ADM208EARZ - 4/4 RS-232 Transceiver, 230 kbps | Analog Devices
MPN: ADM208EARZ ✓ सक्रियADM208EARZ अवलोकन
An RS-232 transceiver is an interface IC that converts logic-level signals into differential voltage levels for transmission and converts received RS-232 signals back into logic-compatible levels. In the product hierarchy, the ADM208EARZ belongs to the RS-232 interface transceiver class within interface ICs and broader data-communication semiconductors. Its four transmitters and four receivers support multiple point-to-point serial links in one package, reducing board area compared with separate line-driver and receiver devices.
The ADM208 family is specified for harsh electrical environments and operates at rates up to 230 kbps. According to Analog Devices, the devices fully conform to EIA-232E and V.28 specifications. The ADM208EARZ also provides ±15 kV ESD protection, making it appropriate for industrial equipment and external serial ports where electrostatic discharge is a practical concern. A Schmitt-trigger receiver helps improve noise immunity when signals arrive with slow or noisy transitions.
The charge-pump architecture generates the positive and negative voltage levels required by RS-232 without a dual supply. A 0.1 µF capacitor is specified for the charge-pump circuit, while the standard 5 V interface rail requires normal supply bypassing. Because the charge-pump switching action can introduce ripple, careful component selection and placement around the ADM208EARZ remain important when connecting external cables.
Typical uses include industrial serial controllers, point-of-sale terminals, data-acquisition equipment, test systems, and embedded products that need to communicate with legacy RS-232 peripherals. Four driver and receiver channels make the device useful for multiport equipment, custom service interfaces, and systems that combine data transmission and reception on one board.
For PCB design, place the charge-pump capacitor and supply-decoupling capacitors close to their associated pins. Keep the RS-232 driver outputs away from sensitive receiver inputs and reduce trace length where practical. Confirm signal polarity, grounding, and cable-side protection because logic-level standards and RS-232 voltage conventions differ at the host interface.
This page combines the ADM208EARZ device specifications, package and commercial information, verified drop-in references, parameter comparisons, and practical PCB guidance to help engineers evaluate the transceiver before integrating it into a single-supply RS-232 design.
के लिए ड्रॉप-इन विकल्प ADM208EARZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADM208EARZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Maximum Data Rate, Package.
ADM208EAR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →HIN208EIAZ-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADM208EARZ विशेषताएं
| Product Type | RS-232 transceiver |
| Transmitter Channels | 4 |
| Receiver Channels | 4 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | +5 V |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Capacitor | 0.1 µF |
| Maximum Supply Current | 13 mA |
| ESD Protection | ±15 kV |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C |
| पैकेज | 24-pin SOIC |
| Interface Standards | EIA-232E and V.28 |
| Input Logic Type | Schmitt-trigger receiver |
| Logic Technology | CMOS |
| माउंटिंग प्रकार | Surface mount |
| लाइफसाइकिल स्थिति | Production |
ADM208EARZ 24-pin soic पिन कॉन्फ़िगरेशन गाइड
ADM208EARZ (24-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADM208EARZ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADM208EARZ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Serial Controllers, Point-of-Sale Terminals, Data-Acquisition Equipment, Legacy Peripheral Interfaces, Test and Measurement Systems, Multiport Communication Equipment.
Industrial Serial Controllers
The ADM208EARZ fits industrial control equipment that must expose legacy RS-232 ports while operating from a single 5 V rail. Four drivers and four receivers allow several channels to share one interface IC, reducing component count and board area. Its specified -40 °C to +85 °C operating range and ±15 kV ESD protection are useful around exposed service connectors. Designers should place the 0.1 µF charge-pump capacitor and supply bypass close to the device, then verify the ground strategy between logic and cable-side circuitry.
अनुशंसित
Point-of-Sale Terminals
Point-of-sale terminals often retain RS-232 connections to scales, printers, readers, and service equipment. The ADM208EARZ provides four transmit and four receive channels in one 24-pin SOIC, which is useful when a terminal consolidates several peripheral ports. Its 230 kbps maximum data rate is more than adequate for typical command and receipt traffic, while single +5 V operation simplifies the interface power budget. Cable protection and signal routing remain important because external accessories can expose the board to ESD events.
अनुशंसित
Data-Acquisition Equipment
The ADM208EARZ is appropriate for data-acquisition instruments that need several RS-232 control and monitoring channels without multiple interface packages. Four receivers can collect status signals from external equipment, while four drivers can command devices such as relays, fixtures, or legacy instruments. The transceiver supports rates up to 230 kbps, making it suitable for configuration traffic rather than continuous high-bandwidth sensor streaming. Engineers should separate logic-side routing from connector-side nets and validate cable grounding for reliable industrial operation.
अनुशंसित
Legacy Peripheral Interfaces
The ADM208EARZ allows modern control logic to communicate with legacy RS-232 printers, programmers, scanners, and service equipment. Its four-driver, four-receiver organization supports multiple peripheral roles from one package, and the Schmitt-trigger receiver improves recognition of slowly changing or noisy inputs. Operation from 4.5 V to 5.5 V is convenient for established 5 V embedded platforms. Before layout release, confirm logic polarity and the meaning of RS-232 assertion levels because a logic-high output does not necessarily represent the same asserted state as the opposite logic convention.
अनुशंसित
Test and Measurement Systems
The ADM208EARZ can serve as the multiport RS-232 interface in test and measurement systems that communicate with older bench instruments. Four drivers and four receivers provide a practical balance between multiport capability and package count, while the 230 kbps rate suits command, status, and measurement-result transfers. The -40 °C to +85 °C range supports use across industrial and laboratory temperature conditions. Keep switching or high-energy circuits away from the RS-232 traces, and use a defined chassis or signal-ground strategy to prevent ground currents from disturbing measurements.
अनुशंसित
Multiport Communication Equipment
The ADM208EARZ is well suited to communication equipment that needs multiple RS-232 ports in a restricted PCB area. Four transmitter and four receiver channels consolidate eight line functions into one 24-pin SOIC, allowing a controller to bridge several downstream devices. The single +5 V architecture simplifies power design, and the 0.1 µF charge-pump capacitor requirement supports straightforward implementation. Because charge-pump energy is present during operation, route sensitive signals away from the capacitor and maintain short return paths to achieve reliable electromagnetic compatibility.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADM208EARZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADM208EAR | HIN208EIAZ-T |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 24-pin SOIC | 24-pin SOIC - same | 24-pin SOIC - same |
| Transmitter Channels | 4 | 4 | 4 |
| Receiver Channels | 4 | 4 | 4 |
| Maximum Data Rate | 230 kbps | 230 kbps | 230 kbps |
मुख्य विशेषताएँ
- Four transmitters and four receivers in one package (बनामMAX3221IPWR)
- Direct same-manufacturer ordering path (बनामHIN208EIAZ-T)
- Single-supply RS-232 operation (बनामHIN208EIAZ-T)
डिज़ाइन नोट्स
Place the specified 0.1 µF charge-pump capacitor directly between the pins identified in the ADM208 family pin-description table. Keep the loop area small because this capacitor carries high-frequency charge-pump current. Similarly, position the supply bypass capacitor close to the device's supply and ground pins. Short return paths reduce switching-node coupling into receiver inputs and improve conducted and radiated emissions.
Separate logic-side nets from connector-side RS-232 nets during floor planning. Driver outputs are high-voltage, bipolar signals, so they should not run beneath sensitive logic or analog traces. Where the PCB permits, place protection components near the connector and preserve a direct chassis or signal-ground return. Avoid long parallel runs between driver outputs and receiver inputs to reduce capacitive crosstalk.
Do not treat RS-232 logic polarity like ordinary TTL logic. Confirm the transmitter input polarity, receiver output polarity, and external connector signal names before finalizing firmware. Also verify that the host port can source or sink the required RS-232 levels. The ADM208EARZ converts between logic and RS-232 voltage domains, but it does not create a standards-compliant null modem arrangement by itself.
The charge-pump and line-driver transitions can create electromagnetic emissions, particularly when long external cables radiate high-frequency energy. Keep the charge-pump capacitor close to the IC, use a solid ground plane where appropriate, and provide connector-side filtering or protection appropriate to the target environment. Validate emissions with the finished cable and enclosure because board-only testing may not reproduce the installed system.
अनुपालन जानकारी
The ADM208 family is described as compliant with the EU EMC directive 89/336/EEC, but the exact ADM208EARZ RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified.