ADS823EG4 - 10-Bit 60 MSPS ADC | Texas Instruments | SSOP-28
MPN: ADS823EG4 ✓ 啟用中ADS823EG4 概覽
An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and represents each sample as a digital number. A flash ADC uses internal comparators and resistor networks to implement conversion in parallel. The ADS823EG4 belongs to the ADC, data converter, and signal-processing IC hierarchy, making it suitable for systems that require rapid digitization of a single analog input.
Key characteristics include 10-bit resolution, a 60 MSPS conversion rate, 60 dB signal-to-noise ratio, and 74 dBFS spurious-free dynamic range. Its 265 mW power figure supports power-conscious acquisition designs, while the selectable input topology accommodates both grounded single-ended sources and differential front ends. Programmable input range and low differential nonlinearity of 0.25 LSB are additional functional features.
The parallel interface exposes converted samples directly to digital logic, reducing the need for a serializing stage and making the device appropriate for high-throughput sampling systems. Single-ended or differential operation gives the circuit designer flexibility when handling source impedance, common-mode voltage, and analog signal conditioning. Internal and external reference choices allow the system to balance integration, accuracy, and calibration requirements.
Typical uses include industrial process monitoring, communications-channel digitization, laboratory instrumentation, waveform capture, radar or signal-analysis front ends, and embedded data-acquisition systems. The 60 MSPS rate is suitable for high-bandwidth intermediate-frequency or pulse-related measurements when the analog input is conditioned to preserve full-scale range and avoid clipping.
The primary PCB constraints are clock and analog-signal integrity, reference decoupling, and careful grounding of the 28-pin SSOP footprint. The analog input and reference network should be placed close to the converter, while high-speed digital outputs require short routing with an appropriate return-path arrangement to limit coupling into the sensitive input stage.
This product page organizes the ADS823EG4 specifications, verified drop-in considerations, application guidance, package information, and engineering trade-offs into a practical engineering reference. It also distinguishes the directly interchangeable family options from broader functional equivalents that require design review.
直接替換替代品,適用於 ADS823EG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ADS828EG4
✅ 直接替換📋 參考替代品(不在目錄中)
ADS823EG4 最大額定值與電氣特性
| 解析度 | 10 bit |
| 取樣率 | 60 MSPS |
| Channel Count | 1 channel |
| Converter Architecture | Pipelined flash ADC |
| Data Interface | Parallel |
| Input Type | Single-ended or differential |
| Input Range | Programmable |
| Signal-to-Noise Ratio | 60 dB |
| Spurious-Free Dynamic Range | 74 dBFS |
| Differential Nonlinearity | 0.25 LSB |
| Power Consumption | 265 mW |
| Reference Configuration | Internal or external |
| 工作溫度 | -40°C to 85°C |
| 封裝 | 28-pin SSOP, 5.30 mm width |
| Packaging | Tube |
| Power-Down Feature | Supported |
ADS823EG4 28-pin ssop, 5.30 mm width 腳位配置指南
ADS823EG4(28-pin ssop, 5.30 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS823EG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS823EG4 適用於 6 應用s: Industrial Process Signal Acquisition, Communications Channel Digitization, Laboratory Waveform Capture, Pulse and Radar Signal Analysis, Medical Monitoring Equipment, Embedded Data-Acquisition System.
Industrial Process Signal Acquisition
The ADS823EG4 is suitable for digitizing rapidly changing industrial sensor signals when the front end limits bandwidth to the converter's usable input range. Its 10-bit resolution, 60 MSPS sampling rate, and programmable single-ended or differential input support conditioning across different sensor outputs. The -40°C to 85°C operating range suits industrial equipment, while parallel data output can feed a controller or capture device directly. Designers should preserve the 0.25 LSB differential-nonlinearity performance by using a stable reference and controlled source impedance.
推薦
Communications Channel Digitization
ADS823EG4 can serve as the sampling ADC in a communications receiver or intermediate-frequency processing path. Its 60 MSPS rate and 10-bit output provide sufficient temporal resolution for selected baseband or IF signals, while the parallel interface supports direct connection to digital processing logic. The 74 dBFS SFDR and 60 dB SNR are important when weak spectral content must remain distinguishable from harmonics and noise. Input filtering must suppress out-of-band energy before the 10-bit converter, and the clock source should provide low jitter.
推薦
Laboratory Waveform Capture
The ADS823EG4 is appropriate for laboratory instruments that need compact, high-rate acquisition of a single analog waveform. At 60 MSPS, it can capture substantially more points than a low-speed precision ADC while retaining a simple parallel output arrangement. The 28-pin SSOP package supports board-space-constrained instruments, and the 265 mW power figure helps limit thermal load in compact equipment. A practical design should include adjustable input gain, DC offset control, anti-alias filtering, and a clock derived from a stable source.
推薦
Pulse and Radar Signal Analysis
ADS823EG4 can digitize pulsed or radar-related waveforms when the selected sampling rate covers the required signal bandwidth. A 60 MSPS sampling rate provides 16.7 ns between samples, which is valuable for timing, amplitude, and envelope analysis. Differential input can improve common-mode rejection in systems with noisy analog references, while programmable ranges accommodate different detector outputs. The converter's 60 dB SNR and 74 dBFS SFDR must be considered alongside front-end gain, filtering, and the dynamic range required by the weakest return.
推薦
Medical Monitoring Equipment
ADS823EG4 may be used in specialized medical monitoring modules when a single rapidly varying analog channel must be digitized near the instrument's input. Its selectable differential or single-ended input allows the module to work with different sensor-conditioning topologies, and programmable ranges help maximize converter utilization. The 10-bit resolution is suitable only when the system noise floor and analog gain support the required accuracy. Medical-system designers must also address isolation, patient protection, input saturation, and regulatory requirements outside the ADC itself.
推薦
Embedded Data-Acquisition System
ADS823EG4 is suitable for an embedded acquisition subsystem requiring rapid local sampling and direct digital handoff. Its parallel bus permits samples to be captured by an FPGA or other digital controller without an intermediate serializing ADC. The 60 MSPS rate can monitor fast transients, vibration-related signals, or high-bandwidth sensor channels after appropriate conditioning. The SSOP-28 footprint and 265 mW device power are useful in compact systems, but routing length, output load, thermal rise, and decoupling must be checked as part of the controller interface design.
推薦
推薦產品摘要
工程參考資料,適用於 ADS823EG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS828EG4 |
|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments |
| Package | SSOP-28 | SSOP-28 |
| Resolution | 10 bit | 10 bit |
| Sampling Rate | 60 MSPS | 75 MSPS |
| Sampling Interval | 16.7 ns | 13.3 ns |
主要差異化特點
- Established 60 MSPS operating point within the ADS82x family (對比ADS828EG4)
- 10-bit parallel conversion with configurable analog input (對比ADS828EG4)
- Defined 265 mW device power figure (對比ADS828EG4)
設計說明
Treat the clock and analog inputs as high-speed signals. Place the clock input, reference components, and analog input network close to the ADS823EG4, use a low-jitter clock source, and avoid routing the clock parallel to sensitive input traces. Short ground-return paths and a continuous ground plane help control common-mode coupling into the 60 dB SNR system.
Use the manufacturer's pin-description table and reference layout for decoupling, reference components, and analog-input connections. Place input and reference bypass capacitors at their associated device pins rather than at a remote power entry point. Verify the SSOP-28 land pattern, exposed terminal requirements, solder mask, and copper clearance against the current Texas Instruments package drawing before fabrication.
Budget for the 265 mW converter consumption plus reference, clock, and downstream digital-interface power. Distributed supply and ground planes can reduce voltage loss across the SSOP pins, especially when output lines switch at the 60 MSPS conversion rate. Confirm supply sequencing, bypass capacitance, and output-driver loading using the operating conditions specified by the manufacturer.
Do not treat the 10-bit code width as the system's complete resolution. Source noise, reference error, gain error, bandwidth limitations, and missing code behavior can each reduce usable accuracy. Calibrate gain and offset, preserve the analog headroom, and include anti-alias filtering before sampling so out-of-band energy does not consume converter dynamic range.
合規資訊
The industrial temperature rating does not by itself establish AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available manufacturer and distributor records.