Analog Devices

ADM231LARZ - Low-Power +5V RS-232 Transceiver | Analog Devices

MPN: ADM231LARZ ✗ জীবনকালের সমাপ্তি
+5 V Vdss 16-pin SOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADM231LARZ সারাংশ

Analog Devices ADM231LARZ is a low-power, +5V CMOS RS-232 transceiver containing two drivers and two receivers in a 16-pin SOP package. The device operates from a single +5V supply, is intended for industrial-temperature RS-232 interface equipment, and supports a maximum supply voltage of 5.5 V. Its four-channel arrangement allows two bidirectional communication links or two unidirectional links on a compact printed circuit board.

An RS-232 transceiver is an interface IC that converts logic-level signals between a microprocessor or UART and the voltage-defined RS-232 port. It belongs to the line-driver and receiver hierarchy, combining driver circuitry, receiver circuitry, level shifting, and electrical-noise control in one package. Such devices provide the voltage translation and signal conditioning required when a CMOS UART operates from a supply rail different from the RS-232 interface voltage range.

The ADM231L series is identified by Analog Devices as a low-power, +5V CMOS RS-232 solution. The ADM231LARZ combines two transmitters and two receivers, which permits simultaneous operation of two serial channels or allocation of separate transmit and receive paths. Its SOP-16 package is suitable for conventional through-hole PCB assembly and industrial control, instrumentation, data-acquisition, and embedded equipment designs.

Analog Devices lists the ADM231L family as obsolete, making lifecycle status an important selection criterion for new designs. For an existing supported design, the device can remain appropriate where its original electrical and pin requirements are already validated. For a new production release, engineers should evaluate a currently supported RS-232 transceiver after checking pin compatibility, supply voltage, driver and receiver ratings, shutdown behavior, and external-network requirements.

Typical applications include industrial serial consoles, barcode-scanner interfaces, test equipment, embedded data loggers, and RS-232 port expansion. In a two-port design, each transmitter drives a corresponding receiver through the external RS-232 connector and cable network. The internal receiver converts the bipolar RS-232 signal back to a logic level that can be interpreted directly by a UART.

PCB design should follow the Analog Devices pin-description table and the manufacturer’s recommended decoupling guidance. Place the +5V bypass capacitor close to the supply pins, route driver outputs and receiver inputs away from sensitive logic, and verify connector protection for the intended cable length and industrial noise environment. RS-232 voltage levels must not be applied directly to a UART pin without the transceiver.

This page combines the manufacturer lifecycle statement with practical guidance for obsolete-part risk assessment, interface topology selection, PCB implementation, and drop-in replacement investigation. It also distinguishes the verified ADM231LARZ identity from unconfirmed alternatives, helping engineers make a defensible sourcing and redesign decision.

এর জন্য ড্রপ-ইন বিকল্প ADM231LARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

ADM231LARZ বিশেষণ

Product Type RS-232 transceiver
সাপ্লাই ভোল্টেজ +5 V
Maximum Supply Voltage 5.5 V
Driver Count 2
Receiver Count 2
Interface Standard EIA-232-E
Technology CMOS
Power Class Low power
Temperature Grade Industrial
প্যাকেজ 16-pin SOP
Terminal Count 16
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস unknown
REACH Status unknown

ADM231LARZ 16-pin sop পিন কনফিগারেশন গাইড

ADM231LARZ (16-pin sop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADM231LARZ-এর জন্য 16-pin sop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM231LARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADM231LARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Console, Barcode Scanner Interface, Data Acquisition Instrument, Embedded UART Port Expansion, Instrumentation Control System, Serial Data Logger.

🏭

Industrial Serial Console

The ADM231LARZ fits an industrial serial console requiring two RS-232 channels from a +5V supply. Two drivers and two receivers allow the console to support separate transmit and receive paths or two bidirectional ports. The device is appropriate when an established UART board uses this SOP-16 footprint and the original interface timing is already validated. Because the ADM231L family is obsolete, a new production release should also evaluate a currently supported transceiver with equivalent pin and signal behavior.

🏭

Barcode Scanner Interface

The ADM231LARZ can connect a barcode scanner or other RS-232 peripheral to a controller that operates from +5V. Its driver converts the controller’s logic-level transmit signal to RS-232 levels, while the receiver converts the scanner response back to CMOS logic for the UART. The dual-driver and dual-receiver arrangement provides additional interface capacity for configuration or auxiliary devices. Confirm signal polarity, data rate, and connector wiring against the Analog Devices ADM231L datasheet.

🔧

Data Acquisition Instrument

The ADM231LARZ is suitable for laboratory and industrial data-acquisition equipment that communicates through legacy RS-232 ports. A single +5V supply powers the interface, while the two transmit and two receive channels support more than one instrument connection or separate control and measurement paths. The SOP-16 package simplifies integration with equipment that already uses surface-mount through-hole assembly. Verify ground referencing, cable transients, and logic thresholds before connecting external equipment.

🧩

Embedded UART Port Expansion

The ADM231LARZ can expand the serial connectivity of an embedded controller when two RS-232 links are required. The two transmitters drive outbound UART signals after RS-232 level conversion, and the two receivers recover logic-level inputs from connected devices. Using a dedicated transceiver prevents the controller from directly handling bipolar RS-232 voltage levels. Existing designs should verify the 16-pin SOP footprint and all enable or shutdown connections in the manufacturer pin-description table.

⚡

Instrumentation Control System

The ADM231LARZ fits legacy instrumentation systems that rely on RS-232 for configuration, test commands, and status reporting. Its +5V operation allows implementation in equipment where the control electronics do not have a higher-voltage interface rail. Two driver and receiver channels can serve two ports without duplicating the level-conversion function. Designers should check receiver noise immunity, line-driver loading, and the external RS-232 connector’s surge-protection arrangement before deployment.

📱

Serial Data Logger

The ADM231LARZ can be used in a compact data logger that exchanges commands and recorded data through RS-232. Its two channels permit a bidirectional command port plus a second status or export link, while the +5V supply requirement supports integration with embedded control electronics. For an existing SOP-16 layout, this arrangement preserves the established footprint and reduces redesign risk. For new loggers, compare a supported transceiver for supply availability, low-power behavior, and exact UART compatibility.

What is the ADM231LARZ?
The ADM231LARZ is a low-power, +5V CMOS RS-232 transceiver containing two drivers and two receivers in a 16-pin SOP package. According to the Analog Devices ADM231L datasheet, Revision C, it is designed for equipment requiring multiple RS-232 channels operating from a single 5 V supply. The four converter channels can support two bidirectional RS-232 links or separate transmit and receive paths.
What is the operating voltage of ADM231LARZ?
The ADM231LARZ operates from a single +5 V supply, with a listed maximum supply voltage of 5.5 V. The Analog Devices ADM231L datasheet identifies the device as a +5V CMOS RS-232 transceiver. Designers should maintain the supply within the manufacturer’s stated limits and include local high-frequency bypass capacitance near the device’s supply connection.
How many RS-232 drivers and receivers does ADM231LARZ contain?
The ADM231LARZ contains two RS-232 drivers and two receivers. This arrangement allows one common interface pattern to provide two bidirectional serial ports, with each driver paired with a receiver, or to divide the four converters into two transmit-only and two receive-only channels. The two-driver, two-receiver configuration is explicitly identified in the Analog Devices ADM231L datasheet, Revision C.
What package does ADM231LARZ use?
The ADM231LARZ is supplied in a 16-pin SOP package and is intended for surface-mount PCB assembly. Product listings identify 16 terminals and a rectangular gull-wing package. Use the pin-description table in the Analog Devices ADM231L datasheet, Revision C, when assigning PCB tracks, because a matching pin count alone does not establish pin-to-pin compatibility with another RS-232 transceiver.
Is ADM231LARZ still active?
No. Analog Devices marks the ADM231L family as obsolete on its official product page. Existing equipment can continue using an appropriately qualified obsolete component, but new production designs should assess supply continuity and compare a currently supported RS-232 transceiver. Any substitute must be checked for pinout, supply voltage, logic levels, data rate, and power behavior.
Where can I download the ADM231LARZ datasheet PDF?
The official ADM231L datasheet is available through the Analog Devices product page linked on this page. The manufacturer identifies the document as the ADM231L Low Power, +5V CMOS RS-232 Transceiver Data Sheet, Revision C. Use that document for the complete electrical characteristics, pin descriptions, timing information, typical applications, and recommended application circuit.
Where can I find the ADM231LARZ pinout?
The ADM231LARZ pinout is defined by the pin-description table in the Analog Devices ADM231L datasheet, Revision C. The device uses a 16-pin SOP package with two driver outputs, two receiver inputs, power connections, ground, and control or enable functions as shown by the manufacturer. Cross-check every net against the datasheet before designing or modifying a PCB.
What are the key specifications engineers should know about ADM231LARZ?
The essential ADM231LARZ specifications are its +5V supply, 5.5V maximum supply voltage, low-power CMOS design, two drivers, two receivers, industrial temperature grade, and 16-pin SOP package. The device implements the EIA-232-E interface and is listed as obsolete by Analog Devices. Detailed thresholds, data rate, quiescent current, and timing values should be taken from the manufacturer datasheet.
What can replace ADM231LARZ?
The ADM231LARZ requires a replacement with the same 16-pin SOP footprint and compatible RS-232 interface behavior. A candidate should match the +5V supply, logic thresholds, driver and receiver levels, data rate, enable or shutdown arrangement, and temperature grade. The available cross-reference material identifies ADM231LJRZ as a comparable part, but production use requires confirmation of its complete pinout and electrical ratings.
Is ADM231LJRZ the same as ADM231LARZ?
ADM231LJRZ is listed in a component comparison against ADM231LARZ, making it the closest identified replacement candidate. It is not automatically interchangeable until its pin assignments, supply requirements, temperature grade, data rate, and electrical characteristics have been checked against the Analog Devices ADM231L datasheet. Treat the cross-reference as a starting point for qualification rather than proof of drop-in compatibility.
What is the best equivalent for ADM231LARZ in industrial equipment?
The best equivalent is the device that preserves the ADM231LARZ’s 16-pin SOP footprint, +5V operation, two-driver and two-receiver arrangement, and required EIA-232-E electrical behavior. ADM231LJRZ is the closest identified cross-reference candidate, but its qualified supply source, temperature range, enable functions, and timing characteristics must be validated before it is used as a direct replacement in industrial equipment.
ADM231LARZ vs ADM231LJRZ — which is better for an industrial RS-232 interface?
ADM231LJRZ is the better replacement candidate when it confirms pin-to-pin and electrical compatibility with ADM231LARZ, while ADM231LARZ remains the reference for the original design. The ADM231LARZ is an obsolete industrial-grade, +5V, dual-driver and dual-receiver RS-232 device in SOP-16. Compare both parts’ pin descriptions, temperature grades, data rate, supply current, and enable logic before deciding.
When should I choose ADM231LARZ instead of a newer RS-232 transceiver?
Choose ADM231LARZ when preserving an existing SOP-16 PCB is more important than obtaining a currently supported component and the original electrical behavior has already been validated. The device provides two drivers and two receivers from +5V for dual-channel RS-232 designs. For new products, favor a supported part unless long-term availability and exact interface compatibility are satisfactorily resolved.
Is ADM231LARZ suitable for an RS-232 port on an embedded controller?
The ADM231LARZ is suitable when the embedded controller’s UART uses CMOS logic and the system can provide a +5V supply. Its two driver and two receiver channels can implement two RS-232 links, while its transceiver circuits handle the required logic-to-RS-232 voltage conversion. Verify logic thresholds, timing, data rate, port isolation, and connector-level protection against the manufacturer datasheet.
Where to buy ADM231LARZ online?
Use the Request a Quote form on this page to request ADM231LARZ availability, quantity, and lead time. Because Analog Devices identifies the ADM231L family as obsolete, buyers should request the exact ADM231LARZ ordering code, date-code condition, packaging, and traceability requirements. Current availability should be confirmed through the quote process rather than inferred from general search listings.
What is the price and lead time of ADM231LARZ?
Current ADM231LARZ commercial terms should be requested through the Request a Quote form on this page. The quote should specify the exact MPN, quantity, packaging, acceptable date code, and target delivery date. Because the ADM231L family is obsolete, lead time and availability can vary with remaining factory inventory, traceability requirements, and lot continuity.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM231LARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ADM231LARZ when maintaining an existing SOP-16 PCB is essential, the system uses +5V, and two RS-232 drivers and two receivers satisfy the interface plan. It is particularly suitable for obsolete industrial equipment that has already validated its signal timing, logic thresholds, and pin assignments. For a new product, favor a currently supported RS-232 transceiver unless long-term supply continuity and exact compatibility can be established. A generic SOP-16 transceiver is not automatically a drop-in replacement because enable pins, shutdown circuits, receiver thresholds, and driver levels may differ. Compare any candidate using the Analog Devices ADM231L datasheet, including supply current, data rate, temperature range, receiver noise immunity, and channel mapping. The listed ADM231LJRZ comparison candidate requires a complete engineering review before substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Product Type RS-232 transceiver
Supply Voltage +5 V
Maximum Supply Voltage 5.5 V
Driver Count 2
Receiver Count 2
Interface Standard EIA-232-E
Package 16-pin SOP
Brand Analog Devices
Temperature Grade Industrial
Lifecycle Status Obsolete
Technology CMOS
Power Class Low power

মূল পার্থক্যসমূহ

  • Four RS-232 conversion channels in one SOP-16 device (বনামSingle-channel RS-232 driver families)
  • Single +5V interface implementation (বনামHigher-voltage RS-232 transceiver families)
  • Established industrial interface format (বনামNewer compact interface packages)

ডিজাইন নোট

Assign every connection from the Analog Devices ADM231L datasheet, Revision C, rather than inferring pin functions from another 16-pin RS-232 transceiver. Confirm the SOP-16 footprint, pin-1 orientation, power pins, enable or shutdown functions, driver outputs, and receiver inputs. Place the supply bypass capacitor close to the +5V connection and provide an unobstructed ground return to minimize susceptibility to switching and cable-coupled noise.

Do not connect RS-232 driver outputs directly to a microcontroller UART, and do not connect a UART pin directly to an RS-232 connector. The ADM231LARZ performs the required level translation in both directions. Also avoid assuming that another SOP-16 RS-232 device is pin-compatible: enable polarity, shutdown behavior, receiver thresholds, driver voltage, and channel assignment can differ even when the package dimensions match.

For industrial equipment, keep the transceiver close to the RS-232 connector and separate driver outputs from receiver inputs and sensitive control traces. Use the manufacturer’s recommended supply decoupling and provide suitable connector protection for the expected cable environment. Validate the completed assembly for ESD, conducted noise, ground offsets, and unintended receiver activity before production release.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The Analog Devices product page identifies the ADM231L family as obsolete but does not expose RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status in the verified product summary.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADM231LARZ datasheet ADM231LARZ pinout ADM231LARZ datasheet pdf ADM231LARZ equivalent ADM231LARZ replacement ADM231LARZ cross reference ADM231LARZ vs ADM231LJRZ ADM231LARZ price ADM231LARZ stock Analog Devices ADM231LARZ ADM231LARZ SOP-16 footprint ADM231LARZ industrial RS-232 interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADM231LARZ ADM231L ADM231LJRZ RS-232 transceiver line transceiver RS-232 EIA-232-E CMOS UART interface IC RS-232 driver RS-232 receiver SOP-16 surface mount industrial temperature grade +5V supply 5.5V maximum supply voltage RS-232 driver/receiver data acquisition industrial instrumentation obsolete component Analog Devices ADM231L datasheet Revision C
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন