ADF4360-6BCPRL7 - 1.25 GHz RF Synthesizer | Analog Devices
MPN: ADF4360-6BCPRL7 ✓ সক্রিয়ADF4360-6BCPRL7 সারাংশ
An integer-N synthesizer generates an output frequency by comparing the divided feedback signal with a reference frequency. In the broader semiconductor hierarchy, the ADF4360-6 is a clock and timing IC, then a frequency synthesizer, then an integer-N PLL with an integrated VCO. This integrated approach combines phase locking, frequency division, and RF generation in one package, reducing the number of separate RF components required in a radio or test-equipment design.
Key features include a 1150 MHz VCO center frequency, RF output capability extending to 1.25 GHz, and an optional divide-by-2 output between 525 MHz and 625 MHz. Its reference input range of 10 MHz to 250 MHz supports common external reference sources. The 24-WFQFN exposed-pad construction provides a compact surface-mount footprint and a direct thermal path into the PCB when its exposed pad is properly soldered.
The internal architecture uses integer-N feedback to multiply a reference frequency into the required RF output. The synthesizer supports programmable frequency control through a serial interface, allowing the system controller to set the operating channel. Because the VCO is integrated, the external RF network is simpler than a discrete oscillator arrangement, although loop-filter, reference, decoupling, and output-matching layouts remain critical at high frequencies.
Typical applications include RF transceiver local-oscillator generation, wireless communication equipment, frequency conversion blocks, industrial RF test equipment, and instrumentation requiring programmable RF outputs. The 1.25 GHz output is particularly relevant to RF communications and microwave test systems, while the 525 MHz to 625 MHz divided output can serve lower-frequency signal chains.
For PCB implementation, use an exposed-pad land pattern with adequate thermal-via density and place the reference and loop-filter components close to their associated pins. High-frequency routing must minimize parasitic capacitance and inductance. The board should also provide clean supply and ground planes, because supply noise or unstable reference routing can degrade phase noise and PLL lock behavior.
This product page combines the manufacturer function description with package, interface, replacement, and design guidance for engineers evaluating the ADF4360-6BCPRL7. It also identifies the practical differences among pin-compatible ADF4360 frequency options so that a board can be reviewed for RF range, control firmware, and qualification requirements before substitution.
এর জন্য ড্রপ-ইন বিকল্প ADF4360-6BCPRL7 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ADF4360-6BCPRL7 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package Type, Device Type, Maximum RF Output Frequency.
ADF4360-1BCPRL7
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADF4360-4BCPZRL7
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADF4360-7BCPZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ADF4360-8BCPZRL
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ADF4360-6BCPRL7 বিশেষণ
| Device Type | Integer-N frequency synthesizer with integrated VCO |
| Maximum RF Output Frequency | 1.25 GHz |
| VCO Center Frequency | 1150 MHz |
| Divide-by-2 Output Range | 525 MHz to 625 MHz |
| Reference Input Range | 10 MHz to 250 MHz |
| Reference Input Count | 1 input |
| Number of RF Outputs | 2 outputs |
| Control Interface | Serial 3-wire interface |
| PLL Type | Integer-N PLL |
| VCO Type | Integrated voltage-controlled oscillator |
| Package Type | 24-lead LFCSP with exposed pad |
| Package Pin Count | 24 pins |
| মাউন্টিং টাইপ | Surface mount |
ADF4360-6BCPRL7 24 pins পিন কনফিগারেশন গাইড
ADF4360-6BCPRL7 (24 pins প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADF4360-6BCPRL7.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ADF4360-6BCPRL7 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: RF Transceiver Local Oscillator, Wireless Communication RF Signal Source, Frequency Conversion Subsystem, Industrial RF Test Instrumentation, RF Communication Test Bench, Clock and Timing Reference Generator.
RF Transceiver Local Oscillator
The ADF4360-6BCPRL7 can generate a programmable local-oscillator signal for an RF transceiver operating around the -6 device's frequency range. Its integrated integer-N PLL and 1150 MHz VCO center frequency support RF output up to 1.25 GHz, while the divide-by-2 path covers 525 MHz to 625 MHz. This integration reduces the number of discrete synthesis components required beside the transceiver. The design must provide a clean 10 MHz to 250 MHz reference and tune the loop filter for the intended channel spacing. PCB routing should keep the reference, loop filter, and RF output network compact because parasitic reactance can affect tuning range, phase noise, and spurious performance.
সুপারিশকৃত
Wireless Communication RF Signal Source
The ADF4360-6BCPRL7 is appropriate for programmable RF signal generation in wireless communication equipment when the required channel falls within the 1150 MHz center-frequency option or its divided-output range. The 1.25 GHz maximum RF output and 525 MHz to 625 MHz divide-by-2 output provide two useful frequency ranges from one integrated synthesizer. A microcontroller can use the serial control interface to configure the operating channel, although register settings and reference-divider values must match the selected frequency plan. Engineers should verify phase noise and spurious requirements for their modulation standard, then validate the exposed-pad thermal arrangement and RF return-loss performance on the final PCB.
সুপারিশকৃত
Frequency Conversion Subsystem
The ADF4360-6BCPRL7 can supply a programmable oscillator to a mixer-based frequency-conversion stage. Its RF output reaches 1.25 GHz, making it suitable for intermediate-frequency generation or local-oscillator service around the relevant -6 frequency band. The divided output between 525 MHz and 625 MHz offers an additional choice for lower-frequency conversion architectures. Integration reduces assembly area and simplifies synchronization compared with a discrete VCO and divider arrangement. The reference source must remain low-noise and stable, while the loop bandwidth should be selected to balance lock time against phase noise. RF output matching and return loss need measurement on the finished board because package and routing parasitics influence converter performance.
সুপারিশকৃত
Industrial RF Test Instrumentation
The ADF4360-6BCPRL7 is useful in programmable industrial RF test equipment that requires a compact synthesized RF source. The serial control interface allows an embedded controller to select operating parameters, while the integrated integer-N PLL and VCO consolidate functions that otherwise require multiple RF modules. Output capability up to 1.25 GHz and the 525 MHz to 625 MHz divided range support signal generation around the -6 band. For laboratory and production-test equipment, reference phase noise, frequency accuracy, lock time, and spur performance are especially important. Validate those characteristics with the final reference and loop-filter implementation, and provide the exposed pad with a thermal path suitable for the expected ambient temperature and duty cycle.
সুপারিশকৃত
RF Communication Test Bench
The ADF4360-6BCPRL7 can act as a programmable source in a communication test bench that exercises receivers, demodulators, and frequency-conversion blocks. Its 1.25 GHz maximum output provides coverage for the -6 family's upper operating region, and the divide-by-2 output from 525 MHz to 625 MHz supports tests requiring lower-frequency excitation. A host processor can configure the device through its serial interface, making channel changes straightforward when the reference and divider plan are designed correctly. The implementation should use short, impedance-controlled RF traces, a stable reference distribution network, and a loop filter located close to the synthesizer pins. Confirm amplitude accuracy and unwanted-signal performance at the equipment interface after adding any external attenuators or amplifiers.
সুপারিশকৃত
Clock and Timing Reference Generator
The ADF4360-6BCPRL7 can also provide a programmable clock-related RF reference in systems that derive multiple synchronized frequencies. Its integer-N architecture and 1150 MHz VCO center frequency allow the output to be set within the appropriate family band, while the divided path offers lower-frequency outputs between 525 MHz and 625 MHz. The compact 24-lead LFCSP is useful where board area is constrained, but high-frequency clock distribution still requires controlled impedance and return paths. Power and ground planes must provide low-impedance connections to the exposed pad, and the device's reference input should be isolated from noisy digital activity. Firmware and board validation should include lock-time measurements, output stability, and temperature-correlated frequency behavior.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADF4360-6BCPRL7 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADF4360-1BCPRL7 | ADF4360-4BCPZRL7 | ADF4360-7BCPZ | ADF4360-8BCPZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad |
| Product Type | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Mounting Method | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
মূল পার্থক্যসমূহ
- Targeted -6 frequency option (বনামADF4360-4BCPZRL7)
- Integrated dual-range RF output arrangement (বনামADF4360-1BCPRL7)
- Exact -6 ordering configuration for RF channel plans (বনামADF4360-7BCPZ)
- Shared 24-lead family footprint enables controlled redesign work (বনামADF4360-8BCPZ)
ডিজাইন নোট
Use the Analog Devices land pattern for the 24-lead LFCSP and provide the exposed pad with the recommended thermal-via arrangement. Place the device near its reference, loop-filter, and RF output networks to minimize parasitic inductance. Keep the exposed-pad connection continuous and avoid placing noisy digital return paths beneath the package. A compact implementation is especially important because loop stability, phase noise, and output matching can change as trace and via parasitics increase.
Treat the reference input as a high-quality RF signal even though it accepts 10 MHz to 250 MHz. Use a short, impedance-controlled route from the reference source, keep the loop-filter components close to their pins, and avoid crossing the reference trace with digital clock or switching-node routes. Confirm lock behavior across the required temperature and supply ranges. This is particularly important because the ADF4360-6 output derives from a comparison between the divided feedback and the reference signal.
Do not select a replacement solely because its package matches. ADF4360-1, -4, -7, and -8 options use the same family footprint but represent different VCO frequency choices. Verify the target channel range, divide-by-2 output, reference-divider ratio, loop-filter constants, register settings, and register compatibility. The -4 option is listed as a 1.75 GHz device, while the target -6 device has a 1150 MHz center frequency, so an unverified substitution can produce an unusable RF output.
The exposed pad is the primary heat-dissipation path for this surface-mount frequency synthesizer. Use the manufacturer's exposed-pad geometry and thermal-via pattern, and ensure the board provides sufficient copper without creating unwanted voids during reflow. Validate operating temperature under the highest expected RF-output duty cycle. Keep thermal and return-current paths separate from sensitive reference routing so that heating of the PCB does not disturb the reference network.
কমপ্লায়েন্স তথ্য
The exact part is identified as a 24-lead lead-free chip-scale package with exposed pad. Specific RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product documentation.