Texas Instruments

ADS8343EB - 16-Bit 4-Channel ADC | Texas Instruments

MPN: ADS8343EB ✓ সক্রিয়
500 mV to VCC/2 Vdss SSOP-16 Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADS8343EB সারাংশ

The Texas Instruments ADS8343EB is a 16-bit, four-channel serial-output sampling analog-to-digital converter with a 100 kHz conversion rate, 86 dB SINAD, and an SSOP-16 package. It supports four single-ended inputs or two differential inputs, operates from a single supply, and uses a synchronous serial interface for compact data acquisition systems.

A sampling ADC is a category of analog-to-digital converter that samples an analog input and converts each sample into a digital code. The ADS8343 belongs to the sampling ADC hierarchy within data-converter ICs, where its onboard multiplexer selects among analog channels before conversion. Its four-channel architecture reduces the need for external analog switches in portable instruments, battery-powered recorders, and remote measurement equipment.

The principal features include 16-bit resolution, four selectable analog inputs, differential or single-ended operation, a 100 kHz conversion rate, and 86 dB signal-to-noise-plus-distortion ratio. The reference voltage can range from 500 mV to half the supply voltage, while the corresponding bipolar input range is ±VREF. A shutdown mode further reduces consumption when acquisition is paused.

Internally, the device uses a successive-approximation-register conversion architecture combined with an onboard multiplexer. Its synchronous serial interface supports communication with a compact embedded controller while enabling isolation between the analog front end and the digital control side. Typical power dissipation is 8 mW at a 100 kHz throughput rate with a 5 V supply, making the converter suitable for portable and battery-operated systems.

Typical applications include portable multichannel data loggers, personal digital assistant equipment, precision measurement instruments, industrial panel meters, battery-powered environmental monitors, and remote data-acquisition nodes. The 100 kHz throughput supports continuous monitoring of several relatively slow-changing analog signals without requiring a fast external multiplexer.

Designers should pay close attention to reference-voltage stability, input-range selection, source impedance, and the relationship between sample rate, signal bandwidth, and filter requirements. Place the reference and decoupling capacitors close to the associated pins, and route analog inputs away from high-current digital switching paths. The SSOP-16 footprint also requires careful assembly planning because its lead pitch is narrow.

This product page combines the manufacturer’s electrical specifications with practical channel-selection, reference, layout, and replacement guidance. It also distinguishes true pin-compatible alternatives from converter families that require a different package or pin count, helping engineers evaluate migration paths without changing the PCB footprint.

এর জন্য ড্রপ-ইন বিকল্প ADS8343EB — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADS8343EB (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Typical Power Dissipation, Resolution, Conversion Rate, Number of Input Channels.

Texas Instruments
Package: SSOP-16 (QSOP-16)
Resolution: 12 bits (also 8-bit mode)
Number of Input Channels: 4 single-ended / 2 differential
Texas Instruments
Typical Power Dissipation: 8 mW at 100 kHz throughput and 5 V supply
এর সাথে তুলনা করুন ADS8343EB →
Texas Instruments
Package: 16-pin SSOP
Typical Power Dissipation: 8 mW at 100 kSPS and 5 V supply
Conversion Rate: 100 kSPS
এর সাথে তুলনা করুন ADS8343EB →
Texas Instruments
Number of Input Channels: 4 single-ended / 2 differential

ADS8343EB/2K5

✅ ড্রপ-ইন
Texas Instruments
📦 SSOP-16
16 bit · 4 single-ended / 2 differential · SAR (Successive Approximation) · 100 kHz max · 86 dB · 2.7 V to 5 V · < 1 µA

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADS8341E

✅ ড্রপ-ইন
Texas Instruments
📦 SSOP-16
16 bit · 4 single-ended or 2 differential channels · 100 kHz · 86 dB SINAD · Successive-approximation sampling ADC · Synchronous serial interface · 5 V · 8 mW at 100 kHz throughput and 5 V supply

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADS7841E/2K5G4

✅ ড্রপ-ইন
Texas Instruments
📦 SSOP-16
12 bits (also 8-bit mode) · 4 single-ended / 2 differential · SAR (Successive Approximation Register) · 200 kHz (max) · 3.75 us · ±1 LSB · ±1 LSB · None (12-bit guaranteed)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADS8343E

✅ ড্রপ-ইন
Texas Instruments
📦 SSOP-16
Successive-approximation sampling ADC · 16 bit · 100 kSPS · 4 channels · 4 channels · 2 channels · 86 dB SINAD · Bipolar, ±VREF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADS8343EB সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Sampling successive-approximation-register ADC
রেজোলিউশন 16 bit
Number of Input Channels 4 single-ended or 2 differential
Conversion Rate 100 kHz
Signal-to-Noise Plus Distortion Ratio 86 dB
Input Architecture Onboard 4-channel multiplexer
Input Range ±VREF
Reference Voltage Range 500 mV to VCC/2
Supply Configuration Single supply
Typical Power Dissipation 8 mW at 100 kHz throughput with 5 V supply
Serial Interface Synchronous serial interface
Shutdown Mode Supported
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
প্যাকেজ SSOP-16
মাউন্টিং টাইপ Surface mount

ADS8343EB পিন কনফিগারেশন

SSOP-16 Package Pinout Diagram SSOP-16 3.9x6.0mm, P0.635mm, JEDEC MO-150. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SSOP-16
পিন 1 REF+ — Positive external reference input
পিন 2 REF- — Negative external reference input
পিন 3 AIN0 — Analog input channel 0
পিন 4 AIN1 — Analog input channel 1
পিন 5 AIN2 — Analog input channel 2
পিন 6 AIN3 — Analog input channel 3
পিন 7 COM — Analog common reference
পিন 8 V- — Negative supply or ground connection
পিন 9 DGND — Digital ground
পিন 10 CS — Active-low chip-select input
পিন 11 SCLK — Serial clock input
পিন 12 DOUT — Serial data output
পিন 13 DIN — Serial data input
পিন 14 SYNC — Synchronization input
পিন 15 V+ — Positive supply input
পিন 16 NC — Not connected

সাধারণ ব্যবহার

ADS8343EB এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Multichannel Data Logger, Battery-Powered Environmental Monitor, Precision Measurement Instrument, Remote Data-Acquisition Node, Industrial Panel Meter, Handheld Instrument with Multi-Sensor Front End.

📱

Portable Multichannel Data Logger

The ADS8343EB fits portable data loggers that monitor several slowly changing sensor outputs from a battery-powered enclosure. Its four-channel multiplexer reduces the number of external analog switches, while 16-bit resolution preserves fine amplitude detail. At the documented 100 kHz maximum throughput, the converter can acquire multiple channels sequentially without requiring a separate multiplexer IC. The 8 mW typical power dissipation at 100 kHz with a 5 V supply also limits thermal and battery load, although shutdown mode should be enabled during idle periods to reduce consumption further.

🧩

Battery-Powered Environmental Monitor

The ADS8343EB is appropriate for environmental monitoring systems combining temperature, humidity, pressure, and other analog sensors. Its four single-ended inputs allow several sensor signals to share one converter, while two-channel differential operation is useful when the sensor produces a centered differential output around the reference voltage. The 16-bit resolution and 86 dB SINAD specification support measurements where sensor output changes are small relative to the full-scale input range. Shutdown mode can be used between measurement bursts to lower average system power.

🏭

Precision Measurement Instrument

The ADS8343EB supports laboratory and industrial measurement instruments that acquire several analog channels through a synchronous serial data path. Sixteen-bit resolution and 86 dB SINAD provide a strong starting point for precision measurement, while the 100 kHz conversion rate covers many sensor, transducer, and process-control signals. Differential input operation can improve rejection of common-mode noise when paired with suitable input circuitry. Reference stability and source impedance remain critical because both directly influence conversion accuracy and the usable input bandwidth.

🌐

Remote Data-Acquisition Node

The ADS8343EB is suitable for a remote acquisition node that gathers local analog measurements before transferring them through an isolated or embedded serial communications link. Its synchronous serial interface simplifies connection to a controller, and the serial format can support low-cost isolation between the measurement section and the communications electronics. Four single-ended or two differential input choices make it useful for compact multi-sensor nodes. Designers should keep analog routing away from isolation barriers and switching circuitry to preserve the converter’s 86 dB SINAD capability.

📺

Industrial Panel Meter

The ADS8343EB can serve as the acquisition element in a multi-range industrial panel meter or process monitor. The onboard four-channel multiplexer accepts several sensor or divider signals without an external analog switch, reducing board area and leakage-related concerns. The 16-bit code width is useful when displaying slowly varying process values with sufficient resolution, and the 100 kHz conversion rate is more than adequate for common panel-meter update rates. A stable reference, input protection network, and properly designed low-pass filter are essential for reliable field operation.

💊

Handheld Instrument with Multi-Sensor Front End

The ADS8343EB fits handheld instruments that combine analog sensor acquisition with embedded control and a serial display or communications interface. Its four-channel analog multiplexer and SSOP-16 package conserve board area, while 16-bit resolution is valuable for pressure, position, biomedical, or calibration signals whose useful variation occupies only a small part of the input range. The converter’s 8 mW typical operating power supports portable operation, but shutdown sequencing, reference startup, and filtering should be coordinated with the rest of the low-power system.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ADS8343 Parent ADC family ব্যবহৃত হয়: Portable Multichannel Data Logger, Battery-Powered Environmental Monitor, Precision Measurement Instrument, Remote Data-Acquisition Node, Industrial Panel Meter, Handheld Instrument with Multi-Sensor Front End ADS8341 Same-manufacturer multichannel sampling ADC ব্যবহৃত হয়: Portable Multichannel Data Logger, Precision Measurement Instrument, Industrial Panel Meter ADS7841 Pin-compatible multichannel ADC option ব্যবহৃত হয়: Battery-Powered Environmental Monitor, Remote Data-Acquisition Node, Handheld Instrument with Multi-Sensor Front End
What are the key specifications of ADS8343EB that engineers should know?
The ADS8343EB is a 16-bit, four-channel sampling ADC with a 100 kHz conversion rate, 86 dB SINAD, and an SSOP-16 package. According to the Texas Instruments ADS8343 datasheet, it accepts four single-ended or two differential inputs, supports a reference voltage from 500 mV to VCC/2, and provides a bipolar input range of ±VREF. Typical power dissipation is 8 mW when operating at 100 kHz throughput from a 5 V supply, making it appropriate for portable multichannel measurement systems.
Where to download the ADS8343EB datasheet PDF?
The official ADS8343EB datasheet PDF is available from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/ads8343.pdf. The document covers the four-channel sampling architecture, input-range and reference configuration, serial interface, electrical characteristics, package information, and typical application circuits. Use the pin-description table and application diagrams when assigning PCB nets and selecting external reference and bypass components.
Where can I find the ADS8343EB pinout and SSOP-16 footprint?
The ADS8343EB uses a 16-pin SSOP package, and its complete pin assignment is defined in the Texas Instruments ADS8343 datasheet. Use the manufacturer’s pin-description table when connecting REF+, REF−, AIN0 through AIN3, COM, supply, ground, chip-select, clock, data, and control signals. The SSOP-16 footprint is also identified on the Texas Instruments part-details page at https://www.ti.com/product/ADS8343/part-details/ADS8343EB.
What is the input voltage range of ADS8343EB?
The ADS8343EB accepts a bipolar input range of ±VREF, with the reference voltage programmable from 500 mV to VCC/2. This lets the converter support either four single-ended inputs or two differential inputs. According to the Texas Instruments ADS8343 datasheet, the reference-to-input relationship determines the full-scale conversion range, so the reference implementation directly controls measurement sensitivity and common-mode headroom.
How fast can ADS8343EB perform conversions?
The ADS8343EB supports conversion rates up to 100 kHz. Its four-channel onboard multiplexer lets one converter sample several analog inputs without an external analog switch. According to the Texas Instruments ADS8343 datasheet, typical power dissipation is 8 mW at the 100 kHz throughput rate with a 5 V supply. For high-frequency inputs, include an appropriate anti-alias filter and verify the required acquisition time at the selected source impedance.
Is ADS8343EB suitable for battery-powered measurement equipment?
The ADS8343EB is suitable for battery-powered multichannel measurement equipment because its typical power dissipation is 8 mW at 100 kHz throughput with a 5 V supply. It also includes shutdown mode to reduce consumption when conversions are paused. The Texas Instruments ADS8343 datasheet identifies portable data loggers, personal digital assistant equipment, and measurement instruments as suitable applications, particularly where an onboard four-channel multiplexer simplifies the analog front end.
When should I choose ADS8343EB over ADS8341?
Choose ADS8343EB when a four-channel, 16-bit converter with integrated multiplexing is required, particularly for 100 kHz acquisition from several inputs. The ADS8341 is a relevant same-family comparison, but the final selection should be based on its exact ordering code, electrical ratings, pin configuration, and lifecycle status in the manufacturer datasheet. ADS8343EB is preferable when 16-bit resolution and four single-ended or two differential input capability are essential.
ADS8343EB vs ADS8341: which is better for a 16-bit data logger?
ADS8343EB is generally the better match for a 16-bit multichannel data logger because it combines 16-bit resolution with four selectable inputs and a 100 kHz conversion rate. The exact ADS8341 variant must be checked before substitution because resolution, package suffix, and operating ratings can vary by ordering code. For a redesign, compare input ranges, reference limits, serial timing, acquisition time, and the manufacturer’s complete pin descriptions rather than relying only on the family name.
When should I choose ADS8343EB over ADS7841?
Choose ADS8343EB when the design needs 16-bit conversion resolution, four single-ended inputs, two differential inputs, and a documented 100 kHz conversion rate. ADS7841 belongs to the same manufacturer’s pin-compatible ADC family but is associated with lower-resolution conversion, so it should not be selected when the extra ADS8343EB resolution is essential. Validate the exact ADS7841 ordering code and pinout before using it as a replacement.
What is the best drop-in replacement for ADS8343EB?
ADS8343EB/2K5 is the closest documented ordering-code alternative because it retains the 16-pin SSOP package and the same ADS8343 conversion architecture. However, no separate cross-brand drop-in replacement with verified pin and parameter equivalence was identified. Before replacing the component, confirm the package suffix, temperature rating, reference limits, acquisition timing, lifecycle status, and every pin assignment against the manufacturer datasheet rather than treating a similar converter name as sufficient evidence.
Can ADS8343E replace ADS8343EB without PCB changes?
ADS8343E may preserve the SSOP-16 footprint and core ADS8343 functionality, but it should be treated as a conditional replacement until its ordering-code details and pin functions are checked. ADS8343EB identifies a specific device configuration that must be compared against ADS8343E in the Texas Instruments datasheet. Confirm electrical limits, temperature range, marking, and pin compatibility before approving a substitution.
What is the best cross-brand equivalent for ADS8343EB?
No cross-brand drop-in equivalent was verified for the ADS8343EB, so the Texas Instruments part should remain the reference design choice unless a candidate is independently documented. A functionally similar ADC is not automatically interchangeable: it must use the same SSOP-16 footprint, match the 16-bit and 100 kHz requirements, support compatible single-ended and differential input configurations, and provide equivalent reference and serial-interface timing. Use the manufacturer’s cross-reference search and confirm every pin before migration.
What can replace ADS8343EB?
ADS8343EB/2K5 is a documented SSOP-16 alternative in the same ADS8343 family, while ADS8341 and ADS7841 are same-manufacturer candidates for design evaluation. A direct replacement must preserve the footprint and the critical electrical behavior of the target. Review the pin-description table, conversion timing, reference range, input configuration, and exact ordering code before substitution. No cross-brand drop-in part with sufficient documented equivalence was identified.
Is ADS8343EB the same as ADS8343EB/2K5?
ADS8343EB and ADS8343EB/2K5 are closely related orderable versions of the same ADS8343 converter, with the latter carrying an additional tape-and-reel quantity code. Their core conversion function and SSOP-16 package are the same, but procurement should confirm reel quantity, markings, temperature grade, and lifecycle status using the manufacturer’s ordering information. The suffix must be included in the approved BOM and incoming-inspection documentation.
Where to buy ADS8343EB online and what is its current price?
Use the “Request a Quote” form on this page to request ADS8343EB pricing, stock, minimum order quantity, and current lead time. The form connects the request with XAIPART’s quotation process without embedding a static price that can become stale. Provide the exact MPN ADS8343EB, required SSOP-16 reel quantity, destination, target quantity, and any automotive or industrial qualification requirements.
Is ADS8343EB in stock and what is the lead time?
Current ADS8343EB inventory and lead time should be obtained through the “Request a Quote” form on this page. The form allows the required quantity, reel format, and delivery destination to be included in the request so XAIPART can return a current allocation and schedule. For production planning, also obtain a manufacturer-approved lifecycle statement and specify the complete ordering code to avoid accepting an unintended package or temperature variant.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS8343EB — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ADS8343EB when the design requires 16-bit resolution, four single-ended or two differential inputs, and conversion rates up to 100 kHz in an SSOP-16 footprint. It is especially appropriate for portable multichannel loggers, precision instruments, and remote acquisition nodes where low typical operating power and shutdown capability are useful. ADS8343EB/2K5 is the closest documented ordering-code option when its reel quantity and markings meet the procurement plan. ADS8343E may suit an equivalent core configuration after its exact ordering details are confirmed. ADS8341 and ADS7841 are appropriate alternatives only when their lower-resolution performance is acceptable and the complete pin and electrical specifications have been checked. Avoid the ADS8345 family for a direct replacement because its 20-lead SSOP package requires a different PCB footprint.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADS8343EB/2K5 ADS8341 ADS7841 ADS8343E
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-16 SSOP-16 SSOP-16 SSOP-16 SSOP-16
Converter Type Sampling SAR ADC Sampling SAR ADC Sampling SAR ADC Sampling SAR ADC Sampling SAR ADC
Conversion Rate 100 kHz 100 kHz 100 kHz 100 kHz 100 kHz

মূল পার্থক্যসমূহ

  • Higher conversion resolution within the compatible family (বনামADS7841)
  • Documented multichannel and high-speed capability (বনামADS8341)
  • Integrated input multiplexing reduces front-end complexity (বনামADS8343E)

ডিজাইন নোট

The manufacturer reports 8 mW typical power dissipation at 100 kHz throughput with a 5 V supply. Enable shutdown mode when continuous conversion is unnecessary, and account for reference current in the total supply budget. Because VREF may range from 500 mV to VCC/2, verify that the selected reference supports the required input range while maintaining adequate headroom for the chosen supply voltage.

Place the reference-decoupling network and supply bypass capacitors close to REF+, REF−, V+, and ground pins. Route AIN0 through AIN3 away from SCLK, SYNC, and other fast digital nets, and provide a solid ground plane with short return paths. A low-pass input network can control aliasing and high-frequency noise, but its resistance must be low enough to meet the acquisition-time requirements of the selected conversion rate.

Do not substitute the ADS8343 based on resolution and sample rate alone. Confirm the exact package suffix, all 16 SSOP pin functions, temperature grade, reference limits, acquisition timing, and lifecycle status. The ADS8345 family is not a drop-in option because it uses a 20-lead SSOP package; its different pin count and pinout require PCB changes and a new signal-routing review.

The synchronous serial interface should be driven with clean, controlled clock edges, and unused digital inputs should be held in defined states. If the serial path crosses an isolation boundary, account for propagation delay, skew, and common-mode limitations in the isolator. For differential analog inputs, balance the two signal paths and preserve symmetry to avoid degrading the available 86 dB SINAD performance.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer and distributor records identify an industrial-temperature ADC but do not provide explicit RoHS, REACH, halogen-free, lead-free, or conflict-minerals status for this ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADS8343EB datasheet ADS8343EB pinout ADS8343EB datasheet pdf ADS8343EB specifications ADS8343EB SSOP-16 footprint Texas Instruments ADS8343EB ADS8343EB 16-bit ADC ADS8343EB 100 kHz conversion rate ADS8343EB equivalent ADS8343EB replacement ADS8343EB vs ADS8341 ADS8343EB vs ADS7841 ADS8343EB application circuit ADS8343EB price ADS8343EB stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments ADS8343EB ADS8343 ADS8343EB/2K5 ADS8343E ADS8341 ADS7841 ADS8345 ADC analog-to-digital converter sampling ADC successive-approximation-register ADC SAR multiplexer synchronous serial interface SSOP-16 SSOP package surface mount differential input single-ended input reference voltage VREF SINAD signal-to-noise-plus-distortion ratio shutdown mode portable data logger
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন