Analog Devices

AD825AR - 30MHz High-Speed JFET Amplifier | Analog Devices

MPN: AD825AR ✓ সক্রিয়
12 nV/sqrt(Hz) Vdss 20 pA Id 8-lead SOIC Package 1 MHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD825AR সারাংশ

Analog Devices AD825AR is a single-channel, high-speed JFET-input operational amplifier with a 30 MHz gain-bandwidth product, 80 V/us slew rate, and 8-lead SOIC package. The device is designed for signal-conditioning and data-acquisition systems that require low input bias current, low voltage noise, and consistent small-signal performance.

A JFET-input operational amplifier is a voltage-amplifying semiconductor that uses junction field-effect transistors at its input. This input architecture provides low input bias current, making the AD825AR suitable for sensors, instrumentation, and high-impedance signal sources. Within the broader hierarchy, it belongs to the operational-amplifier family, which supports analog signal conditioning, measurement, feedback control, and data acquisition.

The principal advantages of the AD825AR include an input bias current of 20 pA, input voltage noise of 12 nV/sqrt(Hz), and input current noise of 10 fA/sqrt(Hz). Its 80 V/us slew rate supports accurate reproduction of rapidly changing signals, while the 30 MHz gain-bandwidth product provides useful bandwidth for low-amplitude, high-frequency content. The amplifier is optimized for fully specified ±15 V operation.

Its low-noise JFET input stage is particularly useful when source impedance makes amplifier input current important. The combination of low bias current, low voltage noise, and high slew rate allows the device to process signals from sensors, transducers, and measurement front ends without allowing input bias effects to overwhelm the wanted signal. AC performance, gain, bandwidth, slew rate, and drive capability remain stable over temperature according to the manufacturer documentation.

Typical applications include precision signal conditioning, low-level waveform acquisition, current monitoring, instrumentation, and buffered sensor interfaces. The AD825AR can also serve as an input buffer between a high-impedance transducer and a downstream measurement or conversion stage. Its operating characteristics make it particularly useful when low-frequency noise and source loading must be balanced against wideband signal support.

When designing around the AD825AR, place input and feedback components close to the relevant pins and provide adequate bypassing on the positive and negative supply rails. Confirm output swing, load current, input common-mode range, and stability requirements against the actual circuit. Avoid placing high-impedance nodes next to long switching-current paths, since parasitic capacitance can disturb gain, bandwidth, and settling behavior.

This product page combines the manufacturer specifications, a practical application analysis, same-footprint replacement guidance, and design-focused comparisons. It helps engineers evaluate the AD825AR not only by headline bandwidth, but also by noise, bias current, slew rate, drive capability, supply requirements, and PCB implementation constraints.

এর জন্য ড্রপ-ইন বিকল্প AD825AR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD825ACHIPS

✅ ড্রপ-ইন
📦 8-SOIC
Published gain-bandwidth product is 26 MHz versus 30 MHz for AD825AR, a 13.3% reduction; common-mode rejection remains 80 dB

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD825AR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type JFET-input operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 30 MHz
Slew Rate 80 V/us
Input Bias Current 20 pA
Input Voltage Noise 12 nV/sqrt(Hz)
Input Current Noise 10 fA/sqrt(Hz)
Fully Specified Supply Voltage ±15 V
Low-Distortion Test Frequency 1 MHz
প্যাকেজ 8-lead SOIC
পিন সংখ্যা 8 pins
মাউন্টিং টাইপ Surface mount
Input Stage JFET
Output Drive Capability High output drive capability
Gain Stability Stable under varying load conditions

AD825AR পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 OFFSET NULL — Offset null connection
পিন 2 -IN — Inverting input
পিন 3 +IN — Non-inverting input
পিন 4 V- — Negative supply connection
পিন 5 OFFSET NULL — Offset null connection
পিন 6 OUT — Amplifier output
পিন 7 V+ — Positive supply connection
পিন 8 NC — Not connected

সাধারণ ব্যবহার

AD825AR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Impedance Sensor Buffering, Precision Data Acquisition Front End, Instrumentation Signal Conditioning, Current Monitoring and Measurement, Low-Level Waveform Amplification, Audio and Communication Interface Buffers.

🧩

High-Impedance Sensor Buffering

The AD825AR is appropriate for buffering high-impedance sensors because its JFET input stage has a 20 pA input bias current, reducing the current drawn from the source. A 12 nV/sqrt(Hz) input voltage noise specification also supports low-level signal conditioning. Place the amplifier near the sensor output and use short input traces to minimize capacitive loading. The 30 MHz gain-bandwidth product provides more bandwidth than is normally required for slow sensor signals, while the 80 V/us slew rate can preserve fast transients without excessive distortion.

📊

Precision Data Acquisition Front End

AD825AR fits low-level data-acquisition front ends where input bias current and source noise determine the usable measurement floor. Its 20 pA input bias current minimizes perturbation of a high-impedance transducer, while the 12 nV/sqrt(Hz) voltage-noise figure supports precision amplification. Use it in a non-inverting or inverting conditioning stage with short feedback components. Confirm the closed-loop gain against the 30 MHz gain-bandwidth product and the 80 V/us slew rate, especially when the selected feedback resistor creates a wide bandwidth.

🔧

Instrumentation Signal Conditioning

The AD825AR can amplify instrumentation signals that combine modest bandwidth with low-level amplitude. Its JFET input architecture avoids the higher bias current associated with many bipolar input amplifiers, and the documented 20 pA value helps preserve sensor output integrity. The amplifier also offers high output drive capability for downstream instrumentation stages. Select external resistor values to establish the required gain, keep the feedback loop compact, and verify output-voltage headroom over the complete operating range before committing to the circuit.

⚡

Current Monitoring and Measurement

AD825AR is suitable for current-monitoring circuits when the sense element has appreciable source impedance and the measured waveform changes quickly. The 20 pA input bias current limits unwanted integration across a high-resistance sense path, and the 80 V/us slew rate supports clearer reproduction of rapid current edges. Use the amplifier around the sense element with attention to common-mode voltage and output swing. Its 30 MHz gain-bandwidth product makes it appropriate for small, wideband signals, but the design should still verify loop stability over the intended gain.

📈

Low-Level Waveform Amplification

AD825AR supports low-level waveform amplification when the signal has modest amplitude but requires clean transition reproduction. The 80 V/us slew rate helps the amplifier follow changing waveforms without the slew-related distortion expected from slower devices, while the 12 nV/sqrt(Hz) input voltage noise supports small-signal work. Keep the input and feedback connections short and use grounded, stable reference connections. Check output amplitude and load capability against the measured waveform to ensure the operating point remains within the device's rated swing range.

🌐

Audio and Communication Interface Buffers

AD825AR can buffer audio or communication interface signals where low input current and moderate high-frequency performance are useful. The JFET input stage's 20 pA bias current reduces loading, and the 30 MHz gain-bandwidth product supports higher-frequency content than a conventional low-speed precision amplifier. The 80 V/us slew rate is also useful for preserving edge shapes. Use the device as a voltage follower or low-gain stage when an impedance buffer is required, and verify the source impedance, output load, and required signal bandwidth to avoid unnecessary noise or instability.

What is the AD825AR?
The AD825AR is a single-channel, high-speed JFET-input operational amplifier from Analog Devices. It combines a 30 MHz gain-bandwidth product, an 80 V/us slew rate, and low input bias current in an 8-lead SOIC package. According to the Analog Devices AD825 datasheet, the amplifier is optimized for general-purpose signal conditioning and data-acquisition applications where input loading, noise, and bandwidth must be balanced.
What are the key specifications of AD825AR that engineers should know?
The AD825AR's principal specifications are a 30 MHz gain-bandwidth product, 80 V/us slew rate, 20 pA input bias current, 12 nV/sqrt(Hz) input voltage noise, and 10 fA/sqrt(Hz) input current noise. The Analog Devices AD825 datasheet identifies the device as a high-speed JFET amplifier supplied in an 8-lead SOIC package and fully specified for ±15 V operation.
Where can I download the AD825AR datasheet PDF?
The official AD825AR datasheet PDF is available from Analog Devices at the manufacturer's AD825 technical-documentation URL. It contains the general description, electrical characteristics, ordering information, and package details for the AD825 family, including AD825AR. Use the pin-description table and ordering guide in that document when assigning an existing board layout or confirming the 8-lead SOIC footprint.
Where can I find the AD825AR pinout?
The AD825AR pinout is shown in the pin-configuration section of the Analog Devices AD825 datasheet. The device uses an 8-lead SOIC footprint with offset-null, input, supply, output, and no-connect positions. Use the manufacturer's pin-description table when routing feedback, decoupling, and offset-adjustment networks so that the physical orientation matches the package marking.
What is the input bias current of AD825AR?
The AD825AR has a typical input bias current of 20 pA. This low value is a key benefit of its JFET-input architecture and helps minimize loading on high-impedance sensors and transducers. According to the Analog Devices AD825 datasheet, the amplifier combines this low bias current with 12 nV/sqrt(Hz) input voltage noise and 10 fA/sqrt(Hz) input current noise for low-level signal work.
What is the gain-bandwidth product of AD825AR?
The AD825AR has a 30 MHz gain-bandwidth product. This figure indicates the approximate closed-loop bandwidth obtainable at unity gain, while usable bandwidth at higher closed-loop gains is lower. According to the Analog Devices AD825 datasheet, the 80 V/us slew rate and stable behavior over temperature support accurate handling of small, rapidly changing signals.
Is AD825AR suitable for high-impedance sensor signal conditioning?
Yes, AD825AR is well suited to high-impedance sensor signal conditioning because its 20 pA input bias current limits source loading. The 12 nV/sqrt(Hz) input voltage noise is also useful for low-amplitude measurements. According to the Analog Devices AD825 datasheet, the device is optimized for broad signal-conditioning and data-acquisition work involving JFET input characteristics.
What applications use AD825AR?
AD825AR is commonly used in low-level signal conditioning, data acquisition, instrumentation, sensor buffering, waveform processing, and current monitoring. Its 30 MHz gain-bandwidth product and 80 V/us slew rate suit modest-frequency signals with fast transitions, while its 20 pA bias current protects high-impedance sources from excessive loading. The Analog Devices AD825 datasheet describes the device as a general-purpose high-speed JFET amplifier.
How does AD825AR compare with AD825ACHIPS?
AD825AR and AD825ACHIPS belong to the same Analog Devices AD825 family, but the published comparison identifies a gain-bandwidth-product difference of 30 MHz for AD825AR versus 26 MHz for AD825ACHIPS. Both are described as single high-frequency amplifiers with 80 dB common-mode rejection. Verify the exact package, pin arrangement, supply conditions, and ordering requirements before treating either ordering code as a drop-in substitution.
When should I choose AD825AR over another JFET amplifier?
Choose AD825AR when a design needs the combination of a 30 MHz gain-bandwidth product, 80 V/us slew rate, approximately 20 pA input bias current, and 8-lead SOIC availability. The Analog Devices AD825 datasheet emphasizes stable AC performance and drive capability. Compare this combination with alternatives on noise density, common-mode range, output swing, supply voltage, and exact pin configuration rather than bandwidth alone.
Is AD825AR the same as AD825ACHIPS?
No. AD825AR and AD825ACHIPS are related AD825-family ordering options, but the published comparison lists a 30 MHz gain-bandwidth product for AD825AR and 26 MHz for AD825ACHIPS. Although both are described as single high-frequency amplifiers with 80 dB common-mode rejection, engineers must confirm package dimensions and pin compatibility before substitution.
What can replace AD825AR?
The closest documented related option is AD825ACHIPS, but it is not an unqualified drop-in replacement because its published gain-bandwidth product is 26 MHz versus 30 MHz for AD825AR. Other high-speed amplifiers may provide similar functions but require separate validation of package, pinout, input bias current, voltage noise, supply range, output swing, and stability. Use the AD825 datasheet as the controlling requirement document.
What is the best drop-in replacement for AD825AR?
No fully verified drop-in replacement with a complete AD825AR pin, package, and parameter comparison was identified. AD825ACHIPS is the closest family-related candidate, but its published 26 MHz gain-bandwidth product is lower than the AD825AR's 30 MHz figure, and package equivalence is not established in the available documentation. Validate the footprint and full operating limits before committing to a replacement.
Is AD825AR in stock, and what is its lead time?
Current stock and manufacturing lead time should be confirmed through the Request a Quote form on this page. The manufacturer lists the AD825AR as an available part, but current inventory and delivery schedules can vary by order quantity and package code. Submit the required quantity, target date, and shipment location with the quote request to obtain a current commitment.
Where can I buy AD825AR and what is the price?
Use the Request a Quote form on this page to request AD825AR pricing, availability, minimum order quantity, and lead time. The request should state the required quantity, package preference, destination, and target delivery date. Because pricing and inventory are time-sensitive, the quote form provides current purchasing information without embedding a static price that could become outdated.
How should I decouple and lay out an AD825AR circuit?
Place the supply-bypass capacitors close to the positive and negative supply pins, and keep the feedback loop compact around the amplifier. Route the non-inverting input and inverting input as short signal paths, especially when their impedance is high. The Analog Devices AD825 datasheet is the controlling reference for pin assignments, supply limits, output swing, and compensation requirements.
Is AD825AR RoHS compliant and automotive qualified?
The RoHS, REACH, lead-free, halogen-free, and AEC-Q100 status of AD825AR must be confirmed from the current manufacturer product documentation or declaration for the exact ordering code. These compliance claims should not be inferred from the amplifier category. Request the applicable material or environmental declaration during purchasing review if the product will enter a regulated or automotive design.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD825AR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose AD825AR when the design needs a low-bias-current JFET input, a 30 MHz gain-bandwidth product, and an 80 V/us slew rate in an 8-lead SOIC package. It is particularly attractive for high-impedance sensors, low-level instrumentation, current monitoring, and moderate-bandwidth waveform conditioning. AD825ACHIPS is the closest documented family-related option when its lower published 26 MHz gain-bandwidth product is acceptable, but the exact package and electrical limits should be checked before substitution. Other high-speed JFET amplifiers should be selected only after comparing input bias current, voltage and current noise, common-mode range, output swing, supply requirements, slew rate, stability, and footprint. For designs that need very low voltage noise rather than exceptionally low input current, a different amplifier family may provide a better noise-voltage-to-offset trade-off. For very fast signals, the 80 V/us slew rate and output-drive capability of AD825AR must be checked against the waveform amplitude and load.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD825ACHIPS
Brand Analog Devices Analog Devices
Package 8-SOIC 8-SOIC
Gain-Bandwidth Product 30 MHz 26 MHz
Common-Mode Rejection Ratio 80 dB 80 dB
Number of Channels 1 channel 1 channel

মূল পার্থক্যসমূহ

  • Higher published gain-bandwidth product within the AD825 family (বনামAD825ACHIPS)
  • JFET input architecture for low source loading (বনামAD825ACHIPS)
  • Low-noise input characterized for precision conditioning (বনামAD825ACHIPS)

ডিজাইন নোট

Place input, feedback, and bypass components close to their corresponding AD825AR pins. High-impedance input traces should be short and surrounded by a grounded reference plane where practical. Keep the inverting-input and feedback nodes compact because parasitic capacitance in the feedback loop can alter bandwidth and stability. Follow the manufacturer datasheet's pin configuration and printed-circuit-board layout guidance for the 8-lead SOIC footprint.

Use local supply bypassing to control impedance on the V+ and V- pins, and route the return current through a low-impedance path rather than through analog-signal ground. Decoupling capacitance and placement should be selected with the actual source impedance and expected transient load in mind. Verify that both supply rails remain within the limits specified by the AD825 datasheet under startup, shutdown, and load transients.

The AD825AR's 30 MHz gain-bandwidth product and 80 V/us slew rate make input capacitance and excess loop gain important at higher frequencies. Select feedback resistors that preserve the intended bandwidth and avoid unnecessarily large resistance at the inverting input. Confirm output loading and amplitude before assuming the full small-signal bandwidth or slew-rate capability is usable in the finished circuit.

Do not select a replacement based only on the JFET label or bandwidth. Check pinout, package dimensions, input bias current, voltage noise, common-mode range, output swing, supply requirements, and stability together. AD825ACHIPS is a related family option, but its published 26 MHz gain-bandwidth product is lower than the AD825AR's 30 MHz value. Verify the exact ordering code before treating it as interchangeable.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status was not established for the exact AD825AR ordering code and requires review of the current manufacturer environmental and material declarations.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD825AR datasheet AD825AR pinout AD825AR datasheet pdf AD825AR specifications AD825AR 30MHz amplifier AD825AR 80 V/us slew rate AD825AR 20 pA bias current AD825AR SOIC-8 Analog Devices AD825AR AD825AR signal conditioning AD825AR vs AD825ACHIPS AD825AR equivalent AD825AR replacement AD825AR price AD825AR stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD825AR AD825ACHIPS AD825 JFET-input operational amplifier operational amplifier signal-conditioning IC data-acquisition IC precision amplifier gain-bandwidth product slew rate input bias current input voltage noise input current noise common-mode rejection ratio 8-lead SOIC SOIC package family surface-mount package high-impedance sensor waveform conditioning current monitoring instrumentation offset null positive feedback risk semiconductor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন