Analog Devices

AD8005ARZ - 170MHz Low-Power Current-Feedback Amplifier | Analog Devices

MPN: AD8005ARZ ✓ সক্রিয়
400 µA Vdss 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD8005ARZ সারাংশ

The Analog Devices AD8005ARZ is an ultralow-power, high-speed current-feedback amplifier with a 170 MHz signal bandwidth, 280 V/µs slew rate, and 400 µA quiescent supply current in an 8-pin SOIC package. It is designed for signal-chain applications requiring wide bandwidth and low power consumption, including battery-powered instrumentation, communications, and high-speed analog signal conditioning.

A current-feedback amplifier is a voltage-feedback amplifier architecture in which the closed-loop bandwidth can remain relatively wide as gain increases, provided the feedback resistor is selected according to the manufacturer’s recommended values. The AD8005 combines this architecture with low quiescent current and a low-power operating range, helping preserve battery life while providing substantially more bandwidth than a conventional precision op amp.

The AD8005ARZ features a wide signal bandwidth of 170 MHz, a slew rate of 280 V/µs, and gain flatness of 0.1 dB through 30 MHz. Its 400 µA quiescent supply current is particularly useful in portable systems where amplifier power consumption directly affects available operating time. The device also supports operation from a single 5 V supply or dual supplies, allowing it to interface with systems using modern mixed-signal power rails.

The current-feedback topology is particularly appropriate for high-speed buffers, video-signal paths, analog-to-digital converter input stages, and communications circuits where conventional voltage-feedback amplifiers can suffer bandwidth reduction as gain increases. The AD8005’s combination of high speed and low supply current makes it useful in portable test equipment, low-power imaging systems, and battery-operated measurement platforms.

The most important design consideration is the feedback network. Use the resistor values and gain configuration shown in the AD8005 manufacturer datasheet, and place the feedback components close to the amplifier pins to minimize parasitic capacitance. Decoupling capacitors should be positioned directly beside the supply pins, with a short return path to minimize supply noise and high-frequency instability.

This product page combines the AD8005ARZ electrical characteristics with application guidance, design notes, pricing references, and pin-compatible alternatives. It is intended to help engineers identify the correct amplifier for portable, high-speed, and low-power analog systems while preserving the same SOIC-8 board footprint.

এর জন্য ড্রপ-ইন বিকল্প AD8005ARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD8055

✅ ড্রপ-ইন
📦 SOIC-8
Higher-power high-speed current-feedback amplifier; AD8005ARZ is specified at 400 µA quiescent current, while the AD8055 has a substantially higher power budget.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8056

✅ ড্রপ-ইন
📦 SOIC-8
Higher-power high-speed current-feedback amplifier with different current consumption and operating characteristics from the 400 µA AD8005ARZ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD8005ARZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Current-feedback amplifier
Number of Circuits 1 circuit
Signal Bandwidth 170 MHz
Slew Rate 280 V/µs
Quiescent Supply Current 400 µA
Gain Flatness 0.1 dB through 30 MHz
সাপ্লাই ভোল্টেজ 5 V
Common-Mode Rejection Ratio 54 dB
অপারেটিং তাপমাত্রা -40 °C to +85 °C
Package Type 8-pin SOIC
মাউন্টিং টাইপ Surface mount

AD8005ARZ 8-pin soic পিন কনফিগারেশন গাইড

AD8005ARZ (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD8005ARZ-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD8005ARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD8005ARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable High-Speed Measurement, High-Speed ADC Signal Conditioning, Battery-Powered Communications, Video Signal Buffering, Industrial Sensor Interfaces, Low-Power Test and Measurement.

📱

Portable High-Speed Measurement

The AD8005ARZ fits portable measurement equipment because it combines a 170 MHz signal bandwidth with only 400 µA of quiescent supply current. Place the device close to the sensor or converter being measured to preserve high-frequency content without adding substantial standing power demand. Its current-feedback architecture is useful for fixed-gain and moderate-gain signal paths, while the 280 V/µs slew rate helps preserve large-signal performance. Check the required output swing, load capacitance, and feedback resistor values for the selected gain before finalizing the circuit.

🖥️

High-Speed ADC Signal Conditioning

Use the AD8005ARZ to condition signals entering a high-speed ADC when the converter requires more bandwidth or slew capability than a general-purpose amplifier can provide. Its 170 MHz signal bandwidth and 280 V/µs slew rate support high-bandwidth acquisition paths, while the low 400 µA quiescent current helps preserve portable-system operating time. Because the device uses current feedback, select the feedback resistor from the manufacturer’s gain table and validate settling behavior with the actual ADC input network, source impedance, and sampling clock.

🌐

Battery-Powered Communications

The AD8005ARZ is appropriate for battery-powered communication modules that need signal amplification without the power draw of a conventional high-speed voltage-feedback amplifier. Its 400 µA quiescent current is especially useful in intermittent or always-on portable links, while 170 MHz bandwidth provides margin for high-speed data paths. Confirm that the amplifier’s supply voltage, output swing, and drive capability match the transmitter or receiver interface. Keep the feedback network compact and use local supply decoupling to maintain low-noise operation.

📺

Video Signal Buffering

The AD8005ARZ can serve as a high-speed buffer in compact video and imaging systems where the required bandwidth exceeds ordinary precision op-amp capabilities. Its 170 MHz bandwidth, 280 V/µs slew rate, and 0.1 dB gain flatness through 30 MHz help preserve signal integrity across the analog path. The current-feedback topology is useful for maintaining bandwidth as gain increases, but the feedback resistor must follow the datasheet recommendations. Account for video timing, output loading, connector capacitance, and the allowable propagation delay of the complete system.

🏭

Industrial Sensor Interfaces

The AD8005ARZ is useful for industrial sensor interfaces that must preserve high-frequency content while keeping amplifier consumption low. A sensor front end may use the device as a gain stage or buffer before a converter or controller, benefiting from the 170 MHz bandwidth and 280 V/µs slew rate. The 400 µA quiescent current is valuable in distributed or battery-backed sensing nodes. Verify sensor output range, common-mode voltage, noise requirements, and grounding strategy because the available device data does not specify every input and output limit for every operating condition.

🔧

Low-Power Test and Measurement

The AD8005ARZ fits portable oscilloscope, probe-interface, and general-purpose test equipment where bandwidth and power must be balanced. Its 170 MHz signal bandwidth can support fast-edge measurement and signal-conditioning paths, while 400 µA quiescent current helps extend battery-powered instrument runtime. Use the current-feedback gain and resistor recommendations from the manufacturer and keep the input network short. For a permanent instrument design, verify thermal performance, output drive into the probe or converter load, and the required settling time over the full measurement bandwidth.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

AD8055 Related single high-speed current-feedback amplifier ব্যবহৃত হয়: Portable High-Speed Measurement, High-Speed ADC Signal Conditioning, Battery-Powered Communications, Video Signal Buffering, Industrial Sensor Interfaces, Low-Power Test and Measurement AD8056 Related single high-speed current-feedback amplifier ব্যবহৃত হয়: Portable High-Speed Measurement, High-Speed ADC Signal Conditioning, Battery-Powered Communications, Video Signal Buffering, Industrial Sensor Interfaces, Low-Power Test and Measurement
What is the AD8005ARZ?
The AD8005ARZ is a single current-feedback operational amplifier from Analog Devices. It combines a 170 MHz signal bandwidth, 280 V/µs slew rate, and 400 µA quiescent supply current in an 8-pin SOIC package. According to the AD8005 manufacturer datasheet, it is intended for low-power, high-speed signal-conditioning applications where conventional voltage-feedback amplifiers may consume too much power or lose bandwidth at higher closed-loop gains.
What is the bandwidth and slew rate of AD8005ARZ?
The AD8005ARZ provides a 170 MHz signal bandwidth and a slew rate of 280 V/µs. These specifications allow the amplifier to process high-speed signals while maintaining low quiescent supply current of 400 µA. The AD8005 manufacturer page also specifies gain flatness of 0.1 dB through 30 MHz, making the device useful for video, communications, instrumentation, and ADC-driver signal paths.
Why is the AD8005ARZ suitable for battery-powered systems?
The AD8005ARZ is suitable for battery-powered systems because its quiescent supply current is only 400 µA while its bandwidth is 170 MHz. The low current reduces the amplifier’s standing power requirement, while the high bandwidth preserves dynamic performance in portable measurement, imaging, and communication equipment. The AD8005 manufacturer datasheet identifies the device as an ultralow-power, high-speed amplifier for these applications.
Where can I download the AD8005ARZ datasheet PDF?
The official AD8005 product page provides the manufacturer documentation and technical details at analog.com/en/products/ad8005.html. Use that page for the current AD8005 datasheet, application information, electrical characteristics, and package details. The AD8005ARZ ordering code identifies the 8-pin SOIC version of the amplifier, and engineers should use the manufacturer document for the authoritative pin description and recommended application circuits.
Where can I find the AD8005ARZ pinout?
The AD8005ARZ pinout is defined in the manufacturer datasheet for the 8-pin SOIC package. The AD8005ARZ is a single-amplifier device, so the SOIC-8 outline contains power, ground, input, output, and feedback-related connections rather than four independent amplifier channels. Use the pin-description table and package drawing in the AD8005 documentation when assigning PCB nets and confirming the exposed connections.
Is the AD8005ARZ a voltage-feedback or current-feedback amplifier?
The AD8005ARZ is a current-feedback amplifier. In this architecture, the feedback impedance and resistor selection determine the practical gain-bandwidth behavior, and the AD8005 manufacturer describes gain flatness of 0.1 dB through 30 MHz. Designers should follow the datasheet feedback-resistor tables rather than transfer voltage-feedback compensation techniques directly to this device.
What is the difference between AD8005ARZ and AD8055?
The AD8055 is also a single high-speed current-feedback amplifier in the same general SOIC-8 amplifier family, but it is not a drop-in replacement for every AD8005ARZ design. The key distinction is operating power: the AD8005 is specified at 400 µA quiescent current, while the AD8055 is a higher-power high-speed amplifier. Review the complete electrical limits, feedback values, and package pin assignment in both datasheets before substituting.
When should I choose AD8005ARZ over AD8055?
Choose the AD8005ARZ when low quiescent current is more important than the AD8055’s higher-power high-speed capability. The AD8005ARZ combines 170 MHz bandwidth with 400 µA quiescent current, making it a strong candidate for portable equipment and low-power signal chains. Choose AD8055 only after confirming that its higher power consumption, electrical limits, feedback network, and pinout meet the target circuit requirements.
Can AD8055 replace AD8005ARZ?
The AD8055 can be considered as a candidate replacement only after a detailed electrical and pin-level review. It is a single high-speed current-feedback amplifier in the same SOIC-8 format, but the AD8005ARZ’s defining characteristic is its 400 µA quiescent current. If the replacement does not preserve that low-power requirement, the change may alter battery life, thermal behavior, and the surrounding feedback-network design.
What is the best cross-brand equivalent for AD8005ARZ?
The AD8005ARZ’s closest alternative should be selected by matching the 8-pin SOIC footprint, current-feedback pinout, supply range, bandwidth, slew rate, and quiescent current. No cross-brand part can be identified confidently from the available documentation alone, so request a quote for the original part and ask the manufacturer or an authorized source to confirm a specific substitute. Do not select a generic high-speed op amp without checking its feedback topology and pin compatibility.
How should I design the feedback network for AD8005ARZ?
Design the AD8005ARZ feedback network using the resistor values and gain tables in the manufacturer datasheet. Current-feedback amplifiers require the feedback resistor to be selected for the intended gain, and placing it close to the inverting input reduces parasitic effects. Keep the feedback loop compact, use short output traces, and verify stability with the actual load capacitance and source impedance.
What power-supply decoupling does AD8005ARZ need?
The AD8005ARZ should be decoupled with capacitors placed as close as practical to its supply and ground pins. Follow the manufacturer’s recommended decoupling values and ensure that the return path is short. A compact layout reduces supply-loop impedance and helps the amplifier maintain its specified high-speed behavior while limiting switching-noise coupling into sensitive analog signals.
Is AD8005ARZ suitable for ADC input applications?
The AD8005ARZ can be suitable for high-speed ADC input signal conditioning when the ADC bandwidth, settling requirements, and input impedance are compatible with the amplifier. Its 170 MHz bandwidth and 280 V/µs slew rate provide ample dynamic capability for many high-speed paths, while the current-feedback topology supports wide bandwidth at higher gain. Validate the complete settling-time and output-swing requirements for the specific converter.
How does low quiescent current affect AD8005ARZ thermal design?
The AD8005ARZ’s 400 µA quiescent current reduces inherent amplifier dissipation, but total power also depends on supply voltage and output current. In battery-powered systems, the low standing current can dominate operating-time calculations. In higher-current applications, calculate dissipation from the actual supply voltage, output voltage, load current, and quiescent current, then verify the SOIC package temperature rise against the manufacturer’s thermal limits.
What are the key specifications of AD8005ARZ engineers should know?
The key AD8005ARZ specifications are 170 MHz signal bandwidth, 280 V/µs slew rate, 400 µA quiescent supply current, 0.1 dB gain flatness through 30 MHz, and an 8-pin SOIC package. The Analog Devices product information identifies it as an ultralow-power, high-speed current-feedback amplifier. These figures make it especially relevant to portable instrumentation, communications, video, and high-speed ADC signal paths.
How do I request a quote for AD8005ARZ?
Use the Request a Quote form on this page to request current commercial terms, stock, packaging options, and lead time for AD8005ARZ. Commercial availability can change with the exact ordering code, tube or reel packaging, and production demand. For technical confirmation, consult the official Analog Devices product page and datasheet for the 8-pin SOIC version and its recommended operating conditions.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD8005ARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AD8005ARZ when the design needs high bandwidth and low quiescent current in a single-amplifier SOIC-8 circuit. Its 170 MHz bandwidth, 280 V/µs slew rate, and 400 µA quiescent current are particularly attractive for portable instrumentation, communications, high-speed ADC signal conditioning, and video buffering. The AD8055 and AD8056 are related high-speed current-feedback amplifiers in the same SOIC-8 format, but they should be selected when their higher-power operating characteristics better match the required gain, drive, and supply conditions. Because current-feedback resistor selection is gain-dependent, validate the feedback network, output swing, load capacitance, and settling behavior in the target circuit. Use the Request a Quote form for current commercial availability and lead time.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD8055 AD8056
Package SOIC-8 SOIC-8 SOIC-8
Brand Analog Devices Analog Devices Analog Devices
Amplifier Type Current-feedback amplifier Current-feedback amplifier Current-feedback amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit

মূল পার্থক্যসমূহ

  • Lower quiescent current for portable designs (বনামAD8055)
  • High-speed bandwidth with low standby power (বনামAD8056)
  • Gain flatness across the mid-band (বনামAD8055)

ডিজাইন নোট

Place the feedback resistor and associated compensation or gain-setting components close to the AD8005ARZ pins, especially when operating at high speed. Keep the input and output traces short, avoid routing sensitive nodes beneath the device, and return the bypass-capacitor ground directly to the ground pin. Current-feedback amplifiers are sensitive to parasitic capacitance in the feedback loop, so a compact layout can be more important than a nominally correct but physically large resistor arrangement.

Use local supply decoupling and follow the manufacturer’s recommended capacitor values. Place the input capacitor directly beside the positive supply pin and the ground capacitor beside the ground connection, with minimal loop area. The AD8005ARZ’s low 400 µA quiescent current reduces standing power, but the complete design should still check supply noise, output-current capability, and the voltage drop caused by wiring resistance during transient load events.

Do not select the feedback resistor by applying voltage-feedback amplifier design rules. Use the AD8005 manufacturer’s gain-versus-feedback-resistance recommendations and account for the actual source impedance, load capacitance, and target gain. Also verify that the 8-pin SOIC pin assignment matches the selected amplifier configuration before routing the PCB, because the same package family can contain amplifier variants with different operating or disable functions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status was not explicitly stated in the available product information. Confirm the current declarations and package material documentation with Analog Devices before release to production.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD8005ARZ datasheet AD8005ARZ datasheet pdf AD8005ARZ pinout AD8005ARZ equivalent AD8005ARZ replacement AD8005ARZ cross reference AD8005ARZ vs AD8055 AD8005ARZ vs AD8056 AD8005ARZ price AD8005ARZ stock Analog Devices AD8005ARZ AD8005ARZ application circuit AD8005ARZ current feedback amplifier AD8005ARZ SOIC-8 amplifier What can replace AD8005ARZ?

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD8005ARZ AD8055 AD8056 current-feedback amplifier operational amplifier amplifier IC high-speed amplifier analog signal conditioning 170 MHz bandwidth 280 V/µs slew rate 400 µA quiescent current gain flatness SOIC-8 QFN family surface mount ADC input driver video buffer battery-powered instrumentation feedback resistor supply decoupling common-mode rejection ratio RoHS REACH AEC-Q100
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন