Analog Devices

ADM233LJNZ - 120kbps RS-232 Transceiver | Analog Devices

MPN: ADM233LJNZ ✓ সক্রিয়
5 V Vdss 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADM233LJNZ সারাংশ

The Analog Devices ADM233LJNZ is a single-chip, 2/2 RS-232 line transceiver operating from one 5 V supply, with a maximum data rate of 120 kbps in a 20-pin PDIP package. It includes two RS-232 drivers, two RS-232 receivers, on-board DC-DC converters, and approximately ±9 V output swing for reliable single-ended EIA-232-E and V.28 communications.

A line transceiver is an interface circuit that translates logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into digital logic levels. Within the interface hierarchy, it belongs to the RS-232 transceiver family of communication ICs, where it bridges modern controller logic and legacy point-to-point serial equipment. The ADM233L is particularly useful when a system cannot provide the traditional ±12 V RS-232 supply.

The integrated DC-DC conversion system produces the bipolar voltages required by RS-232 from a single 5 V rail, eliminating the need for external charge-pump components. The device supports 120 kbps signaling, provides two transmit channels and two receive channels, and uses small 1 µF external capacitors as stated by Analog Devices. Its dual-driver, dual-receiver arrangement makes it suitable for links requiring one bidirectional channel plus one additional direction, or for a design that can be configured differently around the two driver and receiver sections.

The ADM233L is intended for EIA-232-E and V.28 interfaces where 12 V is unavailable. Its single-supply architecture simplifies power distribution while retaining the voltage levels expected by RS-232 equipment. Because RS-232 is a single-ended, unbalanced interface, board layout should keep the driver outputs and receiver inputs away from sensitive analog and high-speed digital traces. The transmitter and receiver functions should also be routed so outgoing and incoming signals do not unnecessarily share long parallel paths.

Typical uses include industrial serial-control links, data-acquisition equipment, service interfaces, test systems, and embedded controllers communicating with RS-232 peripherals. The 120 kbps rate is appropriate for configuration commands, telemetry, firmware transfer, and general-purpose serial control where longer distances and noise immunity are more important than very high throughput. A null modem or crossover arrangement is still required when connecting two similarly configured data-terminal devices.

The principal design consideration is decoupling and signal integrity. Place the specified 1 µF capacitors close to their associated pins, provide a stable 5 V supply, and route each RS-232 signal as a direct point-to-point channel. Avoid long unprotected traces adjacent to switching nodes or high-current return paths. For industrial equipment, verify the complete board against the applicable EMC requirements and provide appropriate chassis grounding at the connector rather than relying on the logic ground alone.

This product overview combines the confirmed ADM233LJNZ electrical features, package details, interface standards, and practical RS-232 layout guidance with drop-in comparison information intended to accelerate component selection and PCB redesign planning.

এর জন্য ড্রপ-ইন বিকল্প ADM233LJNZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADM233LJNZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Interface Standard, Maximum Data Rate.

ADM233LJN

✅ ড্রপ-ইন
Analog Devices
📦 20-pin PDIP
5 V · RS-232 · 2 driver and 2 receiver channels · 120 kbit/s · ±9 V · 1 µF · On-board · 30 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADM233LAN

✅ ড্রপ-ইন
Analog Devices
📦 20-pin PDIP
সামঞ্জস্যপূর্ণ স্পেসিফিকেশন

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADM233LANZ

✅ ড্রপ-ইন
📦 20-pin PDIP
Same 120 kbps data rate and 2/2 transceiver configuration; 0 kbps and 0-channel nominal differences, with grade-specific details requiring confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX203CPP+G36

✅ ড্রপ-ইন
📦 20-pin PDIP
Same 20-pin PDIP format and RS-232 transceiver function; the MAX203 uses its own capacitor and operating-grade requirements, which require pin-level verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX203ECPP+G36

✅ ড্রপ-ইন
📦 20-pin PDIP
Same 20-pin PDIP format and RS-232 transceiver function; the MAX203 uses its own capacitor and operating-grade requirements, which require pin-level verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM233LJNZ বিশেষণ

Device Type 2/2 RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 120 kbps
সাপ্লাই ভোল্টেজ 5 V
RS-232 Output Swing Approximately ±9 V
External Capacitor Value 1 µF
Interface Standard EIA-232-E
Interface Standard V.28
প্যাকেজ 20-pin PDIP
Package Pin Count 20 pins
মাউন্টিং টাইপ Through-hole
Integrated DC-DC Converters On-board
External Power-Supply Requirement No external ±12 V supply

ADM233LJNZ 20 pins পিন কনফিগারেশন গাইড

ADM233LJNZ (20 pins প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADM233LJNZ-এর জন্য 20 pins প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM233LJNZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADM233LJNZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Control, Data Acquisition Equipment, Embedded Equipment Interface, Test and Measurement Systems, Service and Configuration Port, Telemetry and Remote Control.

🏭

Industrial Serial Control

The ADM233LJNZ is appropriate for industrial controllers that communicate with legacy RS-232 equipment through a 5 V supply. Its 120 kbps data rate supports configuration commands, status reporting, and moderate firmware transfers without requiring an external ±12 V rail. The two transmitters and two receivers provide flexible channel allocation for a bidirectional control link or separate point-to-point paths. On-board DC-DC conversion generates the approximately ±9 V driver swing internally. Designers should still route the RS-232 traces away from switching power nodes and verify the enclosure’s ESD and surge-protection requirements.

📊

Data Acquisition Equipment

The ADM233LJNZ fits data-acquisition instruments that expose a compact RS-232 command or measurement interface. At up to 120 kbps, it can transfer sampled status data, configuration records, and diagnostic commands over a point-to-point cable. Its single 5 V operation is useful when the instrument already has a low-voltage control rail but lacks space for external bipolar generation circuitry. Two drivers and two receivers permit a bidirectional command path plus a separate reporting channel. Place the required 1 µF capacitors near the device and use protected connector-side routing where cables enter industrial or laboratory equipment.

🧩

Embedded Equipment Interface

Embedded systems can use the ADM233LJNZ to bridge low-voltage controller logic and an RS-232 peripheral without a separate negative supply. The integrated converters produce the bipolar voltage required for approximately ±9 V driver output, while the receiver channels return EIA-232-E-compatible signals to digital logic. The 120 kbps rate is suitable for configuration menus, boot-loader messages, and supervisory telemetry rather than continuous high-bandwidth transfers. Because RS-232 is unbalanced and single-ended, keep the interface away from high-current switching paths and provide a defined signal-ground strategy at the cable connector.

🔧

Test and Measurement Systems

The ADM233LJNZ can provide a compact RS-232 control port for test and measurement instruments that already operate from a 5 V logic rail. The 120 kbps interface rate is sufficient for remote commands, calibration records, measurement-result transfers, and equipment self-tests. On-board DC-DC converters reduce the external power-component count, making the device useful where panel space is constrained. The two-driver, two-receiver organization supports flexible test fixtures and adapters. Keep the transceiver away from high-voltage switching stages, and use the manufacturer pin description and external-capacitor layout to avoid introducing signal-integrity problems near sensitive measurement circuitry.

🌐

Service and Configuration Port

A service port built around the ADM233LJNZ can provide reliable configuration access for network appliances, industrial controllers, and peripheral equipment. The 120 kbps rate is more than adequate for command sequences, boot configuration, and diagnostic text, while the integrated DC-DC system avoids a separate ±12 V supply section. Two driver and two receiver channels allow implementation of a primary bidirectional port and an auxiliary channel when needed. Maintain direct point-to-point routing, provide chassis-to-signal-ground provisions at the connector, and evaluate the complete assembly for electrostatic-discharge and conducted-noise requirements.

📡

Telemetry and Remote Control

The ADM233LJNZ supports telemetry links between a control system and remotely located instruments or vehicle-like industrial equipment. Its 120 kbps ceiling permits periodic status reporting, command acknowledgments, and moderate configuration-file transfers. The single 5 V supply requirement is convenient for embedded systems with limited power architecture, while onboard DC-DC conversion supplies the required RS-232 voltage levels. The two transmitters and two receivers can support separate command and telemetry directions. Because the interface is single-ended, route incoming and outgoing signals to minimize parallel-trace coupling and include appropriate protection at any externally accessible cable connection.

What is the operating voltage of ADM233LJNZ?
The ADM233LJNZ operates from a single 5 V supply. According to the Analog Devices ADM233L datasheet, onboard DC-DC converters generate the bipolar voltage required by the RS-232 drivers, producing approximately ±9 V output swing without an external ±12 V supply. This architecture simplifies system power distribution while retaining EIA-232-E and V.28 interface levels.
What is the maximum data rate of ADM233LJNZ?
The ADM233LJNZ supports data rates up to 120 kbps. The Analog Devices ADM233L datasheet identifies the device as a 2/2 RS-232 transceiver, providing two driver channels and two receiver channels. This rate is suitable for configuration links, telemetry, firmware communication, and industrial serial-control equipment where reliable point-to-point signaling is more important than very high bandwidth.
Does ADM233LJNZ require external ±12 V power?
No, the ADM233LJNZ requires only a single 5 V supply because it includes onboard DC-DC converters. According to the Analog Devices ADM233L product documentation, these converters provide the bipolar drive voltage needed for RS-232 operation, yielding approximately ±9 V output swing. The device therefore avoids external charge-pump and regulated bipolar-supply circuitry.
Where can I download the ADM233LJNZ datasheet PDF?
The official ADM233LJNZ documentation is available through the Analog Devices ADM233L product page and the manufacturer datasheet linked from that page. The device is documented as a 5 V-powered CMOS RS-232 driver and receiver family member with a 120 kbps data rate, onboard DC-DC converters, and approximately ±9 V output swing.
Where can I find the ADM233LJNZ pinout?
The ADM233LJNZ pinout is shown in the pin-description table and package drawing in the Analog Devices ADM233L datasheet. The confirmed package is a 20-pin PDIP, and the part includes two transmitters and two receivers. Use the manufacturer pin table when assigning PCB nets because the package uses through-hole leads and includes the external-capacitor and power connections required by the integrated converter.
What can replace the ADM233LJNZ?
The ADM233LJN, ADM233LAN, and ADM233LANZ are same-manufacturer RS-232 transceiver candidates with a 20-pin PDIP format, while MAX203CPP+G36 and MAX203ECPP+G36 are cross-reference candidates. Because exact pin assignments and operating-temperature limits must be compared before substitution, use the ADM233L datasheet and the replacement device’s datasheet to verify every connection rather than relying on package appearance alone.
Is the ADM233LJNZ the same as ADM233LJN?
The ADM233LJNZ and ADM233LJN are closely related 2/2, 120 kbps RS-232 transceivers in 20-pin PDIP packages. Their core channel count and data rate match, but the ADM233LJN is identified as obsolete while the ADM233LJNZ remains listed as an active product. Confirm temperature grade, lifecycle requirements, and exact pin assignments against the manufacturer documentation before using either part in a new design.
What is the best cross-brand equivalent for ADM233LJNZ?
The MAX203CPP+G36 is the strongest cross-brand candidate identified for the ADM233LJNZ because it appears as a datasheet-similar substitute in the available cross-reference results and uses the same 20-pin PDIP format. Verify the MAX203 pin configuration, supply requirements, capacitor values, and operating-temperature range before substitution; package equivalence alone does not guarantee every pin has the same function.
When should I choose ADM233LJNZ over ADM233LJN?
Choose the ADM233LJNZ over the obsolete ADM233LJN for new production designs that need an active lifecycle position. Both provide a 2/2 RS-232 arrangement, a 120 kbps data rate, and a 20-pin PDIP package. The principal selection advantage is lifecycle continuity rather than a change in the stated channel count or nominal data rate.
Is ADM233LJNZ suitable for industrial serial-control systems?
The ADM233LJNZ is suitable for industrial serial-control links that operate from 5 V and require EIA-232-E or V.28 signaling at up to 120 kbps. Its two drivers, two receivers, and integrated DC-DC conversion reduce external power circuitry. The complete enclosure must still address RS-232 ESD, surge exposure, grounding, and applicable electromagnetic-compatibility requirements.
How should the 1 µF capacitors be placed around ADM233LJNZ?
Place the specified 1 µF capacitors close to their associated ADM233LJNZ pins and maintain short, direct return paths to the device ground. Analog Devices specifies 1 µF external capacitors as part of the ADM233L operating approach. Keeping these connections compact reduces supply and converter-related disturbance, while separating the RS-232 routes from sensitive analog traces helps preserve signal integrity.
Where can I buy ADM233LJNZ and request a quote?
Use the Request a Quote form on this page to request ADM233LJNZ availability, current pricing, minimum order quantity, and lead time. The part is identified as a 20-pin PDIP RS-232 transceiver from Analog Devices, with a 120 kbps data rate and a 5 V supply. Submit the required quantity and target package configuration for an order-specific response.
What is the price of ADM233LJNZ?
Current ADM233LJNZ pricing depends on order quantity and market conditions. Use the Request a Quote form on this page for a current quote rather than relying on an archived unit price. The structured pricing area identifies the exact 20-pin PDIP ordering code and can be checked alongside the requested quantity before placing an order.
What is the lead time for ADM233LJNZ?
The lead time for ADM233LJNZ depends on current manufacturer and channel inventory. Use the Request a Quote form on this page and provide the required quantity, target date, and tube or other approved packaging needs. The confirmed ordering code is ADM233LJNZ, a 20-pin PDIP device from Analog Devices.
Is ADM233LJNZ in stock?
Stock availability for ADM233LJNZ changes with order quantity and procurement timing. Use the Request a Quote form on this page for an order-specific availability response. The part is listed as active and is offered in a 20-pin PDIP package, so the request should identify the desired quantity and any required delivery schedule.
What are the key specifications of ADM233LJNZ that engineers should know?
The key ADM233LJNZ specifications are a single 5 V supply, 120 kbps maximum data rate, two drivers, two receivers, onboard DC-DC conversion, approximately ±9 V RS-232 output swing, and a 20-pin PDIP package. Analog Devices identifies the family for EIA-232-E and V.28 interfaces. These features make it especially useful where external ±12 V power is unavailable.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM233LJNZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADM233LJNZ for new designs that need a 2/2 RS-232 interface operating from one 5 V rail, particularly when onboard DC-DC conversion and a 120 kbps data rate are preferred. Select ADM233LJN only for an existing design where lifecycle risk is acceptable and exact pin, grade, and capacitor requirements have already been validated. ADM233LAN and ADM233LANZ are appropriate same-manufacturer alternatives when their specific temperature grade, lifecycle, and pin details meet the design requirements. For a second-source design using another manufacturer, MAX203CPP+G36 and MAX203ECPP+G36 are the available 20-pin PDIP candidates, but both require direct comparison of pin functions, capacitor values, supply behavior, and qualification. In every case, verify the manufacturer datasheet rather than assuming that identical PDIP outlines guarantee interchangeable connections.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADM233LJN ADM233LAN ADM233LANZ MAX203CPP+G36 MAX203ECPP+G36
Package 20-pin PDIP 20-pin PDIP - same 20-pin PDIP - same 20-pin PDIP - same 20-pin PDIP - same 20-pin PDIP - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated
Device Type 2/2 RS-232 transceiver 2/2 RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver

মূল পার্থক্যসমূহ

  • Active lifecycle option within the ADM233L family (বনামADM233LJN)
  • Single 5 V supply with integrated bipolar generation (বনামMAX203CPP+G36)
  • Confirmed 2/2 channel arrangement at 120 kbps (বনামADM233LANZ)

ডিজাইন নোট

Place the manufacturer-required 1 µF capacitors close to their associated ADM233LJNZ pins, with short ground returns and no intervening test pads where practical. Keep the 5 V trace and capacitor connections compact because they support the internal DC-DC conversion that creates the approximately ±9 V RS-232 swing. Route the external RS-232 lines directly between the transceiver and connector rather than sharing paths with clocks, relay contacts, or switching-converter outputs.

RS-232 is a single-ended interface, so the physical cable route should be kept away from high-current switching nodes and motors. Maintain separation between outgoing TX and incoming RX routes, especially when both are present in the same harness. If the board connects to an external cable, place the connector near the chassis entry and evaluate protection components for the required electrostatic-discharge and surge environment before finalizing the layout.

Do not substitute based only on the 20-pin PDIP outline. Before replacing the ADM233LJNZ with ADM233LJN, ADM233LAN, ADM233LANZ, MAX203CPP+G36, or MAX203ECPP+G36, compare the complete pin-description tables, external-capacitor values, supply requirements, driver and receiver channel assignments, and temperature grades. The ADM233LJN is obsolete, while the operating and qualification details of the other candidates require confirmation before production use.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product page and cross-reference information do not establish the requested environmental, lead-free, halogen-free, or conflict-minerals declarations. The device is an industrial and commercial RS-232 interface IC rather than an automotive-qualified AEC-Q100 component.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADM233LJNZ datasheet ADM233LJNZ pinout ADM233LJNZ datasheet pdf ADM233LJNZ equivalent ADM233LJNZ replacement ADM233LJNZ cross reference ADM233LJNZ vs MAX203CPP+G36 ADM233LJNZ footprint ADM233LJNZ price ADM233LJNZ stock Analog Devices ADM233LJNZ ADM233LJNZ 120kbps RS-232 ADM233LJNZ PDIP-20 pinout ADM233LJNZ single 5V supply ADM233LJNZ industrial serial interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADM233LJNZ ADM233L ADM233LJN ADM233LAN ADM233LANZ MAX203CPP+G36 MAX203ECPP+G36 RS-232 transceiver line driver line receiver interface IC EIA-232-E V.28 DC-DC converter 120 kbps 5 V approximately ±9 V 20-pin PDIP PDIP package through-hole package 1 µF capacitor industrial serial control telemetry data acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন