandwidth gain flatness differential gain error differential phase error total harmonic distortion PDIP-8 through-hole package portable medical equipment communication receiver
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন