ADF4113HVBCPZ - 4GHz, 15V PLL Synthesizer | Analog Devices
MPN: ADF4113HVBCPZ ✓ সক্রিয়ADF4113HVBCPZ সারাংশ
A PLL frequency synthesizer belongs to the clock-and-timing IC category and generates a controllable output frequency by comparing a reference signal with a divided feedback signal. The phase-frequency detector and charge pump drive an external voltage-controlled oscillator, while a programmable loop filter converts the charge-pump output into the VCO tuning voltage. An integer-N architecture provides straightforward frequency synthesis without fractional-N interpolation.
The principal feature of the ADF4113HV is its 15 V charge pump. Unlike a conventional charge-pump synthesizer intended mainly for low-voltage VCOs, this implementation can support tuning voltages up to 15 V and may operate with a passive loop filter. The 4 GHz operating ceiling supports RF and microwave synthesis requirements, while the integrated programming architecture permits divider and counter settings to be configured by the host controller.
The ADF4113HV architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. These blocks form the feedback and tuning loop around an external VCO. The high-voltage pump is particularly relevant where the VCO requires a substantially higher tuning range than the synthesizer's digital and analog supply rails.
Typical uses include wireless receiver and transmitter local oscillators, microwave up-converters and down-converters, high-tuning-range VCOs, instrumentation, and industrial RF systems. The device can also serve as the frequency-setting element in closed-loop RF systems where phase noise, lock behavior, and tuning-voltage headroom determine usable signal quality.
A critical design consideration is the external loop filter. Its resistance, capacitance, charge-pump current, and VCO gain must be selected together to provide adequate lock range and stable phase margin without excessive ringing. PCB grounding and decoupling also affect reference noise and charge-pump behavior, so the exposed pad should be connected to the ground plane using a thermal and electrical via arrangement consistent with the package guidance.
This page combines the manufacturer's high-voltage PLL positioning with package-level information, sourcing guidance, verified design context, and careful selection criteria. It is intended to help engineers distinguish the ADF4113HV from standard ADF4113 variants, identify the correct 20-pin footprint, and assess whether its 15 V charge-pump capability matches the tuning requirements of the intended VCO.
এর জন্য ড্রপ-ইন বিকল্প ADF4113HVBCPZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ADF4113HVBCPZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Prescaler, Package, Product Type, Reference Divider, A Counter.
ADF4113BCPZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ADF4113HVBCPZ বিশেষণ
| Product Type | Integer-N frequency synthesizer |
| Maximum Synthesizer Frequency | 4 GHz |
| Charge Pump Voltage | 15 V |
| Supported VCO Tuning Voltage | Up to 15 V |
| Architecture | Integer-N PLL |
| Phase Detector | Digital phase-frequency detector |
| Prescaler | Dual-modulus P/P+1 |
| Counter A Width | 6 bits |
| Counter B Width | 13 bits |
| Reference Divider | Programmable |
| প্যাকেজ | 20-lead WFQFN with exposed pad |
| পিন সংখ্যা | 20 pins |
| মাউন্টিং টাইপ | Surface mount |
ADF4113HVBCPZ 20-lead wfqfn with exposed pad পিন কনফিগারেশন গাইড
ADF4113HVBCPZ (20-lead wfqfn with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADF4113HVBCPZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ADF4113HVBCPZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Voltage VCO Local Oscillator, Wireless Transmitter Up-Conversion, Wireless Receiver Down-Conversion, Microwave VCO Control, Industrial RF Signal Source, Test and Measurement Instrumentation.
High-Voltage VCO Local Oscillator
The ADF4113HVBCPZ fits a local-oscillator block whose external VCO requires a tuning voltage approaching 15 V. Its 15 V high-voltage charge pump provides substantially more tuning headroom than a conventional low-voltage PLL architecture, while integer-N synthesis supports programmed frequencies up to 4 GHz. The synthesizer can be paired with a passive loop filter when the VCO gain and tuning range are compatible. Designers should verify charge-pump polarity, loop bandwidth, reference phase noise, and the VCO sensitivity before finalizing the filter. The exposed-pad package also requires an electrically and thermally connected ground land pattern so that the high-voltage charge-pump and digital sections operate with a low-impedance return path.
সুপারিশকৃত
Wireless Transmitter Up-Conversion
The ADF4113HVBCPZ can generate the programmable local-oscillator signal used by a wireless transmitter up-conversion path. The integer-N architecture and 4 GHz maximum synthesis frequency are suitable for RF local-oscillator generation, while the 15 V charge pump is useful when the selected VCO requires a high tuning voltage. Place the synthesizer and loop filter close to the reference source, keep the VCO control path short, and evaluate reference spur contribution before relying on the nominal phase-noise performance. Passive-loop operation can simplify the RF control path for suitable high-voltage VCOs, but stability must be checked across the VCO gain range and temperature.
সুপারিশকৃত
Wireless Receiver Down-Conversion
In a receiver down-converter, the ADF4113HVBCPZ supplies the programmed oscillator used to translate an RF signal to a lower intermediate frequency. Its 4 GHz ceiling covers a substantial portion of common microwave receiver architectures, and the 15 V charge pump supports VCOs whose tuning voltage exceeds conventional charge-pump limits. The design priority is a low-noise reference and a loop filter that locks cleanly while preserving channel spacing and rejection requirements. Account for integer-N division ratios, reference frequency, reference spur energy, and VCO phase noise during the receiver budget. The 20-lead WFQFN footprint requires careful exposed-pad grounding to maintain stable supply and reference behavior.
সুপারিশকৃত
Microwave VCO Control
The ADF4113HVBCPZ is appropriate for controlling a microwave VCO that requires a broad or elevated tuning-voltage range. Its documented 15 V charge pump directly addresses the need to tune such an oscillator, and the passive-loop-filter capability can reduce loop complexity compared with an active filter arrangement. Engineering work should begin with the VCO tuning slope and minimum-to-maximum voltage range, then select loop resistance and capacitance to achieve the desired phase margin and lock time. Account for VCO gain changes over frequency and temperature because they can alter both loop damping and the maximum phase-error correction. Grounding and decoupling around the exposed pad remain essential for predictable synthesizer operation.
সুপারিশকৃত
Industrial RF Signal Source
The ADF4113HVBCPZ can serve as the programmable frequency-setting element in an industrial RF signal source when the chosen VCO operates at frequencies up to 4 GHz and requires a high tuning voltage. The integer-N feedback architecture provides deterministic division ratios, making it useful when fractional-N interpolation is unnecessary. A clean reference clock and carefully isolated loop filter help control unwanted modulation and spurious outputs. For factory or instrumentation equipment, evaluate temperature drift, retune range, lock time, and phase noise over the operating environment. The WFQFN exposed pad should be soldered according to the manufacturer land pattern, with several ground vias placed to support both electrical return and thermal conduction.
সুপারিশকৃত
Test and Measurement Instrumentation
The ADF4113HVBCPZ is useful in test and measurement equipment that generates a tunable RF or microwave reference for exercising receivers, mixers, filters, and antennas. Its 4 GHz integer-N synthesis range supports frequency-plan generation, and the 15 V charge pump accommodates high-tuning-range VCOs commonly used in laboratory sources. The reference input quality and loop-filter design directly influence spectral purity, so time-domain and spectral measurements should include both lock behavior and phase noise. A shielded, well-grounded implementation helps prevent the reference and charge-pump circuitry from coupling into sensitive measurement paths. The exposed-pad package must be connected according to the Analog Devices package guidance.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADF4113HVBCPZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADF4113BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 20-lead WFQFN with exposed pad | 20-lead WFQFN with exposed pad |
| Synthesizer Type | Integer-N frequency synthesizer | Integer-N frequency synthesizer |
| Maximum Synthesizer Frequency | 4 GHz | 4 GHz |
| Charge Pump | 15 V high-voltage charge pump | Standard lower-voltage charge pump |
| Prescaler | Dual-modulus P/P+1 | Dual-modulus P/P+1 |
| Counter Configuration | 6-bit A counter and 13-bit B counter | 6-bit A counter and 13-bit B counter |
| Reference Divider | Programmable | Programmable |
মূল পার্থক্যসমূহ
- Supports high-voltage VCO tuning (বনামADF4113BCPZ)
- Matches the documented 4 GHz synthesis class (বনামADF4113BCPZ)
- Simplifies suitable high-voltage loop arrangements (বনামADF4113BCPZ)
ডিজাইন নোট
Use the Analog Devices land pattern and pin-description table to assign the 20-lead WFQFN footprint. Connect the exposed pad to the ground plane with multiple thermal and electrical vias, and keep the charge-pump, loop-filter, and reference connections compact. Because the 15 V charge pump increases the tuning range available to the external VCO, control-impedance discontinuities and long loop-filter traces can add phase shift and contribute to loop instability.
Do not select the standard ADF4113BCPZ merely because it uses the same 20-lead WFQFN footprint. The ADF4113HVBCPZ is selected specifically for its 15 V high-voltage charge pump and support for VCO tuning voltages up to 15 V. Confirm that the external VCO, loop-filter topology, charge-pump polarity, and supply arrangement satisfy the ADF4113HV electrical requirements before reusing an existing ADF4113 layout.
Design the passive loop filter from the actual charge-pump current, VCO gain, reference frequency, prescaler value, and required phase margin. VCO gain can vary with tuning voltage, frequency, and temperature, so a filter that locks only at one operating point may fail elsewhere. Validate lock range, settling time, and spurious response using the final reference source and representative VCO.
Preserve reference-clock quality by keeping the reference path away from the charge-pump and VCO control routing. Use a low-impedance ground reference for the exposed pad and bypass the supply pins according to the manufacturer application circuit. Reference phase noise and supply coupling can dominate close-to-carrier phase noise, even when the synthesizer itself is operating correctly.
কমপ্লায়েন্স তথ্য
Compliance status is not stated on the manufacturer pages included for this product.