Analog Devices

ADF4360-6BCPRL7 - 1.25 GHz RF Synthesizer | Analog Devices

部品番号: ADF4360-6BCPRL7 ✓ 生産中
24-lead LFCSP with exposed pad Package 1.25 GHz Speed
MOQ: 1 |

ADF4360-6BCPRL7 概要

The Analog Devices ADF4360-6BCPRL7 is an integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 1.25 GHz output, a 1150 MHz center frequency, and a 24-lead lead-free chip-scale package with exposed pad. Its reference input accepts signals from 10 MHz to 250 MHz, while the available divide-by-2 output covers 525 MHz to 625 MHz. The device is intended for RF signal generation, clocking, and frequency conversion systems requiring a compact local oscillator.

An integer-N synthesizer generates an output frequency by comparing the divided feedback signal with a reference frequency. In the broader semiconductor hierarchy, the ADF4360-6 is a clock and timing IC, then a frequency synthesizer, then an integer-N PLL with an integrated VCO. This integrated approach combines phase locking, frequency division, and RF generation in one package, reducing the number of separate RF components required in a radio or test-equipment design.

Key features include a 1150 MHz VCO center frequency, RF output capability extending to 1.25 GHz, and an optional divide-by-2 output between 525 MHz and 625 MHz. Its reference input range of 10 MHz to 250 MHz supports common external reference sources. The 24-WFQFN exposed-pad construction provides a compact surface-mount footprint and a direct thermal path into the PCB when its exposed pad is properly soldered.

The internal architecture uses integer-N feedback to multiply a reference frequency into the required RF output. The synthesizer supports programmable frequency control through a serial interface, allowing the system controller to set the operating channel. Because the VCO is integrated, the external RF network is simpler than a discrete oscillator arrangement, although loop-filter, reference, decoupling, and output-matching layouts remain critical at high frequencies.

Typical applications include RF transceiver local-oscillator generation, wireless communication equipment, frequency conversion blocks, industrial RF test equipment, and instrumentation requiring programmable RF outputs. The 1.25 GHz output is particularly relevant to RF communications and microwave test systems, while the 525 MHz to 625 MHz divided output can serve lower-frequency signal chains.

For PCB implementation, use an exposed-pad land pattern with adequate thermal-via density and place the reference and loop-filter components close to their associated pins. High-frequency routing must minimize parasitic capacitance and inductance. The board should also provide clean supply and ground planes, because supply noise or unstable reference routing can degrade phase noise and PLL lock behavior.

This product page combines the manufacturer function description with package, interface, replacement, and design guidance for engineers evaluating the ADF4360-6BCPRL7. It also identifies the practical differences among pin-compatible ADF4360 frequency options so that a board can be reviewed for RF range, control firmware, and qualification requirements before substitution.

ドロップイン代替品: ADF4360-6BCPRL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADF4360-6BCPRL7 (同一形状・フットプリント) — 相違点: Package Type, Device Type, Maximum RF Output Frequency.

Analog Devices
Package Type: WFQFN exposed-pad CSP
比較対象 ADF4360-6BCPRL7 →
Analog Devices
Package Type: 24-WFQFN exposed-pad CSP
Device Type: Integer-N frequency synthesizer and VCO
Maximum RF Output Frequency: 400 MHz
比較対象 ADF4360-6BCPRL7 →

ADF4360-1BCPRL7

✅ ドロップイン
📦 24-WFQFN Exposed Pad
Same 24-lead footprint and pin functions, but the -1 VCO band differs from the -6 1150 MHz band, requiring RF-range validation

📋 参考代替品(カタログ未掲載)

ADF4360-4BCPZRL7

✅ ドロップイン
📦 24-WFQFN Exposed Pad
Same 24-lead footprint and pin functions, but the listed 1.75 GHz -4 frequency option differs from the -6 1150 MHz center frequency

📋 参考代替品(カタログ未掲載)

ADF4360-7BCPZ

✅ ドロップイン
Analog Devices
📦 24-WFQFN Exposed Pad
Integer-N frequency synthesizer with integrated VCO · Analog Devices · 350 MHz to 1800 MHz · 175 MHz to 900 MHz · 1800 MHz · 3.0 V to 3.6 V · 3.6 V · 1.8 V

価格はお問い合わせください

データシートを見る →

ADF4360-8BCPZRL

✅ ドロップイン
Analog Devices
📦 24-WFQFN Exposed Pad
Integer-N frequency synthesizer and VCO · 65 MHz to 400 MHz · 400 MHz · 3.0 V to 3.6 V · 3-wire · Set by external inductors · Supported · 24-lead LFCSP with exposed pad

価格はお問い合わせください

データシートを見る →

ADF4360-6BCPRL7 仕様

Device Type Integer-N frequency synthesizer with integrated VCO
Maximum RF Output Frequency 1.25 GHz
VCO Center Frequency 1150 MHz
Divide-by-2 Output Range 525 MHz to 625 MHz
Reference Input Range 10 MHz to 250 MHz
Reference Input Count 1 input
Number of RF Outputs 2 outputs
Control Interface Serial 3-wire interface
PLL Type Integer-N PLL
VCO Type Integrated voltage-controlled oscillator
Package Type 24-lead LFCSP with exposed pad
Package Pin Count 24 pins
実装タイプ Surface mount

ADF4360-6BCPRL7 24 pins ピン配置ガイド

ADF4360-6BCPRL7 (24 pins パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADF4360-6BCPRL7 の 24 pins パッケージピン配置図

詳細なピン配置データはありません: ADF4360-6BCPRL7.

詳細は データシート をご参照ください。

主な用途

ADF4360-6BCPRL7 の用途: 6 件s: RF Transceiver Local Oscillator, Wireless Communication RF Signal Source, Frequency Conversion Subsystem, Industrial RF Test Instrumentation, RF Communication Test Bench, Clock and Timing Reference Generator.

🌐

RF Transceiver Local Oscillator

The ADF4360-6BCPRL7 can generate a programmable local-oscillator signal for an RF transceiver operating around the -6 device's frequency range. Its integrated integer-N PLL and 1150 MHz VCO center frequency support RF output up to 1.25 GHz, while the divide-by-2 path covers 525 MHz to 625 MHz. This integration reduces the number of discrete synthesis components required beside the transceiver. The design must provide a clean 10 MHz to 250 MHz reference and tune the loop filter for the intended channel spacing. PCB routing should keep the reference, loop filter, and RF output network compact because parasitic reactance can affect tuning range, phase noise, and spurious performance.

📱

Wireless Communication RF Signal Source

The ADF4360-6BCPRL7 is appropriate for programmable RF signal generation in wireless communication equipment when the required channel falls within the 1150 MHz center-frequency option or its divided-output range. The 1.25 GHz maximum RF output and 525 MHz to 625 MHz divide-by-2 output provide two useful frequency ranges from one integrated synthesizer. A microcontroller can use the serial control interface to configure the operating channel, although register settings and reference-divider values must match the selected frequency plan. Engineers should verify phase noise and spurious requirements for their modulation standard, then validate the exposed-pad thermal arrangement and RF return-loss performance on the final PCB.

🔧

Frequency Conversion Subsystem

The ADF4360-6BCPRL7 can supply a programmable oscillator to a mixer-based frequency-conversion stage. Its RF output reaches 1.25 GHz, making it suitable for intermediate-frequency generation or local-oscillator service around the relevant -6 frequency band. The divided output between 525 MHz and 625 MHz offers an additional choice for lower-frequency conversion architectures. Integration reduces assembly area and simplifies synchronization compared with a discrete VCO and divider arrangement. The reference source must remain low-noise and stable, while the loop bandwidth should be selected to balance lock time against phase noise. RF output matching and return loss need measurement on the finished board because package and routing parasitics influence converter performance.

🏭

Industrial RF Test Instrumentation

The ADF4360-6BCPRL7 is useful in programmable industrial RF test equipment that requires a compact synthesized RF source. The serial control interface allows an embedded controller to select operating parameters, while the integrated integer-N PLL and VCO consolidate functions that otherwise require multiple RF modules. Output capability up to 1.25 GHz and the 525 MHz to 625 MHz divided range support signal generation around the -6 band. For laboratory and production-test equipment, reference phase noise, frequency accuracy, lock time, and spur performance are especially important. Validate those characteristics with the final reference and loop-filter implementation, and provide the exposed pad with a thermal path suitable for the expected ambient temperature and duty cycle.

📡

RF Communication Test Bench

The ADF4360-6BCPRL7 can act as a programmable source in a communication test bench that exercises receivers, demodulators, and frequency-conversion blocks. Its 1.25 GHz maximum output provides coverage for the -6 family's upper operating region, and the divide-by-2 output from 525 MHz to 625 MHz supports tests requiring lower-frequency excitation. A host processor can configure the device through its serial interface, making channel changes straightforward when the reference and divider plan are designed correctly. The implementation should use short, impedance-controlled RF traces, a stable reference distribution network, and a loop filter located close to the synthesizer pins. Confirm amplitude accuracy and unwanted-signal performance at the equipment interface after adding any external attenuators or amplifiers.

🖥️

Clock and Timing Reference Generator

The ADF4360-6BCPRL7 can also provide a programmable clock-related RF reference in systems that derive multiple synchronized frequencies. Its integer-N architecture and 1150 MHz VCO center frequency allow the output to be set within the appropriate family band, while the divided path offers lower-frequency outputs between 525 MHz and 625 MHz. The compact 24-lead LFCSP is useful where board area is constrained, but high-frequency clock distribution still requires controlled impedance and return paths. Power and ground planes must provide low-impedance connections to the exposed pad, and the device's reference input should be isolated from noisy digital activity. Firmware and board validation should include lock-time measurements, output stability, and temperature-correlated frequency behavior.

What is the ADF4360-6BCPRL7?
The ADF4360-6BCPRL7 is an integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. According to the Analog Devices ADF4360-6 datasheet, it has a 1150 MHz VCO center frequency, supports output up to 1.25 GHz, and provides a divide-by-2 output from 525 MHz to 625 MHz. It is packaged in a 24-lead LFCSP with an exposed pad for compact RF and timing designs.
What are the key specifications of ADF4360-6BCPRL7 that engineers should know?
The ADF4360-6BCPRL7 combines an integer-N PLL, an integrated VCO, and programmable RF outputs in a 24-lead LFCSP. The Analog Devices datasheet identifies a 1150 MHz center frequency, an output range reaching 1.25 GHz, and a divided output of 525 MHz to 625 MHz. Its reference input accepts 10 MHz to 250 MHz, while serial control permits frequency and divider programming from the host controller.
Where can I download the ADF4360-6BCPRL7 datasheet PDF?
The official ADF4360-6BCPRL7 datasheet PDF is available from the Analog Devices product-document link on this page. The manufacturer datasheet describes the integrated integer-N synthesizer, the 1150 MHz VCO, the 1.25 GHz maximum output, the 525 MHz to 625 MHz divided-output range, and the 10 MHz to 250 MHz reference-input range. Use the manufacturer document for final pin, electrical, and layout requirements.
Where can I find the ADF4360-6BCPRL7 pinout?
The ADF4360-6BCPRL7 pinout is shown in the pin-description table of the Analog Devices ADF4360-6 datasheet. The device uses a 24-lead LFCSP with an exposed pad, so PCB layout must include the thermal land and the manufacturer-recommended thermal-via arrangement. The exposed pad is not a substitute for a numbered signal pin and must be connected according to the device's recommended layout and grounding scheme.
What reference frequency can ADF4360-6BCPRL7 use?
The ADF4360-6BCPRL7 accepts a reference input from 10 MHz to 250 MHz. This range is identified for the exact 24-lead LFCSP device in the Analog Devices product information. Select a clean, low-phase-noise reference close to the intended frequency plan, and account for divider ratios, loop bandwidth, and multiplication factors when determining the required synthesizer configuration.
What output frequencies does ADF4360-6BCPRL7 provide?
The ADF4360-6BCPRL7 supports an RF output up to 1.25 GHz and has a 1150 MHz VCO center frequency. According to the Analog Devices datasheet, selecting the divide-by-2 path produces an output from 525 MHz to 625 MHz. The programmable output arrangement therefore supports both higher-frequency RF chains and lower-frequency divided-output applications.
ADF4360-6BCPRL7 vs ADF4360-7BCPZ - which is better for a 1.25 GHz design?
The ADF4360-6BCPRL7 is the more direct choice when the design is centered on the ADF4360-6 band and uses a 1150 MHz VCO center frequency with output capability up to 1.25 GHz. The ADF4360-7BCPZ belongs to a different frequency option in the same family, so its programmed operating band must be checked. According to the Analog Devices family information, both retain the same 24-lead package family, but the RF range differs.
ADF4360-6BCPRL7 vs ADF4360-4BCPZRL7 - what is the difference?
The ADF4360-6BCPRL7 and ADF4360-4BCPZRL7 occupy the same ADF4360 family and use the same 24-lead package family, but their VCO frequency options differ. The Analog Devices listings identify the -4 device as a 1.75 GHz option and the -6 as a 1150 MHz center-frequency option. Pin compatibility therefore does not make them frequency-equivalent; the required RF range must match before substitution.
When should I choose ADF4360-6BCPRL7 over another ADF4360 frequency option?
Choose the ADF4360-6BCPRL7 when the RF plan specifically requires the -6 frequency option, particularly around its 1150 MHz VCO center and 1.25 GHz maximum output. Select another family member when the desired band falls outside that range. Because these devices share a package family, the choice should be based on frequency coverage, divider requirements, reference plan, phase-noise target, and application qualification rather than footprint alone.
Is ADF4360-6BCPRL7 suitable for RF transceiver local oscillators?
Yes, the ADF4360-6BCPRL7 is suitable for RF transceiver local-oscillator generation when the required channel plan falls within its frequency capability. Its integrated integer-N PLL and VCO support programmable RF output up to 1.25 GHz, with an available 525 MHz to 625 MHz divided range. Confirm phase noise, tuning range, spur performance, reference quality, and loop-filter requirements against the manufacturer datasheet before sign-off.
What can replace ADF4360-6BCPRL7?
The closest replacements are other pin-compatible ADF4360 frequency options, but every candidate must be checked against the target RF range and register requirements. ADF4360-1BCPRL7, ADF4360-4BCPZRL7, ADF4360-7BCPZ, and ADF4360-8BCPZ retain the family footprint, while their frequency options differ from the -6 device. A footprint-compatible substitute should not be treated as functionally identical without RF-band validation.
Is ADF4360-7BCPZRL7 the same as ADF4360-6BCPRL7?
No. The ADF4360-7BCPZRL7 and ADF4360-6BCPRL7 share the ADF4360 family package style, but they represent different VCO frequency options. The -6 device is designed around a 1150 MHz center frequency and supports output up to 1.25 GHz, whereas the -7 option targets a different band. Use the manufacturer family documentation to confirm the operating range, dividers, and tuning behavior before considering a substitution.
Where can I buy ADF4360-6BCPRL7 online?
Use the Request a Quote form on this page to request the exact ADF4360-6BCPRL7 ordering code and current commercial terms. The exact orderable part includes the LFCSP package and reel-oriented suffix, so confirm the full MPN on the quotation and purchase order. The manufacturer datasheet identifies the device as a 24-lead LFCSP with exposed pad, which helps prevent package substitution.
What is the price of ADF4360-6BCPRL7?
Current commercial terms for the ADF4360-6BCPRL7 are available through the Request a Quote form on this page. The quote should identify the exact 24-lead LFCSP ordering code, reel packaging, quantity, and requested delivery schedule. Review the confirmed line on the quotation rather than relying on a family-level or abbreviated synthesizer listing, because different frequency options and package suffixes are not commercially equivalent.
What is the lead time and stock status for ADF4360-6BCPRL7?
Request the current stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The ordering code ADF4360-6BCPRL7 identifies the -6 frequency option in the 24-lead LFCSP family, and the quotation should confirm that exact configuration. This avoids confusion with -1, -4, -7, or -8 frequency options that may have different production or supply characteristics.

エンジニアリング参考データ: ADF4360-6BCPRL7 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADF4360-6BCPRL7 when the RF architecture requires the -6 frequency option, a 1150 MHz VCO center frequency, output capability up to 1.25 GHz, or the defined 525 MHz to 625 MHz divided-output range. Its integrated integer-N PLL and VCO are useful when board area and assembly simplicity matter. ADF4360-1BCPRL7 may fit a different band of the same family, while ADF4360-4BCPZRL7 is listed as a 1.75 GHz option. Consider ADF4360-7BCPZ when the desired channel plan requires that frequency choice, and ADF4360-8BCPZ when its band matches the system. A shared 24-lead package simplifies mechanical reuse, but it does not prove functional interchangeability. Before substitution, verify output range, divider architecture, reference-divider settings, loop-filter values, register compatibility, phase noise, spur performance, thermal conditions, and application qualification.

代替品との比較

パラメータ この製品 ADF4360-1BCPRL7 ADF4360-4BCPZRL7 ADF4360-7BCPZ ADF4360-8BCPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad
Product Type Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO
Mounting Method Surface mount Surface mount Surface mount Surface mount Surface mount

主な差別化要因

  • Targeted -6 frequency option (vs ADF4360-4BCPZRL7)
  • Integrated dual-range RF output arrangement (vs ADF4360-1BCPRL7)
  • Exact -6 ordering configuration for RF channel plans (vs ADF4360-7BCPZ)
  • Shared 24-lead family footprint enables controlled redesign work (vs ADF4360-8BCPZ)

設計ノート

Use the Analog Devices land pattern for the 24-lead LFCSP and provide the exposed pad with the recommended thermal-via arrangement. Place the device near its reference, loop-filter, and RF output networks to minimize parasitic inductance. Keep the exposed-pad connection continuous and avoid placing noisy digital return paths beneath the package. A compact implementation is especially important because loop stability, phase noise, and output matching can change as trace and via parasitics increase.

Treat the reference input as a high-quality RF signal even though it accepts 10 MHz to 250 MHz. Use a short, impedance-controlled route from the reference source, keep the loop-filter components close to their pins, and avoid crossing the reference trace with digital clock or switching-node routes. Confirm lock behavior across the required temperature and supply ranges. This is particularly important because the ADF4360-6 output derives from a comparison between the divided feedback and the reference signal.

Do not select a replacement solely because its package matches. ADF4360-1, -4, -7, and -8 options use the same family footprint but represent different VCO frequency choices. Verify the target channel range, divide-by-2 output, reference-divider ratio, loop-filter constants, register settings, and register compatibility. The -4 option is listed as a 1.75 GHz device, while the target -6 device has a 1150 MHz center frequency, so an unverified substitution can produce an unusable RF output.

The exposed pad is the primary heat-dissipation path for this surface-mount frequency synthesizer. Use the manufacturer's exposed-pad geometry and thermal-via pattern, and ensure the board provides sufficient copper without creating unwanted voids during reflow. Validate operating temperature under the highest expected RF-output duty cycle. Keep thermal and return-current paths separate from sensitive reference routing so that heating of the PCB does not disturb the reference network.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact part is identified as a 24-lead lead-free chip-scale package with exposed pad. Specific RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product documentation.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-6BCPRL7 datasheet ADF4360-6BCPRL7 pinout ADF4360-6BCPRL7 datasheet pdf ADF4360-6BCPRL7 equivalent ADF4360-6BCPRL7 replacement ADF4360-6BCPRL7 cross reference ADF4360-6BCPRL7 vs ADF4360-7BCPZ ADF4360-6BCPRL7 footprint ADF4360-6BCPRL7 application circuit Analog Devices ADF4360-6BCPRL7 ADF4360-6BCPRL7 price ADF4360-6BCPRL7 stock

関連部品&用語

Analog Devices ADF4360-6BCPRL7 ADF4360-6BCPZRL7 ADF4360-1BCPRL7 ADF4360-4BCPZRL7 ADF4360-7BCPZ ADF4360-7BCPZRL7 ADF4360-8BCPZ integer-N synthesizer frequency synthesizer phase-locked loop PLL voltage-controlled oscillator VCO clock and timing IC RF local oscillator frequency conversion LFCSP-24 WFQFN-24 QFN family surface-mount package exposed pad reference input frequency divide-by-2 output phase noise
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示