Texas Instruments

ADS1286PA - 12-Bit, 37 kSPS Low-Power ADC | Texas Instruments

MPN: ADS1286PA ✓ সক্রিয়
4.5 V to 5.25 V Vdss 250 µA Id 8-PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADS1286PA সারাংশ

The Texas Instruments ADS1286PA is a 12-bit, single-input SAR analog-to-digital converter with a 37 kS/s conversion rate, differential input, and 250 µA nominal supply current in an 8-PDIP package. It operates from a 4.5 V to 5.25 V single supply and combines a sample-and-hold amplifier with an SPI or SSI-compatible serial interface for compact, low-power measurement systems.

An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and converts it into a digital code for processing. The ADS1286 belongs to the sampling ADC and SAR ADC hierarchy, where successive approximation rounds the input voltage during each conversion. Its differential architecture measures the voltage between two analog inputs, improving rejection of common-mode interference when the signal source is balanced.

Key characteristics include 12-bit resolution, a 37 kS/s conversion rate, and a nominal supply current of 250 µA. The converter offers 90 dB of spurious-free dynamic range, 1 LSB differential nonlinearity, and 2 LSB integral nonlinearity. Its SPI and SSI-compatible serial interface supports two-wire or three-wire communication, reducing the number of connections required in remote and distributed sensing equipment.

The sampling architecture captures the analog input before conversion, while the internal sample-and-hold amplifier isolates the source during successive approximation. Differential input handling is useful for bridge sensors, instrumentation signals, and other systems in which common-mode noise can obscure a low-level signal. The 8-PDIP package is suitable for through-hole prototyping, educational instruments, and legacy industrial control systems where a surface-mount footprint is unnecessary.

Typical applications include battery-powered portable instruments, pressure and temperature monitoring, industrial sensor interfaces, laboratory measurement equipment, and low-power remote data-acquisition nodes. The 250 µA nominal current and 4.5 V to 5.25 V supply range are particularly useful when system power is constrained and a regulated 5 V rail is already available.

When designing around the ADS1286PA, preserve the input voltage range, provide a stable reference, and route the differential input pair symmetrically to minimize pickup from nearby switching circuitry. Input filtering, reference bypassing, and a quiet grounding strategy are central to achieving the converter's specified linearity and dynamic-range performance.

This page organizes the principal electrical specifications, application guidance, package information, and verified substitute constraints for ADS1286PA. It also distinguishes true pin-compatible replacements from related devices that require a different footprint, helping engineers shorten component-selection and board-layout work without overlooking package-level compatibility.

এর জন্য ড্রপ-ইন বিকল্প ADS1286PA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

ADS1286PA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

রেজোলিউশন 12 bit
Conversion Rate 37 kS/s
Architecture 1-input SAR ADC
Input Type Differential
Supply Voltage Range 4.5 V to 5.25 V
Nominal Supply Current 250 µA
Serial Interface SPI or SSI compatible
Spurious-Free Dynamic Range 90 dB
Differential Nonlinearity 1 LSB
Integral Nonlinearity 2 LSB
Sample-and-Hold Amplifier Integrated
প্যাকেজ 8-PDIP
Package Contact Finish Gold contact
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
Number of Analog Inputs 1 differential input

ADS1286PA gold contact পিন কনফিগারেশন গাইড

ADS1286PA (gold contact প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

ADS1286PA-এর জন্য gold contact প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADS1286PA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADS1286PA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Interfaces, Battery-Powered Measurement Instruments, Remote Environmental Monitoring, Laboratory Instrumentation, Pressure and Load Measurement, Legacy Control-System Data Acquisition.

🏭

Industrial Sensor Interfaces

The ADS1286PA fits industrial sensor interfaces that need differential signal acquisition at a controlled power level. Its 12-bit resolution and 37 kS/s conversion rate suit temperature, pressure, position, and process-variable measurements, while differential input helps reject common-mode voltage present on long sensor wiring. The 250 µA nominal supply current is useful in distributed measurement nodes, although a regulated 4.5 V to 5.25 V rail is required. Pair the ADC with a low-noise reference, an instrumentation front end, and symmetrical input routing. Check the analog input range and reference requirements against the sensor output before finalizing the signal chain.

🔋

Battery-Powered Measurement Instruments

The ADS1286PA is useful in battery-powered measurement instruments where low converter consumption and compact digital communication matter. Its nominal 250 µA supply current supports longer operating intervals, and the 37 kS/s conversion rate is sufficient for many slowly changing sensor signals. The 4.5 V to 5.25 V single-supply requirement means the instrument needs an appropriate regulator or boost stage. Use the SPI or SSI-compatible interface to connect the ADC to a low-power controller, and define power states so the converter and interface do not consume energy during idle periods.

🧩

Remote Environmental Monitoring

The ADS1286PA supports remote environmental-monitoring systems that measure low-level signals from distributed temperature, humidity, gas, or soil sensors. Differential input can reduce the effect of common-mode noise encountered along long cable runs, while the 12-bit resolution provides 4096 digital codes for each conversion. The 37 kS/s rate allows periodic readings without requiring a high-speed ADC. Design the enclosure and cable entry to minimize EMI pickup, use a quiet reference, and power the device from a filtered 4.5 V to 5.25 V rail. A microcontroller can use the serial interface to timestamp and process each measurement.

🔧

Laboratory Instrumentation

The ADS1286PA is appropriate for compact laboratory instrumentation that captures slow analog waveforms or sensor outputs with modest resolution. Its 37 kS/s throughput and integrated sample-and-hold amplifier allow the converter to acquire successive measurements without requiring a separate acquisition front end. The 90 dB spurious-free dynamic range is useful when the measured signal must remain distinguishable from noise and distortion. For precision-oriented instruments, verify the reference stability, input bandwidth, and acquisition timing. A through-hole 8-PDIP package also simplifies prototype construction and allows straightforward replacement during laboratory development.

⚖️

Pressure and Load Measurement

The ADS1286PA can digitize outputs from bridge-based pressure, load, and force sensors when the excitation and input range are properly conditioned. Differential measurement reduces sensitivity to supply and ground variations that affect both bridge nodes similarly. Its 12-bit resolution and 37 kS/s rate are suitable for many static or slowly changing physical measurements. Use a regulated bridge excitation and low-noise instrumentation amplifier, and ensure the analog inputs remain within their allowed range under maximum sensor imbalance and fault conditions. Calibration can map the digital codes to engineering units after offset, gain, and nonlinearity compensation.

🖥️

Legacy Control-System Data Acquisition

The ADS1286PA fits legacy industrial control and data-acquisition boards that use through-hole components and require a straightforward serial ADC upgrade path. The 8-PDIP package supports conventional PCB assembly, while the SPI or SSI-compatible interface allows connection to existing microcontrollers or programmable logic. At 37 kS/s, the converter handles general process monitoring rather than high-frequency waveform analysis. A careful migration should confirm the logic levels, clock timing, reference arrangement, and analog input range. Because the device uses a 4.5 V to 5.25 V supply, existing 3.3 V control systems may need level translation or a separate analog supply domain.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ADS1286 Same converter family without the specified PDIP ordering code ব্যবহৃত হয়: Industrial Sensor Interfaces, Battery-Powered Measurement Instruments, Remote Environmental Monitoring, Laboratory Instrumentation, Pressure and Load Measurement, Legacy Control-System Data Acquisition ADS1286PA Texas Instruments ব্যবহৃত হয়: Industrial Sensor Interfaces, Battery-Powered Measurement Instruments, Remote Environmental Monitoring, Laboratory Instrumentation, Pressure and Load Measurement, Legacy Control-System Data Acquisition
What is the conversion rate of ADS1286PA?
The ADS1286PA converts analog input at up to 37 kS/s. According to the Texas Instruments ADS1286 manufacturer datasheet, the device is a 12-bit sampling analog-to-digital converter with an integrated sample-and-hold amplifier. This throughput is appropriate for low-frequency process, sensor, and instrumentation signals where accurate sampling is more important than high-speed waveform capture.
What is the resolution and accuracy of ADS1286PA?
The ADS1286PA provides 12-bit resolution, 1 LSB differential nonlinearity, 2 LSB integral nonlinearity, and 90 dB spurious-free dynamic range. These figures are stated in the Texas Instruments ADS1286 manufacturer datasheet. The 1 LSB differential nonlinearity describes code-width deviation, while the 2 LSB integral nonlinearity describes deviation from the ideal transfer line.
What is the supply voltage of ADS1286PA?
The ADS1286PA operates from a single supply of 4.5 V to 5.25 V. According to the Texas Instruments ADS1286 manufacturer datasheet, its nominal supply current is 250 µA. The device is therefore suited to systems that already provide a regulated 5 V rail and need low-power conversion rather than a wide input-voltage range.
Does ADS1286PA support SPI and SSI communication?
Yes, the ADS1286PA supports SPI and SSI-compatible serial communication over two-wire or three-wire arrangements. The Texas Instruments ADS1286 manufacturer datasheet identifies the serial interface as a defining feature of the converter. Choose the wiring mode that matches the host controller, and observe the required clocking and chip-select timing during each conversion.
Where can I download the ADS1286PA datasheet PDF?
The official ADS1286PA datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads1286.pdf. It contains the device description, electrical characteristics, pin description, timing information, and application guidance. Use the pin-description and connection diagrams when assigning PCB nets or checking the 8-PDIP footprint.
Where can I find the ADS1286PA pinout?
The ADS1286PA pin assignments are shown in the official Texas Instruments ADS1286 manufacturer datasheet. The device uses an 8-PDIP package and includes an integrated sample-and-hold amplifier with a serial interface. Use the datasheet pin-description table when laying out analog inputs, supply, ground, clock, chip-select, and data connections.
Is ADS1286PA suitable for battery-powered sensor systems?
The ADS1286PA is suitable for low-power sensor systems when the source operates from a regulated 4.5 V to 5.25 V rail. Its nominal supply current of 250 µA and differential input architecture help reduce both consumption and susceptibility to common-mode noise. Power-gating around the device can further control energy use between measurements.
What can replace ADS1286PA on the same PCB?
A true direct replacement for ADS1286PA must use the same 8-PDIP footprint, preserve pin assignments, and meet the 12-bit resolution and 37 kS/s conversion-rate requirements. Related ADS1286 devices with SOIC packages are not direct replacements because their physical footprints differ. Use the Request a Quote form on this page to ask for a current same-package sourcing option.
What is the best TI equivalent for ADS1286PA?
ADS1286PA is itself the 8-PDIP configuration of the Texas Instruments ADS1286 family, providing 12-bit resolution, differential input, and a 37 kS/s conversion rate. A related SOIC-package device cannot be treated as a drop-in replacement because it requires different PCB pads. For an assembled design, retain ADS1286PA unless the board is deliberately redesigned.
ADS1286PA versus ADS1286PB: which one is pin compatible?
ADS1286PA and ADS1286PB are not direct PCB drop-ins because their package formats differ: ADS1286PA uses 8-PDIP while ADS1286PB is associated with a surface-mount package configuration. Although both belong to the ADS1286 family and can offer similar conversion performance, changing package type requires new land patterns and different assembly processes.
When should I choose ADS1286PA instead of a surface-mount ADS1286 option?
Choose ADS1286PA when the PCB already uses an 8-PDIP footprint, through-hole assembly is preferred, or the device is being used in prototypes and legacy equipment where soldering surface-mount packages is inconvenient. Its 12-bit resolution, 37 kS/s rate, differential input, and 250 µA nominal current preserve the core ADS1286 measurement function.
Is ADS1286PA suitable for bridge-sensor measurements?
The ADS1286PA is well suited to differential bridge-sensor measurements because its analog input measures between two nodes rather than referenced only to ground. Its 12-bit resolution, 1 LSB differential nonlinearity, and 90 dB spurious-free dynamic range support precise signal capture. Front-end amplification and filtering should be selected for the bridge excitation, common-mode range, and required sensitivity.
How should differential ADC inputs be routed on a PCB?
Route the ADS1286PA differential input pair as a closely coupled pair with similar geometry and a continuous ground reference beneath or nearby. This reduces differential pickup from clocks, switching nodes, and other high-current traces. Place input protection and filtering close to the device, while keeping the analog path away from the SPI clock and digital return currents.
Where can I buy ADS1286PA and check its current lead time?
Use the Request a Quote form on this page to request the current ADS1286PA price, stock position, minimum order quantity, and lead time. The form is the appropriate route for live commercial information because pricing and availability can change independently of the device's technical specifications. Include the required quantity and target package in the request.
What are the key specifications of ADS1286PA that engineers should know?
The ADS1286PA is a 12-bit, single-input SAR ADC with 37 kS/s conversion, differential input, 90 dB spurious-free dynamic range, 1 LSB differential nonlinearity, and 2 LSB integral nonlinearity. It runs from 4.5 V to 5.25 V, consumes 250 µA nominally, supports SPI or SSI communication, and is housed in an 8-PDIP package.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS1286PA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ADS1286PA for a new or existing 8-PDIP design that requires a 12-bit differential ADC, a maximum conversion rate of 37 kS/s, and a nominal supply current of 250 µA. Its SPI or SSI-compatible interface is appropriate for compact sensor instrumentation, environmental monitoring, laboratory equipment, and legacy industrial control boards. The device is particularly convenient when through-hole assembly and manual prototyping are priorities. Do not select ADS1286PB or another surface-mount ADS1286 member as a direct substitution because its footprint, lead geometry, and assembly requirements differ. Likewise, ADS1286UA/2K5 should be selected only after checking its separate package and ordering configuration. If an existing board must remain physically unchanged, confirm the exact 8-PDIP pinout, 4.5 V to 5.25 V supply, logic levels, reference requirements, and analog input range before releasing a replacement order.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Package 8-PDIP
Brand Texas Instruments
Resolution 12 bit
Conversion Rate 37 kS/s
Architecture 1-input SAR ADC
Input Configuration Differential
Supply Voltage Range 4.5 V to 5.25 V
Nominal Supply Current 250 µA
Serial Interface SPI or SSI compatible
Spurious-Free Dynamic Range 90 dB
Differential Nonlinearity 1 LSB
Integral Nonlinearity 2 LSB

মূল পার্থক্যসমূহ

  • Low-power differential conversion in a through-hole package (বনামADS1286PB)
  • Sampling performance for precision-oriented acquisition (বনামADS1286UA/2K5)
  • Direct fit for through-hole industrial and prototype boards (বনামADS1286PB)

ডিজাইন নোট

Route the ADS1286PA differential input pair symmetrically and keep it away from the SPI clock, switching-node traces, and high-current return paths. A continuous ground plane beneath the pair can reduce differential coupling, but avoid interrupting that plane with high-impedance routing. Place the input protection network and anti-alias filter close to pins 1 and 2 so that switching transients are attenuated before reaching the sample-and-hold amplifier.

Operate the converter from a clean 4.5 V to 5.25 V supply and decouple the supply pins with local high-frequency bypass capacitance. Keep analog and digital return currents separated until they join at the device ground connection, particularly when the SPI controller is located far from the ADC. Since the nominal supply current is 250 µA, cable resistance and long supply traces can create measurable voltage offsets in distributed systems.

Do not substitute a surface-mount member of the ADS1286 family without redesigning the PCB footprint. Package compatibility is determined by physical lead spacing, row geometry, pin numbering, and pin functions; identical resolution and conversion rate alone do not establish drop-in status. Also verify the analog input range, reference connection, and logic levels before replacing ADS1286PA on an existing assembly.

Choose the input filter according to the required bandwidth rather than only the maximum conversion rate. At 37 kS/s, an unnecessarily wide bandwidth admits more out-of-band noise into the sample-and-hold amplifier and can degrade spurious-free performance. Use the manufacturer datasheet for acquisition timing and test the completed layout with the intended source impedance, cable length, reference arrangement, and system clock.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product information. AEC-Q100 qualification is not applicable to the identified industrial ADC ordering configuration.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADS1286PA datasheet ADS1286PA datasheet pdf ADS1286PA pinout ADS1286PA 12 bit ADC ADS1286PA 37 kS/s ADS1286PA 8-PDIP Texas Instruments ADS1286PA ADS1286PA equivalent ADS1286PA replacement ADS1286PA vs ADS1286PB ADS1286PA price ADS1286PA application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments ADS1286PA ADS1286 ADS1286PB ADS1286UA/2K5 analog-to-digital converter ADC sampling ADC successive approximation ADC SAR ADC differential input sample-and-hold amplifier SPI SSI serial interface 12-bit resolution 37 kS/s conversion rate 250 µA supply current spurious-free dynamic range differential nonlinearity integral nonlinearity 8-PDIP PDIP package family through-hole technology surface mount SMD bridge sensor industrial sensor interface environmental monitoring precision measurement
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন