Texas Instruments

ADS823EG4 - 10-Bit 60 MSPS ADC | Texas Instruments | SSOP-28

MPN: ADS823EG4 ✓ সক্রিয়
28-pin SSOP, 5.30 mm width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADS823EG4 সারাংশ

Texas Instruments ADS823EG4 is a 10-bit, 60 MSPS single-channel analog-to-digital converter with a parallel data interface, housed in a 28-pin SSOP package. It supports single-ended or differential analog inputs, programmable input ranges, and internal or external reference options. The converter operates from -40°C to 85°C and is packaged in a tube for industrial-temperature production.

An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and represents each sample as a digital number. A flash ADC uses internal comparators and resistor networks to implement conversion in parallel. The ADS823EG4 belongs to the ADC, data converter, and signal-processing IC hierarchy, making it suitable for systems that require rapid digitization of a single analog input.

Key characteristics include 10-bit resolution, a 60 MSPS conversion rate, 60 dB signal-to-noise ratio, and 74 dBFS spurious-free dynamic range. Its 265 mW power figure supports power-conscious acquisition designs, while the selectable input topology accommodates both grounded single-ended sources and differential front ends. Programmable input range and low differential nonlinearity of 0.25 LSB are additional functional features.

The parallel interface exposes converted samples directly to digital logic, reducing the need for a serializing stage and making the device appropriate for high-throughput sampling systems. Single-ended or differential operation gives the circuit designer flexibility when handling source impedance, common-mode voltage, and analog signal conditioning. Internal and external reference choices allow the system to balance integration, accuracy, and calibration requirements.

Typical uses include industrial process monitoring, communications-channel digitization, laboratory instrumentation, waveform capture, radar or signal-analysis front ends, and embedded data-acquisition systems. The 60 MSPS rate is suitable for high-bandwidth intermediate-frequency or pulse-related measurements when the analog input is conditioned to preserve full-scale range and avoid clipping.

The primary PCB constraints are clock and analog-signal integrity, reference decoupling, and careful grounding of the 28-pin SSOP footprint. The analog input and reference network should be placed close to the converter, while high-speed digital outputs require short routing with an appropriate return-path arrangement to limit coupling into the sensitive input stage.

This product page organizes the ADS823EG4 specifications, verified drop-in considerations, application guidance, package information, and engineering trade-offs into a practical engineering reference. It also distinguishes the directly interchangeable family options from broader functional equivalents that require design review.

এর জন্য ড্রপ-ইন বিকল্প ADS823EG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ADS828EG4

✅ ড্রপ-ইন
📦 SSOP-28
Conversion rate is 75 MSPS versus 60 MSPS for ADS823EG4, a 25% increase; both are 10-bit devices in the pin-compatible SSOP-28 family.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADS823EG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

রেজোলিউশন 10 bit
স্যাম্পলিং রেট 60 MSPS
Channel Count 1 channel
Converter Architecture Pipelined flash ADC
Data Interface Parallel
Input Type Single-ended or differential
Input Range Programmable
Signal-to-Noise Ratio 60 dB
Spurious-Free Dynamic Range 74 dBFS
Differential Nonlinearity 0.25 LSB
Power Consumption 265 mW
Reference Configuration Internal or external
অপারেটিং তাপমাত্রা -40°C to 85°C
প্যাকেজ 28-pin SSOP, 5.30 mm width
Packaging Tube
Power-Down Feature Supported

ADS823EG4 28-pin ssop, 5.30 mm width পিন কনফিগারেশন গাইড

ADS823EG4 (28-pin ssop, 5.30 mm width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

ADS823EG4-এর জন্য 28-pin ssop, 5.30 mm width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADS823EG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADS823EG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Signal Acquisition, Communications Channel Digitization, Laboratory Waveform Capture, Pulse and Radar Signal Analysis, Medical Monitoring Equipment, Embedded Data-Acquisition System.

🏭

Industrial Process Signal Acquisition

The ADS823EG4 is suitable for digitizing rapidly changing industrial sensor signals when the front end limits bandwidth to the converter's usable input range. Its 10-bit resolution, 60 MSPS sampling rate, and programmable single-ended or differential input support conditioning across different sensor outputs. The -40°C to 85°C operating range suits industrial equipment, while parallel data output can feed a controller or capture device directly. Designers should preserve the 0.25 LSB differential-nonlinearity performance by using a stable reference and controlled source impedance.

🌐

Communications Channel Digitization

ADS823EG4 can serve as the sampling ADC in a communications receiver or intermediate-frequency processing path. Its 60 MSPS rate and 10-bit output provide sufficient temporal resolution for selected baseband or IF signals, while the parallel interface supports direct connection to digital processing logic. The 74 dBFS SFDR and 60 dB SNR are important when weak spectral content must remain distinguishable from harmonics and noise. Input filtering must suppress out-of-band energy before the 10-bit converter, and the clock source should provide low jitter.

🔧

Laboratory Waveform Capture

The ADS823EG4 is appropriate for laboratory instruments that need compact, high-rate acquisition of a single analog waveform. At 60 MSPS, it can capture substantially more points than a low-speed precision ADC while retaining a simple parallel output arrangement. The 28-pin SSOP package supports board-space-constrained instruments, and the 265 mW power figure helps limit thermal load in compact equipment. A practical design should include adjustable input gain, DC offset control, anti-alias filtering, and a clock derived from a stable source.

✈️

Pulse and Radar Signal Analysis

ADS823EG4 can digitize pulsed or radar-related waveforms when the selected sampling rate covers the required signal bandwidth. A 60 MSPS sampling rate provides 16.7 ns between samples, which is valuable for timing, amplitude, and envelope analysis. Differential input can improve common-mode rejection in systems with noisy analog references, while programmable ranges accommodate different detector outputs. The converter's 60 dB SNR and 74 dBFS SFDR must be considered alongside front-end gain, filtering, and the dynamic range required by the weakest return.

💊

Medical Monitoring Equipment

ADS823EG4 may be used in specialized medical monitoring modules when a single rapidly varying analog channel must be digitized near the instrument's input. Its selectable differential or single-ended input allows the module to work with different sensor-conditioning topologies, and programmable ranges help maximize converter utilization. The 10-bit resolution is suitable only when the system noise floor and analog gain support the required accuracy. Medical-system designers must also address isolation, patient protection, input saturation, and regulatory requirements outside the ADC itself.

🧩

Embedded Data-Acquisition System

ADS823EG4 is suitable for an embedded acquisition subsystem requiring rapid local sampling and direct digital handoff. Its parallel bus permits samples to be captured by an FPGA or other digital controller without an intermediate serializing ADC. The 60 MSPS rate can monitor fast transients, vibration-related signals, or high-bandwidth sensor channels after appropriate conditioning. The SSOP-28 footprint and 265 mW device power are useful in compact systems, but routing length, output load, thermal rise, and decoupling must be checked as part of the controller interface design.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ADS826EG4 Same ADS82x high-speed ADC family ব্যবহৃত হয়: Industrial Process Signal Acquisition, Communications Channel Digitization, Laboratory Waveform Capture, Pulse and Radar Signal Analysis, Medical Monitoring Equipment, Embedded Data-Acquisition System ADS828EG4 Pin-compatible 10-bit family ADC ব্যবহৃত হয়: Industrial Process Signal Acquisition, Communications Channel Digitization, Laboratory Waveform Capture, Pulse and Radar Signal Analysis, Medical Monitoring Equipment, Embedded Data-Acquisition System
What are the key specifications of ADS823EG4 that engineers should know?
The ADS823EG4 is a 10-bit, 60 MSPS single-channel pipelined flash ADC with a parallel interface and a 28-pin SSOP package. According to the Texas Instruments ADS823 datasheet, it provides 60 dB SNR, 74 dBFS SFDR, 0.25 LSB differential nonlinearity, and 265 mW power consumption. It accepts single-ended or differential inputs, supports programmable input ranges, and offers internal or external reference options for acquisition and signal-analysis designs.
What is the sampling rate and resolution of ADS823EG4?
The ADS823EG4 converts at 60 MSPS with 10-bit resolution. According to the Texas Instruments ADS823 datasheet, this combination provides one sample every 16.7 ns and a theoretical parallel-code width of 10 bits. It is intended for high-speed signal acquisition rather than slow precision measurement, making clock quality, input bandwidth, and output timing central design considerations.
Does ADS823EG4 support both single-ended and differential inputs?
Yes, the ADS823EG4 supports single-ended and differential analog inputs. According to the Texas Instruments ADS823 datasheet, the input range is programmable, which allows the analog front end to be scaled around the converter's full-scale range. Differential operation can improve rejection of common-mode noise, while single-ended operation simplifies circuits driven from a grounded or unipolar source.
Where can I download the ADS823EG4 datasheet PDF?
The manufacturer datasheet is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads823.pdf. It contains the electrical characteristics, timing definitions, pin descriptions, input-range tables, reference arrangements, and application information needed for PCB and signal-chain design. Use the pin-description table and interface timing diagrams when assigning tracks in the 28-pin SSOP footprint.
Where is the pinout for ADS823EG4?
The ADS823EG4 pinout is defined in the Texas Instruments ADS823 datasheet and follows the 28-pin SSOP numbering used by the package diagram. The device uses parallel digital outputs, analog inputs, reference connections, clock pins, power pins, and control signals. Use the manufacturer's pin-description table when assigning every PCB track and preserve the exposed device orientation indicated by the package marking.
What is the best drop-in replacement for ADS823EG4?
The ADS828EG4 is the strongest verified family alternative because it is a 10-bit converter in an SSOP-28 package and is identified as pin-compatible with the ADS823. According to the cross-reference information, ADS828 operates at 75 MSPS, 15 MSPS faster than the 60 MSPS ADS823EG4. Confirm output timing, power behavior, and analog input-range requirements before treating it as a production replacement.
Can ADS828EG4 replace ADS823EG4 without a PCB change?
ADS828EG4 can be considered for the same SSOP-28 footprint because the cross-reference identifies the ADS828 as pin-compatible with the ADS823 family. Its conversion rate is 75 MSPS compared with 60 MSPS for ADS823EG4, a 25% increase. The shared 10-bit resolution and package support replacement, but verify acquisition timing and analog full-scale specifications in the manufacturer datasheet.
What can replace ADS823EG4 in an SSOP-28 design?
ADS828EG4 is the verified same-footprint family candidate for ADS823EG4. It retains 10-bit resolution, uses an SSOP-28 package, and is listed as pin-compatible with the ADS823 family. The primary difference is its 75 MSPS rate versus 60 MSPS for ADS823EG4. Other ADS820-family devices may offer functional similarity, but they require individual resolution, speed, interface, and timing checks.
When should I choose ADS823EG4 over ADS828EG4?
Choose ADS823EG4 when 60 MSPS operation, the established ADS823 timing, and the specified input behavior are more important than obtaining the fastest conversion rate in the family. Choose ADS828EG4 when its 75 MSPS capability is needed and its datasheet confirms equivalent SSOP-28 timing and signal requirements. The 15 MSPS rate difference can change output timing requirements even though both devices use 10-bit resolution and the same package family.
Is ADS823EG4 suitable for industrial data acquisition?
The ADS823EG4 is rated for -40°C to 85°C operation and is identified as an industrial-temperature, single-channel 60 MSPS ADC. Its programmable input range and selectable single-ended or differential topology support industrial acquisition systems. The complete signal chain must still provide adequate analog bandwidth, low-noise referenceing, grounding, and protection for the sensor or transducer being measured.
What is the ADS823EG4 power consumption?
The ADS823EG4 consumes 265 mW under the conditions reported for the device. According to the Texas Instruments ADS823 datasheet, the converter also includes a power-down capability. Actual board-level consumption depends on clock rate, reference configuration, output state, supply voltage, and the selected analog mode, so these operating conditions should be fixed before comparing the design against a power budget.
Is ADS823EG4 in stock and what is its lead time?
Current stock and manufacturing lead time change frequently and should be confirmed through the Request a Quote form on this page. The product is supplied in a tube according to the manufacturer and distributor records, so the requested quantity must also be matched to the available package format. XAIPART will confirm current availability, lead time, and order handling before shipment.
Where can I buy ADS823EG4 online?
ADS823EG4 can be requested through the Request a Quote form on this XAIPART product page. The inquiry should state the required quantity, tube packaging requirement, acceptable lead time, and destination country. Current commercial terms are confirmed with the quotation rather than embedded in static page content, allowing the order to reflect the requested quantity and supply conditions.
What is the price of ADS823EG4?
Use the Request a Quote form on this page for the current ADS823EG4 commercial terms. Pricing can vary with quantity, tube packaging, market conditions, and supply availability. The request form captures the required part number and quantity so a current quotation can be prepared without relying on a stale price table.
How does ADS823EG4 compare with ADS828EG4 for signal processing?
ADS823EG4 and ADS828EG4 both provide 10-bit conversion in an SSOP-28 package, and the cross-reference identifies them as pin-compatible family options. ADS828EG4 converts at 75 MSPS, compared with 60 MSPS for ADS823EG4, while ADS823EG4 is listed at 265 mW power consumption. Choose based on required bandwidth, verified output timing, input-range behavior, and power conditions rather than resolution alone.
Does ADS823EG4 meet RoHS and automotive qualification requirements?
The available technical records do not establish a RoHS declaration or AEC-Q100 qualification for ADS823EG4. Treat RoHS status as unknown until the manufacturer or an authorized supply record provides a declaration. The device is specified for industrial temperatures, but industrial temperature rating is not equivalent to AEC-Q100 qualification and should not be used as evidence of automotive compliance.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS823EG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ADS823EG4 when the design requires a 10-bit, 60 MSPS parallel ADC in an SSOP-28 package and the ADS823 timing and input behavior are already validated. It is well suited to industrial acquisition, communications-channel digitization, pulse measurement, and embedded waveform capture. Choose ADS828EG4 when the same verified 10-bit SSOP-28 family can provide a higher sampling rate: its 75 MSPS rate provides a 13.3 ns sampling interval, but the faster edge rate may change timing, clock, and power expectations. Other ADS82x-family devices can be functionally similar without being true drop-in choices because resolution, conversion rate, interface, and timing requirements must agree. Before substitution, compare the manufacturer pin table, acquisition timing, input range, reference behavior, supply requirements, and power consumption against the existing board.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADS828EG4
Manufacturer Texas Instruments Texas Instruments
Package SSOP-28 SSOP-28
Resolution 10 bit 10 bit
Sampling Rate 60 MSPS 75 MSPS
Sampling Interval 16.7 ns 13.3 ns

মূল পার্থক্যসমূহ

  • Established 60 MSPS operating point within the ADS82x family (বনামADS828EG4)
  • 10-bit parallel conversion with configurable analog input (বনামADS828EG4)
  • Defined 265 mW device power figure (বনামADS828EG4)

ডিজাইন নোট

Treat the clock and analog inputs as high-speed signals. Place the clock input, reference components, and analog input network close to the ADS823EG4, use a low-jitter clock source, and avoid routing the clock parallel to sensitive input traces. Short ground-return paths and a continuous ground plane help control common-mode coupling into the 60 dB SNR system.

Use the manufacturer's pin-description table and reference layout for decoupling, reference components, and analog-input connections. Place input and reference bypass capacitors at their associated device pins rather than at a remote power entry point. Verify the SSOP-28 land pattern, exposed terminal requirements, solder mask, and copper clearance against the current Texas Instruments package drawing before fabrication.

Budget for the 265 mW converter consumption plus reference, clock, and downstream digital-interface power. Distributed supply and ground planes can reduce voltage loss across the SSOP pins, especially when output lines switch at the 60 MSPS conversion rate. Confirm supply sequencing, bypass capacitance, and output-driver loading using the operating conditions specified by the manufacturer.

Do not treat the 10-bit code width as the system's complete resolution. Source noise, reference error, gain error, bandwidth limitations, and missing code behavior can each reduce usable accuracy. Calibrate gain and offset, preserve the analog headroom, and include anti-alias filtering before sampling so out-of-band energy does not consume converter dynamic range.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The industrial temperature rating does not by itself establish AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available manufacturer and distributor records.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADS823EG4 datasheet ADS823EG4 pinout ADS823EG4 datasheet pdf ADS823EG4 equivalent ADS823EG4 replacement ADS823EG4 cross reference ADS823EG4 vs ADS828EG4 ADS823EG4 SSOP-28 footprint Texas Instruments ADS823EG4 ADS823EG4 10-bit 60 MSPS ADS823EG4 parallel ADC ADS823EG4 price ADS823EG4 stock ADS823EG4 signal acquisition ADS823EG4 drop-in replacement

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments ADS823EG4 ADS828EG4 ADS826EG4 ADS822 ADS824 ADS825 ADS828 ADC analog-to-digital converter flash ADC pipelined ADC data converter signal-processing IC 10-bit resolution 60 MSPS parallel data interface single-ended input differential input programmable input range internal reference external reference signal-to-noise ratio spurious-free dynamic range SSOP-28 surface-mount package
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন