Analog Devices

ADF4113HVBCPZ - 4GHz, 15V PLL Synthesizer | Analog Devices

部品番号: ADF4113HVBCPZ ✓ 生産中
15 V Vdss 20-lead WFQFN with exposed pad Package 4 GHz Speed
MOQ: 1 |

ADF4113HVBCPZ 概要

The Analog Devices ADF4113HVBCPZ is an integer-N frequency synthesizer with a 4 GHz maximum synthesizer frequency, a high-voltage 15 V charge pump, and a 20-lead WFQFN exposed-pad package. It is designed for voltage-controlled oscillators whose tuning voltage can reach 15 V. The device is recommended by Analog Devices for new designs.

A PLL frequency synthesizer belongs to the clock-and-timing IC category and generates a controllable output frequency by comparing a reference signal with a divided feedback signal. The phase-frequency detector and charge pump drive an external voltage-controlled oscillator, while a programmable loop filter converts the charge-pump output into the VCO tuning voltage. An integer-N architecture provides straightforward frequency synthesis without fractional-N interpolation.

The principal feature of the ADF4113HV is its 15 V charge pump. Unlike a conventional charge-pump synthesizer intended mainly for low-voltage VCOs, this implementation can support tuning voltages up to 15 V and may operate with a passive loop filter. The 4 GHz operating ceiling supports RF and microwave synthesis requirements, while the integrated programming architecture permits divider and counter settings to be configured by the host controller.

The ADF4113HV architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. These blocks form the feedback and tuning loop around an external VCO. The high-voltage pump is particularly relevant where the VCO requires a substantially higher tuning range than the synthesizer's digital and analog supply rails.

Typical uses include wireless receiver and transmitter local oscillators, microwave up-converters and down-converters, high-tuning-range VCOs, instrumentation, and industrial RF systems. The device can also serve as the frequency-setting element in closed-loop RF systems where phase noise, lock behavior, and tuning-voltage headroom determine usable signal quality.

A critical design consideration is the external loop filter. Its resistance, capacitance, charge-pump current, and VCO gain must be selected together to provide adequate lock range and stable phase margin without excessive ringing. PCB grounding and decoupling also affect reference noise and charge-pump behavior, so the exposed pad should be connected to the ground plane using a thermal and electrical via arrangement consistent with the package guidance.

This page combines the manufacturer's high-voltage PLL positioning with package-level information, sourcing guidance, verified design context, and careful selection criteria. It is intended to help engineers distinguish the ADF4113HV from standard ADF4113 variants, identify the correct 20-pin footprint, and assess whether its 15 V charge-pump capability matches the tuning requirements of the intended VCO.

ドロップイン代替品: ADF4113HVBCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADF4113HVBCPZ (同一形状・フットプリント) — 相違点: Prescaler, Package, Product Type, Reference Divider, A Counter.

Analog Devices
Prescaler: Programmable dual-modulus P/P+1 prescaler
Product Type: Single integer-N RF PLL frequency synthesizer
Reference Divider: Programmable divider
比較対象 ADF4113HVBCPZ →
Analog Devices
Prescaler: Programmable dual-modulus P/P+1
Package: 20-lead LFCSP with exposed pad
Product Type: Single integer-N RF PLL frequency synthesizer
比較対象 ADF4113HVBCPZ →
Analog Devices
Prescaler: 4/5 or 8/9 dual modulus
Package: 20-lead LFCSP, 4 mm x 4 mm
比較対象 ADF4113HVBCPZ →

ADF4113BCPZ

✅ ドロップイン
Analog Devices
📦 20-lead WFQFN with exposed pad
Single integer-N RF PLL frequency synthesizer · 4 GHz · 5 MHz · 165 MHz · Integer-N · 1 · 6 bits · 13 bits

価格はお問い合わせください

データシートを見る →

ADF4113HVBCPZ 仕様

Product Type Integer-N frequency synthesizer
Maximum Synthesizer Frequency 4 GHz
Charge Pump Voltage 15 V
Supported VCO Tuning Voltage Up to 15 V
Architecture Integer-N PLL
Phase Detector Digital phase-frequency detector
Prescaler Dual-modulus P/P+1
Counter A Width 6 bits
Counter B Width 13 bits
Reference Divider Programmable
パッケージ 20-lead WFQFN with exposed pad
ピン数 20 pins
実装タイプ Surface mount

ADF4113HVBCPZ 20-lead wfqfn with exposed pad ピン配置ガイド

ADF4113HVBCPZ (20-lead wfqfn with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADF4113HVBCPZ の 20-lead wfqfn with exposed pad パッケージピン配置図

詳細なピン配置データはありません: ADF4113HVBCPZ.

詳細は データシート をご参照ください。

主な用途

ADF4113HVBCPZ の用途: 6 件s: High-Voltage VCO Local Oscillator, Wireless Transmitter Up-Conversion, Wireless Receiver Down-Conversion, Microwave VCO Control, Industrial RF Signal Source, Test and Measurement Instrumentation.

🌐

High-Voltage VCO Local Oscillator

The ADF4113HVBCPZ fits a local-oscillator block whose external VCO requires a tuning voltage approaching 15 V. Its 15 V high-voltage charge pump provides substantially more tuning headroom than a conventional low-voltage PLL architecture, while integer-N synthesis supports programmed frequencies up to 4 GHz. The synthesizer can be paired with a passive loop filter when the VCO gain and tuning range are compatible. Designers should verify charge-pump polarity, loop bandwidth, reference phase noise, and the VCO sensitivity before finalizing the filter. The exposed-pad package also requires an electrically and thermally connected ground land pattern so that the high-voltage charge-pump and digital sections operate with a low-impedance return path.

🌐

Wireless Transmitter Up-Conversion

The ADF4113HVBCPZ can generate the programmable local-oscillator signal used by a wireless transmitter up-conversion path. The integer-N architecture and 4 GHz maximum synthesis frequency are suitable for RF local-oscillator generation, while the 15 V charge pump is useful when the selected VCO requires a high tuning voltage. Place the synthesizer and loop filter close to the reference source, keep the VCO control path short, and evaluate reference spur contribution before relying on the nominal phase-noise performance. Passive-loop operation can simplify the RF control path for suitable high-voltage VCOs, but stability must be checked across the VCO gain range and temperature.

📡

Wireless Receiver Down-Conversion

In a receiver down-converter, the ADF4113HVBCPZ supplies the programmed oscillator used to translate an RF signal to a lower intermediate frequency. Its 4 GHz ceiling covers a substantial portion of common microwave receiver architectures, and the 15 V charge pump supports VCOs whose tuning voltage exceeds conventional charge-pump limits. The design priority is a low-noise reference and a loop filter that locks cleanly while preserving channel spacing and rejection requirements. Account for integer-N division ratios, reference frequency, reference spur energy, and VCO phase noise during the receiver budget. The 20-lead WFQFN footprint requires careful exposed-pad grounding to maintain stable supply and reference behavior.

📶

Microwave VCO Control

The ADF4113HVBCPZ is appropriate for controlling a microwave VCO that requires a broad or elevated tuning-voltage range. Its documented 15 V charge pump directly addresses the need to tune such an oscillator, and the passive-loop-filter capability can reduce loop complexity compared with an active filter arrangement. Engineering work should begin with the VCO tuning slope and minimum-to-maximum voltage range, then select loop resistance and capacitance to achieve the desired phase margin and lock time. Account for VCO gain changes over frequency and temperature because they can alter both loop damping and the maximum phase-error correction. Grounding and decoupling around the exposed pad remain essential for predictable synthesizer operation.

🏭

Industrial RF Signal Source

The ADF4113HVBCPZ can serve as the programmable frequency-setting element in an industrial RF signal source when the chosen VCO operates at frequencies up to 4 GHz and requires a high tuning voltage. The integer-N feedback architecture provides deterministic division ratios, making it useful when fractional-N interpolation is unnecessary. A clean reference clock and carefully isolated loop filter help control unwanted modulation and spurious outputs. For factory or instrumentation equipment, evaluate temperature drift, retune range, lock time, and phase noise over the operating environment. The WFQFN exposed pad should be soldered according to the manufacturer land pattern, with several ground vias placed to support both electrical return and thermal conduction.

🔧

Test and Measurement Instrumentation

The ADF4113HVBCPZ is useful in test and measurement equipment that generates a tunable RF or microwave reference for exercising receivers, mixers, filters, and antennas. Its 4 GHz integer-N synthesis range supports frequency-plan generation, and the 15 V charge pump accommodates high-tuning-range VCOs commonly used in laboratory sources. The reference input quality and loop-filter design directly influence spectral purity, so time-domain and spectral measurements should include both lock behavior and phase noise. A shielded, well-grounded implementation helps prevent the reference and charge-pump circuitry from coupling into sensitive measurement paths. The exposed-pad package must be connected according to the Analog Devices package guidance.

おすすめ製品の概要

ADF4113HVBCPZ Analog Devices 使用用途: High-Voltage VCO Local Oscillator, Wireless Transmitter Up-Conversion, Wireless Receiver Down-Conversion, Microwave VCO Control, Industrial RF Signal Source, Test and Measurement Instrumentation ADF4113BCPZ Analog Devices 使用用途: High-Voltage VCO Local Oscillator, Microwave VCO Control ADF4113HVBCPZ-RL7 Related ADF4113HV ordering configuration 使用用途: Wireless Transmitter Up-Conversion ADF4113 Related integer-N frequency-synthesizer family 使用用途: Wireless Receiver Down-Conversion ADF4113HV High-voltage PLL product family 使用用途: Industrial RF Signal Source ADF4153YCPZ Analog Devices 使用用途: Test and Measurement Instrumentation
What is the ADF4113HVBCPZ?
The ADF4113HVBCPZ is an integer-N PLL frequency synthesizer manufactured by Analog Devices. It supports synthesis up to 4 GHz and uses a high-voltage 15 V charge pump for VCOs with tuning voltages up to 15 V. The device is packaged in a 20-lead WFQFN with an exposed pad. According to the Analog Devices ADF4113HV product page, it is recommended for new designs and can use a passive loop filter when driving a high-voltage VCO.
Where can I download the ADF4113HVBCPZ datasheet PDF?
The official ADF4113HV datasheet is available through the Analog Devices ADF4113HV product page at https://www.analog.com/en/products/adf4113hv.html. The ADF4113HVBCPZ ordering code belongs to the ADF4113HV family, whose data sheet is identified as Revision B. Use the manufacturer document for the authoritative pin descriptions, register map, electrical characteristics, recommended application circuit, and package dimensions.
Where can I find the ADF4113HVBCPZ pinout?
Use the pin-description table and package drawing in the Analog Devices ADF4113HV datasheet for the definitive ADF4113HVBCPZ pinout. The component is a 20-lead WFQFN with an exposed pad, and the exposed pad has a dedicated land pattern and thermal design role. Do not infer the exposed-pad connection from an image alone; follow the pin-description table and land-pattern drawing when assigning PCB tracks and ground vias.
What is the difference between ADF4113HVBCPZ and ADF4113BCPZ?
The principal difference is the charge-pump voltage: ADF4113HVBCPZ provides a 15 V high-voltage charge pump, while the standard ADF4113 family version is intended for lower-tuning-voltage VCOs. Both are associated with 4 GHz integer-N synthesizer operation and a 20-lead WFQFN exposed-pad package, but the charge-pump difference can materially alter loop-filter design. Confirm the complete pin functions and electrical limits in the respective Analog Devices datasheets before substitution.
ADF4113HVBCPZ vs ADF4113BCPZ — which is better for a high-voltage VCO?
The ADF4113HVBCPZ is the better choice for a VCO that requires tuning voltages approaching 15 V because it uses a 15 V charge pump. The standard ADF4113BCPZ is intended for lower-voltage tuning requirements. Both support synthesis up to 4 GHz, but the correct choice depends on VCO tuning range, loop-filter components, charge-pump current, and supply arrangement rather than operating frequency alone.
When should I choose ADF4113HVBCPZ over a standard ADF4113BCPZ?
Choose ADF4113HVBCPZ when the VCO requires a high tuning voltage, particularly near the documented 15 V limit of its high-voltage charge pump. Choose ADF4113BCPZ when the VCO operates from a substantially lower tuning range and the standard charge-pump architecture better matches the loop design. Both can synthesize to 4 GHz, so the VCO tuning requirement and passive-loop suitability are the decisive selection criteria.
Is ADF4113HVBCPZ suitable for wireless transmitter and receiver local oscillators?
Yes, the ADF4113HVBCPZ is suitable for wireless local oscillators when the VCO has a high tuning voltage. Its integer-N architecture supports programmable frequency synthesis up to 4 GHz, while the 15 V charge pump supports VCO tuning voltages up to 15 V. This makes it particularly useful in microwave up-conversion and down-conversion paths where the external VCO cannot be driven adequately by a conventional low-voltage charge pump.
What is the best drop-in replacement for ADF4113HVBCPZ?
No replacement should be treated as a confirmed drop-in without reviewing the complete pin and electrical tables. ADF4113BCPZ uses the related 4 GHz integer-N family and the same 20-lead WFQFN exposed-pad format, but its lower-voltage charge-pump capability is a functional constraint rather than an interchangeable detail. The high-voltage behavior, programming interface, register compatibility, exposed-pad connection, and loop-filter requirements must all be verified before a replacement is approved.
What can replace ADF4113HVBCPZ in an RF design?
The closest same-family option is the standard ADF4113BCPZ, but it should replace the ADF4113HVBCPZ only when the VCO tuning voltage and charge-pump loop remain within its limits. No cross-brand drop-in replacement was confirmed by the available manufacturer and cross-reference information. For a production change, request manufacturer application review or perform a complete pin, register, electrical, and RF-loop comparison rather than relying on package identity alone.
Is there an Analog Devices equivalent with the same 15 V charge-pump function?
The Analog Devices family associated directly with the 15 V charge-pump function is ADF4113HV, which includes the ADF4113HVBCPZ ordering configuration. The standard ADF4113 family performs the same broad integer-N synthesis role but does not provide the same high-voltage VCO drive. Engineers should treat the exact suffix, package, temperature range, and ordering configuration as significant rather than treating every ADF4113-family device as electrically identical.
Where can I buy ADF4113HVBCPZ and check its current lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ADF4113HVBCPZ. Because pricing and inventory can change by package and purchasing quantity, obtain a current quotation for the exact ordering code before committing the part to a production schedule.
How much does ADF4113HVBCPZ cost?
The current unit price for ADF4113HVBCPZ should be obtained through the Request a Quote form on this page. Commercial pricing depends on quantity, package configuration, and current supplier conditions, so a static value can become inaccurate quickly. Submit the required quantity and target project information with the quote request for a current commercial response.
Is ADF4113HVBCPZ in stock?
Current stock for ADF4113HVBCPZ should be confirmed through the Request a Quote form on this page. The component is shown by Analog Devices as recommended for new designs, which supports current design consideration, but it does not by itself establish a specific lot quantity or delivery date. Include your required quantity and schedule when requesting availability confirmation.
What are the key specifications of ADF4113HVBCPZ that engineers should know?
The key ADF4113HVBCPZ specifications are integer-N frequency synthesis to 4 GHz, a 15 V high-voltage charge pump, support for VCO tuning voltages up to 15 V, and a 20-lead WFQFN exposed-pad package. Its architecture also provides a programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus prescaler. These characteristics place it between a low-voltage PLL and a high-tuning-range RF oscillator system.
How should the ADF4113HVBCPZ loop filter be designed?
Design the loop filter from the charge-pump current, VCO gain, reference frequency, prescaler, target lock range, and required phase margin. The ADF4113HV can support a passive loop filter for high-voltage VCO tuning, but component tolerances can shift damping and lock behavior. Analyze the loop with the actual VCO tuning range and reference clock, then verify settling time and spurious performance on hardware.

エンジニアリング参考データ: ADF4113HVBCPZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADF4113HVBCPZ when the external VCO needs tuning voltages approaching 15 V and the system requires integer-N frequency synthesis up to 4 GHz. Its high-voltage charge pump and passive-loop-filter capability distinguish it from the standard ADF4113BCPZ. The standard ADF4113BCPZ is more appropriate when the VCO operates at substantially lower tuning voltages and the existing loop-filter architecture is designed around that charge pump. Do not make a replacement solely from package and frequency matching: confirm the complete pin assignment, register behavior, supply requirements, charge-pump polarity, programming sequence, exposed-pad connection, and VCO loop stability. For a cross-brand second source, no confirmed pin-to-pin option was established; request manufacturer or specialist engineering review before using a different PLL family.

代替品との比較

パラメータ この製品 ADF4113BCPZ
Brand Analog Devices Analog Devices
Package 20-lead WFQFN with exposed pad 20-lead WFQFN with exposed pad
Synthesizer Type Integer-N frequency synthesizer Integer-N frequency synthesizer
Maximum Synthesizer Frequency 4 GHz 4 GHz
Charge Pump 15 V high-voltage charge pump Standard lower-voltage charge pump
Prescaler Dual-modulus P/P+1 Dual-modulus P/P+1
Counter Configuration 6-bit A counter and 13-bit B counter 6-bit A counter and 13-bit B counter
Reference Divider Programmable Programmable

主な差別化要因

  • Supports high-voltage VCO tuning (vs ADF4113BCPZ)
  • Matches the documented 4 GHz synthesis class (vs ADF4113BCPZ)
  • Simplifies suitable high-voltage loop arrangements (vs ADF4113BCPZ)

設計ノート

Use the Analog Devices land pattern and pin-description table to assign the 20-lead WFQFN footprint. Connect the exposed pad to the ground plane with multiple thermal and electrical vias, and keep the charge-pump, loop-filter, and reference connections compact. Because the 15 V charge pump increases the tuning range available to the external VCO, control-impedance discontinuities and long loop-filter traces can add phase shift and contribute to loop instability.

Do not select the standard ADF4113BCPZ merely because it uses the same 20-lead WFQFN footprint. The ADF4113HVBCPZ is selected specifically for its 15 V high-voltage charge pump and support for VCO tuning voltages up to 15 V. Confirm that the external VCO, loop-filter topology, charge-pump polarity, and supply arrangement satisfy the ADF4113HV electrical requirements before reusing an existing ADF4113 layout.

Design the passive loop filter from the actual charge-pump current, VCO gain, reference frequency, prescaler value, and required phase margin. VCO gain can vary with tuning voltage, frequency, and temperature, so a filter that locks only at one operating point may fail elsewhere. Validate lock range, settling time, and spurious response using the final reference source and representative VCO.

Preserve reference-clock quality by keeping the reference path away from the charge-pump and VCO control routing. Use a low-impedance ground reference for the exposed pad and bypass the supply pins according to the manufacturer application circuit. Reference phase noise and supply coupling can dominate close-to-carrier phase noise, even when the synthesizer itself is operating correctly.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status is not stated on the manufacturer pages included for this product.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADF4113HVBCPZ datasheet ADF4113HVBCPZ datasheet pdf ADF4113HVBCPZ pinout ADF4113HVBCPZ equivalent ADF4113HVBCPZ replacement ADF4113HVBCPZ cross reference ADF4113HVBCPZ footprint ADF4113HVBCPZ price ADF4113HVBCPZ stock Analog Devices ADF4113HVBCPZ ADF4113HVBCPZ vs ADF4113BCPZ ADF4113HVBCPZ 4GHz PLL ADF4113HVBCPZ 15V charge pump ADF4113HVBCPZ application circuit

関連部品&用語

Analog Devices ADF4113HVBCPZ ADF4113HV ADF4113BCPZ integer-N frequency synthesizer PLL phase-locked loop clock and timing IC high-voltage charge pump voltage-controlled oscillator VCO phase-frequency detector programmable reference divider dual-modulus prescaler passive loop filter 4 GHz 15 V 20-lead WFQFN exposed pad surface-mount package wireless receiver wireless transmitter local oscillator up-conversion down-conversion
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示