ADS8343EB - 16-Bit 4-Channel ADC | Texas Instruments
Артикул: ADS8343EB ✓ АктивенADS8343EB Обзор
A sampling ADC is a category of analog-to-digital converter that samples an analog input and converts each sample into a digital code. The ADS8343 belongs to the sampling ADC hierarchy within data-converter ICs, where its onboard multiplexer selects among analog channels before conversion. Its four-channel architecture reduces the need for external analog switches in portable instruments, battery-powered recorders, and remote measurement equipment.
The principal features include 16-bit resolution, four selectable analog inputs, differential or single-ended operation, a 100 kHz conversion rate, and 86 dB signal-to-noise-plus-distortion ratio. The reference voltage can range from 500 mV to half the supply voltage, while the corresponding bipolar input range is ±VREF. A shutdown mode further reduces consumption when acquisition is paused.
Internally, the device uses a successive-approximation-register conversion architecture combined with an onboard multiplexer. Its synchronous serial interface supports communication with a compact embedded controller while enabling isolation between the analog front end and the digital control side. Typical power dissipation is 8 mW at a 100 kHz throughput rate with a 5 V supply, making the converter suitable for portable and battery-operated systems.
Typical applications include portable multichannel data loggers, personal digital assistant equipment, precision measurement instruments, industrial panel meters, battery-powered environmental monitors, and remote data-acquisition nodes. The 100 kHz throughput supports continuous monitoring of several relatively slow-changing analog signals without requiring a fast external multiplexer.
Designers should pay close attention to reference-voltage stability, input-range selection, source impedance, and the relationship between sample rate, signal bandwidth, and filter requirements. Place the reference and decoupling capacitors close to the associated pins, and route analog inputs away from high-current digital switching paths. The SSOP-16 footprint also requires careful assembly planning because its lead pitch is narrow.
This product page combines the manufacturer’s electrical specifications with practical channel-selection, reference, layout, and replacement guidance. It also distinguishes true pin-compatible alternatives from converter families that require a different package or pin count, helping engineers evaluate migration paths without changing the PCB footprint.
Аналоги без доработки для ADS8343EB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADS8343EB (тот же форм-фактор и посадочное место) — отличается по Package, Typical Power Dissipation, Resolution, Conversion Rate, Number of Input Channels.
ADS8343EB/2K5
✅ Прямая заменаУточнить цену
Открыть даташит →ADS8341E
✅ Прямая заменаУточнить цену
Открыть даташит →ADS7841E/2K5G4
✅ Прямая заменаУточнить цену
Открыть даташит →ADS8343E
✅ Прямая заменаУточнить цену
Открыть даташит →ADS8343EB Максимальные параметры и электрические характеристики
| Converter Type | Sampling successive-approximation-register ADC |
| Разрешение | 16 bit |
| Number of Input Channels | 4 single-ended or 2 differential |
| Conversion Rate | 100 kHz |
| Signal-to-Noise Plus Distortion Ratio | 86 dB |
| Input Architecture | Onboard 4-channel multiplexer |
| Input Range | ±VREF |
| Reference Voltage Range | 500 mV to VCC/2 |
| Supply Configuration | Single supply |
| Typical Power Dissipation | 8 mW at 100 kHz throughput with 5 V supply |
| Serial Interface | Synchronous serial interface |
| Shutdown Mode | Supported |
| Диапазон рабочих температур | -40 °C to +85 °C |
| Корпус | SSOP-16 |
| Тип монтажа | Surface mount |
Конфигурация выводов ADS8343EB
| Контакт 1 | REF+ — Positive external reference input |
| Контакт 2 | REF- — Negative external reference input |
| Контакт 3 | AIN0 — Analog input channel 0 |
| Контакт 4 | AIN1 — Analog input channel 1 |
| Контакт 5 | AIN2 — Analog input channel 2 |
| Контакт 6 | AIN3 — Analog input channel 3 |
| Контакт 7 | COM — Analog common reference |
| Контакт 8 | V- — Negative supply or ground connection |
| Контакт 9 | DGND — Digital ground |
| Контакт 10 | CS — Active-low chip-select input |
| Контакт 11 | SCLK — Serial clock input |
| Контакт 12 | DOUT — Serial data output |
| Контакт 13 | DIN — Serial data input |
| Контакт 14 | SYNC — Synchronization input |
| Контакт 15 | V+ — Positive supply input |
| Контакт 16 | NC — Not connected |
Типичное применение
ADS8343EB подходит для 6 применениеs: Portable Multichannel Data Logger, Battery-Powered Environmental Monitor, Precision Measurement Instrument, Remote Data-Acquisition Node, Industrial Panel Meter, Handheld Instrument with Multi-Sensor Front End.
Portable Multichannel Data Logger
The ADS8343EB fits portable data loggers that monitor several slowly changing sensor outputs from a battery-powered enclosure. Its four-channel multiplexer reduces the number of external analog switches, while 16-bit resolution preserves fine amplitude detail. At the documented 100 kHz maximum throughput, the converter can acquire multiple channels sequentially without requiring a separate multiplexer IC. The 8 mW typical power dissipation at 100 kHz with a 5 V supply also limits thermal and battery load, although shutdown mode should be enabled during idle periods to reduce consumption further.
Рекомендуется
Battery-Powered Environmental Monitor
The ADS8343EB is appropriate for environmental monitoring systems combining temperature, humidity, pressure, and other analog sensors. Its four single-ended inputs allow several sensor signals to share one converter, while two-channel differential operation is useful when the sensor produces a centered differential output around the reference voltage. The 16-bit resolution and 86 dB SINAD specification support measurements where sensor output changes are small relative to the full-scale input range. Shutdown mode can be used between measurement bursts to lower average system power.
Рекомендуется
Precision Measurement Instrument
The ADS8343EB supports laboratory and industrial measurement instruments that acquire several analog channels through a synchronous serial data path. Sixteen-bit resolution and 86 dB SINAD provide a strong starting point for precision measurement, while the 100 kHz conversion rate covers many sensor, transducer, and process-control signals. Differential input operation can improve rejection of common-mode noise when paired with suitable input circuitry. Reference stability and source impedance remain critical because both directly influence conversion accuracy and the usable input bandwidth.
Рекомендуется
Remote Data-Acquisition Node
The ADS8343EB is suitable for a remote acquisition node that gathers local analog measurements before transferring them through an isolated or embedded serial communications link. Its synchronous serial interface simplifies connection to a controller, and the serial format can support low-cost isolation between the measurement section and the communications electronics. Four single-ended or two differential input choices make it useful for compact multi-sensor nodes. Designers should keep analog routing away from isolation barriers and switching circuitry to preserve the converter’s 86 dB SINAD capability.
Рекомендуется
Industrial Panel Meter
The ADS8343EB can serve as the acquisition element in a multi-range industrial panel meter or process monitor. The onboard four-channel multiplexer accepts several sensor or divider signals without an external analog switch, reducing board area and leakage-related concerns. The 16-bit code width is useful when displaying slowly varying process values with sufficient resolution, and the 100 kHz conversion rate is more than adequate for common panel-meter update rates. A stable reference, input protection network, and properly designed low-pass filter are essential for reliable field operation.
Рекомендуется
Handheld Instrument with Multi-Sensor Front End
The ADS8343EB fits handheld instruments that combine analog sensor acquisition with embedded control and a serial display or communications interface. Its four-channel analog multiplexer and SSOP-16 package conserve board area, while 16-bit resolution is valuable for pressure, position, biomedical, or calibration signals whose useful variation occupies only a small part of the input range. The converter’s 8 mW typical operating power supports portable operation, but shutdown sequencing, reference startup, and filtering should be coordinated with the rest of the low-power system.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADS8343EB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADS8343EB/2K5 | ADS8341 | ADS7841 | ADS8343E |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 |
| Converter Type | Sampling SAR ADC | Sampling SAR ADC | Sampling SAR ADC | Sampling SAR ADC | Sampling SAR ADC |
| Conversion Rate | 100 kHz | 100 kHz | 100 kHz | 100 kHz | 100 kHz |
Ключевые отличия
- Higher conversion resolution within the compatible family (против ADS7841)
- Documented multichannel and high-speed capability (против ADS8341)
- Integrated input multiplexing reduces front-end complexity (против ADS8343E)
Заметки по проектированию
The manufacturer reports 8 mW typical power dissipation at 100 kHz throughput with a 5 V supply. Enable shutdown mode when continuous conversion is unnecessary, and account for reference current in the total supply budget. Because VREF may range from 500 mV to VCC/2, verify that the selected reference supports the required input range while maintaining adequate headroom for the chosen supply voltage.
Place the reference-decoupling network and supply bypass capacitors close to REF+, REF−, V+, and ground pins. Route AIN0 through AIN3 away from SCLK, SYNC, and other fast digital nets, and provide a solid ground plane with short return paths. A low-pass input network can control aliasing and high-frequency noise, but its resistance must be low enough to meet the acquisition-time requirements of the selected conversion rate.
Do not substitute the ADS8343 based on resolution and sample rate alone. Confirm the exact package suffix, all 16 SSOP pin functions, temperature grade, reference limits, acquisition timing, and lifecycle status. The ADS8345 family is not a drop-in option because it uses a 20-lead SSOP package; its different pin count and pinout require PCB changes and a new signal-routing review.
The synchronous serial interface should be driven with clean, controlled clock edges, and unused digital inputs should be held in defined states. If the serial path crosses an isolation boundary, account for propagation delay, skew, and common-mode limitations in the isolator. For differential analog inputs, balance the two signal paths and preserve symmetry to avoid degrading the available 86 dB SINAD performance.
Информация о соответствии
The manufacturer and distributor records identify an industrial-temperature ADC but do not provide explicit RoHS, REACH, halogen-free, lead-free, or conflict-minerals status for this ordering code.