Analog Devices

ADM208EARZ - 4/4 RS-232 Transceiver, 230 kbps | Analog Devices

MPN: ADM208EARZ ✓ সক্রিয়
4.5 V to 5.5 V Vdss 13 mA Id EIA-232E and V.28 Rds(on) 24-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADM208EARZ সারাংশ

The Analog Devices ADM208EARZ is a four-driver, four-receiver RS-232 transceiver designed for single-supply EIA-232 and V.28 communications interfaces. It operates from a 4.5 V to 5.5 V supply, supports data rates up to 230 kbps, and is packaged in a 24-pin SOIC. The device uses CMOS-compatible 0.1 µF charge-pump capacitors for operation from a single +5 V rail.

An RS-232 transceiver is an interface IC that converts logic-level signals into differential voltage levels for transmission and converts received RS-232 signals back into logic-compatible levels. In the product hierarchy, the ADM208EARZ belongs to the RS-232 interface transceiver class within interface ICs and broader data-communication semiconductors. Its four transmitters and four receivers support multiple point-to-point serial links in one package, reducing board area compared with separate line-driver and receiver devices.

The ADM208 family is specified for harsh electrical environments and operates at rates up to 230 kbps. According to Analog Devices, the devices fully conform to EIA-232E and V.28 specifications. The ADM208EARZ also provides ±15 kV ESD protection, making it appropriate for industrial equipment and external serial ports where electrostatic discharge is a practical concern. A Schmitt-trigger receiver helps improve noise immunity when signals arrive with slow or noisy transitions.

The charge-pump architecture generates the positive and negative voltage levels required by RS-232 without a dual supply. A 0.1 µF capacitor is specified for the charge-pump circuit, while the standard 5 V interface rail requires normal supply bypassing. Because the charge-pump switching action can introduce ripple, careful component selection and placement around the ADM208EARZ remain important when connecting external cables.

Typical uses include industrial serial controllers, point-of-sale terminals, data-acquisition equipment, test systems, and embedded products that need to communicate with legacy RS-232 peripherals. Four driver and receiver channels make the device useful for multiport equipment, custom service interfaces, and systems that combine data transmission and reception on one board.

For PCB design, place the charge-pump capacitor and supply-decoupling capacitors close to their associated pins. Keep the RS-232 driver outputs away from sensitive receiver inputs and reduce trace length where practical. Confirm signal polarity, grounding, and cable-side protection because logic-level standards and RS-232 voltage conventions differ at the host interface.

This page combines the ADM208EARZ device specifications, package and commercial information, verified drop-in references, parameter comparisons, and practical PCB guidance to help engineers evaluate the transceiver before integrating it into a single-supply RS-232 design.

এর জন্য ড্রপ-ইন বিকল্প ADM208EARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADM208EARZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Maximum Data Rate, Package.

Analog Devices
Maximum Data Rate: 200 kbps
Package: 24-lead SOIC
এর সাথে তুলনা করুন ADM208EARZ →

ADM208EAR

✅ ড্রপ-ইন
Analog Devices
📦 24-pin SOIC
RS-232 transceiver · 4 drivers · 4 receivers · 5 V · 200 kbps · 0.1 µF · RS-232 · EIA-232 and CCITT V.28

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

HIN208EIAZ-T

✅ ড্রপ-ইন
📦 24-pin SOIC
Complete 24-pin SOIC replacement with the same 4/4 RS-232 configuration and 230 kbps class; identified data-rate and channel-count differences are 0%.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM208EARZ বিশেষণ

Product Type RS-232 transceiver
Transmitter Channels 4
Receiver Channels 4
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage +5 V
Maximum Data Rate 230 kbps
Charge-Pump Capacitor 0.1 µF
Maximum Supply Current 13 mA
ESD Protection ±15 kV
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
প্যাকেজ 24-pin SOIC
Interface Standards EIA-232E and V.28
Input Logic Type Schmitt-trigger receiver
Logic Technology CMOS
মাউন্টিং টাইপ Surface mount
লাইফসাইকেল স্ট্যাটাস Production

ADM208EARZ 24-pin soic পিন কনফিগারেশন গাইড

ADM208EARZ (24-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADM208EARZ-এর জন্য 24-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM208EARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADM208EARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Controllers, Point-of-Sale Terminals, Data-Acquisition Equipment, Legacy Peripheral Interfaces, Test and Measurement Systems, Multiport Communication Equipment.

🏭

Industrial Serial Controllers

The ADM208EARZ fits industrial control equipment that must expose legacy RS-232 ports while operating from a single 5 V rail. Four drivers and four receivers allow several channels to share one interface IC, reducing component count and board area. Its specified -40 °C to +85 °C operating range and ±15 kV ESD protection are useful around exposed service connectors. Designers should place the 0.1 µF charge-pump capacitor and supply bypass close to the device, then verify the ground strategy between logic and cable-side circuitry.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals often retain RS-232 connections to scales, printers, readers, and service equipment. The ADM208EARZ provides four transmit and four receive channels in one 24-pin SOIC, which is useful when a terminal consolidates several peripheral ports. Its 230 kbps maximum data rate is more than adequate for typical command and receipt traffic, while single +5 V operation simplifies the interface power budget. Cable protection and signal routing remain important because external accessories can expose the board to ESD events.

📟

Data-Acquisition Equipment

The ADM208EARZ is appropriate for data-acquisition instruments that need several RS-232 control and monitoring channels without multiple interface packages. Four receivers can collect status signals from external equipment, while four drivers can command devices such as relays, fixtures, or legacy instruments. The transceiver supports rates up to 230 kbps, making it suitable for configuration traffic rather than continuous high-bandwidth sensor streaming. Engineers should separate logic-side routing from connector-side nets and validate cable grounding for reliable industrial operation.

🔧

Legacy Peripheral Interfaces

The ADM208EARZ allows modern control logic to communicate with legacy RS-232 printers, programmers, scanners, and service equipment. Its four-driver, four-receiver organization supports multiple peripheral roles from one package, and the Schmitt-trigger receiver improves recognition of slowly changing or noisy inputs. Operation from 4.5 V to 5.5 V is convenient for established 5 V embedded platforms. Before layout release, confirm logic polarity and the meaning of RS-232 assertion levels because a logic-high output does not necessarily represent the same asserted state as the opposite logic convention.

🔬

Test and Measurement Systems

The ADM208EARZ can serve as the multiport RS-232 interface in test and measurement systems that communicate with older bench instruments. Four drivers and four receivers provide a practical balance between multiport capability and package count, while the 230 kbps rate suits command, status, and measurement-result transfers. The -40 °C to +85 °C range supports use across industrial and laboratory temperature conditions. Keep switching or high-energy circuits away from the RS-232 traces, and use a defined chassis or signal-ground strategy to prevent ground currents from disturbing measurements.

🌐

Multiport Communication Equipment

The ADM208EARZ is well suited to communication equipment that needs multiple RS-232 ports in a restricted PCB area. Four transmitter and four receiver channels consolidate eight line functions into one 24-pin SOIC, allowing a controller to bridge several downstream devices. The single +5 V architecture simplifies power design, and the 0.1 µF charge-pump capacitor requirement supports straightforward implementation. Because charge-pump energy is present during operation, route sensitive signals away from the capacitor and maintain short return paths to achieve reliable electromagnetic compatibility.

What is the ADM208EARZ?
The ADM208EARZ is a four-driver, four-receiver RS-232 transceiver from Analog Devices for single-supply serial-interface designs. According to the Analog Devices ADM208 product page, it operates from a +5 V supply, supports rates up to 230 kbps, uses 0.1 µF charge-pump capacitors, and is available in a 24-pin SOIC package.
What is the operating voltage of ADM208EARZ?
The ADM208EARZ operates from a 4.5 V to 5.5 V supply. The manufacturer identifies the ADM208 family as a CMOS RS-232 transceiver designed for single +5 V operation. This supply range places the device in the conventional 5 V interface category, so a 3.3 V-only system requires a suitable level-shifting or supply solution.
How many RS-232 drivers and receivers does ADM208EARZ contain?
The ADM208EARZ contains four RS-232 drivers and four RS-232 receivers in one package. The DigiKey product listing identifies it as a 4/4 full RS-232 transceiver, while the Analog Devices product page describes the ADM208 family as a four-driver, four-receiver implementation. It is therefore suitable for several communication channels or mixed transmit-and-receive ports.
What is the maximum data rate of ADM208EARZ?
The ADM208EARZ supports data rates up to 230 kbps. Analog Devices states that the ADM208E family operates at rates up to 230 kbps and fully conforms to the EIA-232E and V.28 specifications. This rate is suitable for conventional serial-control, point-of-sale, and legacy peripheral interfaces rather than high-speed differential data links.
Where can I download the ADM208EARZ datasheet PDF?
The official Analog Devices ADM208 product page provides the manufacturer documentation for the ADM208EARZ and related family members. It identifies the data sheet as Revision D and links the device documentation. For an exact ADM208EARZ revision, use the product page and select the specific orderable part before releasing the PDF to the manufacturing team.
Where can I find the ADM208EARZ pinout?
The ADM208EARZ pinout is published in the Analog Devices ADM208 family data sheet on the official ADM208 product page. The package is a 24-pin SOIC, and engineers should use the pin-description table and package drawing when assigning power, ground, charge-pump capacitor, receiver, and driver nets. Do not infer the pin functions from another SOIC transceiver.
Is ADM208EARZ suitable for industrial RS-232 equipment?
The ADM208EARZ is suitable for industrial RS-232 interfaces within its specified operating limits. The manufacturer describes the ADM2xxE family as robust devices for harsh electrical environments, while the published operating range is -40 °C to +85 °C. Its ±15 kV ESD protection also helps protect the interface when an exposed cable receives electrostatic discharge.
What does the Schmitt-trigger receiver in ADM208EARZ provide?
The ADM208EARZ uses Schmitt-trigger receiver inputs to improve tolerance of slowly changing or noisy signals. According to the ADM208EARZ technical description, this hysteresis helps the receiver recognize a valid logic transition cleanly rather than repeatedly switching near the threshold. The benefit is particularly useful with long cables, connector transitions, and electrically noisy industrial environments.
What is the best drop-in replacement for ADM208EARZ?
The ADM208EAR is the closest same-manufacturer drop-in candidate identified for the ADM208EARZ because both are four-driver, four-receiver devices in 24-pin SOIC packages with matching RS-232 interface ratings. The HIN208EIAZ-T from Renesas is a cross-brand 24-pin option described as completely replaceable. Verify the exact ordering code and production status before approving a substitution.
Can HIN208EIAZ-T replace ADM208EARZ without PCB changes?
The HIN208EIAZ-T can be considered a pin-compatible replacement for the ADM208EARZ because it is described as a complete replacement with the same terminals, 24-pin SOIC package, and equivalent RS-232 transceiver performance. Both support 230 kbps operation in the 5 V class. Final qualification should still verify supply limits, disable-control behavior, and every individual pin against current datasheets.
What is the difference between ADM208EARZ and ADM208EAR?
The ADM208EARZ and ADM208EAR are both Analog Devices 4/4 RS-232 transceivers in 24-pin SOIC packages and are listed as 230 kbps-class devices. The available ordering information identifies both as the same core device family, but package-ordering details should be checked on the manufacturer page. The Z suffix commonly denotes the lead-free ordering option, although the purchasing code must be confirmed.
When should I choose ADM208EARZ over a one-channel RS-232 transceiver?
Choose the ADM208EARZ when a design needs several RS-232 channels, compact PCB area, and a single 5 V interface supply. Its four transmitters and four receivers consolidate eight line-driver or receiver functions into one 24-pin SOIC. A one-channel device may be simpler for a single isolated port, but it requires additional packages when the system needs multiple channels.
Is ADM208EARZ suitable for high-speed data transfer?
The ADM208EARZ is rated for RS-232 data rates up to 230 kbps, making it appropriate for legacy serial ports, control links, and low-bandwidth instrumentation. It is not positioned as a high-speed LVDS, USB, or Ethernet transceiver. Designs requiring substantially greater throughput should use an interface explicitly specified for the required protocol and data rate.
How should the ADM208EARZ charge-pump capacitor be selected?
Use the 0.1 µF capacitor specified for the ADM208 family charge-pump function, with a package and voltage rating suitable for the implementation. Place the capacitor close to its designated pins and minimize loop area because charge-pump energy is transferred through this high-frequency path. Confirm the exact capacitor pin and polarity using the family pin-description table.
Where to buy ADM208EARZ online and what is its lead time?
Use the Request a Quote form on this page to ask for ADM208EARZ availability, MOQ, packaging, and current lead time. The manufacturer lists the ADM208 family as production, while channel inventory can change independently of product lifecycle. Request a written quotation for the exact 24-pin SOIC ordering code rather than relying on a generic RS-232 transceiver quotation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM208EARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADM208EARZ when a 5 V system needs several RS-232 channels in a compact package and requires data rates up to 230 kbps. Its four drivers and four receivers are especially useful in industrial controllers, test equipment, point-of-sale systems, and legacy peripheral interfaces. The ADM208EAR is the preferred same-manufacturer option when the exact ordering code and sourcing conditions are preferable, because it has the same 4/4 channel count, 24-pin SOIC footprint, and stated 230 kbps class. The HIN208EIAZ-T is appropriate when a cross-brand, pin-compatible second source is needed; it is described as a complete replacement with matching terminals and package. MAX3221IPWR is preferable for a single-port design because the ADM208EARZ adds channels that may otherwise remain unused. In every case, verify the current manufacturer pinout, shutdown or enable behavior, supply limits, and external cable protection before releasing a production design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADM208EAR HIN208EIAZ-T
Brand Analog Devices Analog Devices Renesas Electronics
Package 24-pin SOIC 24-pin SOIC - same 24-pin SOIC - same
Transmitter Channels 4 4 4
Receiver Channels 4 4 4
Maximum Data Rate 230 kbps 230 kbps 230 kbps

মূল পার্থক্যসমূহ

  • Four transmitters and four receivers in one package (বনামMAX3221IPWR)
  • Direct same-manufacturer ordering path (বনামHIN208EIAZ-T)
  • Single-supply RS-232 operation (বনামHIN208EIAZ-T)

ডিজাইন নোট

Place the specified 0.1 µF charge-pump capacitor directly between the pins identified in the ADM208 family pin-description table. Keep the loop area small because this capacitor carries high-frequency charge-pump current. Similarly, position the supply bypass capacitor close to the device's supply and ground pins. Short return paths reduce switching-node coupling into receiver inputs and improve conducted and radiated emissions.

Separate logic-side nets from connector-side RS-232 nets during floor planning. Driver outputs are high-voltage, bipolar signals, so they should not run beneath sensitive logic or analog traces. Where the PCB permits, place protection components near the connector and preserve a direct chassis or signal-ground return. Avoid long parallel runs between driver outputs and receiver inputs to reduce capacitive crosstalk.

Do not treat RS-232 logic polarity like ordinary TTL logic. Confirm the transmitter input polarity, receiver output polarity, and external connector signal names before finalizing firmware. Also verify that the host port can source or sink the required RS-232 levels. The ADM208EARZ converts between logic and RS-232 voltage domains, but it does not create a standards-compliant null modem arrangement by itself.

The charge-pump and line-driver transitions can create electromagnetic emissions, particularly when long external cables radiate high-frequency energy. Keep the charge-pump capacitor close to the IC, use a solid ground plane where appropriate, and provide connector-side filtering or protection appropriate to the target environment. Validate emissions with the finished cable and enclosure because board-only testing may not reproduce the installed system.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The ADM208 family is described as compliant with the EU EMC directive 89/336/EEC, but the exact ADM208EARZ RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADM208EARZ datasheet ADM208EARZ pinout ADM208EARZ datasheet pdf ADM208EARZ equivalent ADM208EARZ replacement ADM208EARZ cross reference ADM208EARZ vs HIN208EIAZ-T ADM208EARZ footprint ADM208EARZ 24 pin SOIC ADM208EARZ 230 kbps Analog Devices ADM208EARZ ADM208EARZ price ADM208EARZ stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADM208EARZ ADM208EAR HIN208EIAZ-T Renesas Electronics RS-232 transceiver RS-232 interface IC line driver line receiver EIA-232E V.28 CMOS charge-pump capacitor Schmitt trigger ESD protection 24-pin SOIC SOIC family surface-mount package single +5 V supply industrial control equipment point-of-sale terminal data-acquisition equipment legacy peripheral interface 230 kbps data rate
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন