Texas Instruments

ADS8344EB - 16-Bit 8-Channel 100-kSPS ADC | Texas Instruments

MPN: ADS8344EB ✓ সক্রিয়
Single supply Vdss 20-pin SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADS8344EB সারাংশ

Texas Instruments ADS8344EB is a 16-bit, 8-channel, 100-kSPS successive-approximation analog-to-digital converter with single-ended inputs and a synchronous serial interface, offered in a 20-pin SSOP package. It supports eight single-ended channels or four differential inputs and operates from a single supply.

An ADC, or analog-to-digital converter, converts continuously varying analog voltages into numeric values for digital processing. The ADS8344 belongs to the sampling ADC hierarchy, using successive approximation to acquire one conversion per sample period. It is positioned as a precision data-acquisition converter for industrial measurement, instrumentation, and embedded control systems where 16-bit resolution and multiple input channels are useful.

Key characteristics include a maximum conversion throughput of 100 kSPS, 16-bit resolution, and eight single-ended inputs. The reference voltage can vary from 500 mV to VCC, allowing the input range to be scaled to the available supply. Typical power dissipation is 10 mW when operating from a 5 V supply at the full 100-kSPS throughput rate, and the specified operating-temperature range extends from -40 °C to +85 °C.

The device uses a synchronous serial interface for transferring conversion results to a microcontroller, DSP, or other digital controller. Its eight-channel multiplexing capability lets one converter serve several analog measurement points, reducing component count compared with using multiple single-channel converters. The architecture is intended for direct connection to embedded serial buses when clocking, chip select, and data framing can be managed by the host processor.

Typical applications include multichannel process monitoring, factory automation, industrial sensor interfaces, laboratory data acquisition, and embedded instrumentation. A practical design should account for analog settling time after channel selection, reference-source impedance, digital-interface timing, and PCB routing around sensitive analog inputs. The manufacturer's ADS8344 datasheet should be used for the complete pin-description table, electrical limits, timing diagrams, and recommended application circuit.

When comparing this converter with alternatives, confirm package geometry, pin functions, input architecture, reference limits, supply range, conversion rate, and serial-interface timing before replacing it. ADS8344EB is best suited to compact 16-bit multichannel acquisition designs that require an SSOP-20 footprint and single-ended input flexibility.

এর জন্য ড্রপ-ইন বিকল্প ADS8344EB — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADS8344EB (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Typical Power Dissipation.

Texas Instruments
Package: 20-SSOP
Typical Power Dissipation: 10 mW at 100 kSPS and +5 V supply
এর সাথে তুলনা করুন ADS8344EB →

ADS8344E

✅ ড্রপ-ইন
Texas Instruments
📦 SSOP-20
16 bit · 100 kSPS · Successive-approximation register (SAR) · 8 channels · 8 channels · 4 channels · Single-ended inputs · 84 dB

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADS8344EB সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Successive-approximation ADC (SAR)
রেজোলিউশন 16 bit
Number of Channels 8 channels
Maximum Sampling Rate 100 kSPS
Input Configuration 8 single-ended or 4 differential inputs
Input Signal Type Single-ended
Supply Configuration Single supply
Typical Power Dissipation 10 mW at 5 V supply and 100 kSPS throughput
Reference Voltage Range 500 mV to VCC
Signal-to-Noise plus Distortion 84 dB
Digital Interface Synchronous serial interface
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
প্যাকেজ 20-pin SSOP
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস RoHS compliant
লাইফসাইকেল স্ট্যাটাস Active

ADS8344EB 20-pin ssop পিন কনফিগারেশন গাইড

ADS8344EB (20-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

ADS8344EB-এর জন্য 20-pin ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADS8344EB.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADS8344EB এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multichannel Industrial Process Monitoring, Precision Sensor Signal Acquisition, Laboratory Data-Acquisition System, Embedded Instrumentation Control, Factory Automation Control Module, Battery-Powered Remote Sensor Node.

🏭

Multichannel Industrial Process Monitoring

The ADS8344EB fits a multichannel process-monitoring system where several pressure, level, or temperature transducer signals must be digitized close to the sensing equipment. Its eight single-ended channels and 16-bit resolution provide a practical combination of measurement granularity and converter consolidation, while the 100-kSPS rate supports fast-changing process variables. The converter operates from a single supply and has typical power dissipation of 10 mW at a 5 V supply with 100-kSPS throughput, helping limit thermal loading in compact acquisition assemblies. In this design, the host processor controls channel selection, conversion timing, and synchronous serial data transfer. Engineers should allow the analog front end to settle after switching channels and should protect external sensor wiring against industrial transients before the signal reaches the ADC input.

📡

Precision Sensor Signal Acquisition

The ADS8344EB is suitable for conditioning and digitizing outputs from precision sensors such as strain, pressure, potentiometric, and low-level industrial transducers. Its 16-bit resolution provides substantially finer code spacing than an 8-bit converter, while eight single-ended channels reduce the number of converters needed in a multi-sensor assembly. The adjustable reference range of 500 mV to VCC allows the measurement span to be matched more closely to the sensor and amplifier output, improving utilization of the converter's codes. For low-level signals, a low-noise reference and carefully grounded analog section remain important. The serial interface is practical for a microcontroller-based data logger, although the sampling controller must honor conversion timing and the manufacturer-specified input settling behavior.

🖥️

Laboratory Data-Acquisition System

The ADS8344EB can serve as the central converter in a compact laboratory data-acquisition system that must capture several analog channels with 16-bit resolution. Eight multiplexed inputs reduce board area, and the 100-kSPS throughput is appropriate for many general-purpose bench measurements rather than high-speed waveform capture. A host microcontroller or DSP can receive conversion data through the synchronous serial interface, reducing parallel-bus routing and allowing synchronized acquisition of multiple channels. The analog section should include an appropriately buffered reference and protection suitable for the external signal range. Because the device offers 500 mV to VCC reference flexibility, the chosen reference also determines the input span and therefore the precision with which small laboratory signals are represented.

🔧

Embedded Instrumentation Control

The ADS8344EB fits embedded instrumentation where analog measurements feed control loops, status displays, or event records. Its single-supply operation and typical 10 mW dissipation at 5 V and 100-kSPS throughput simplify thermal planning in portable and cabinet-mounted equipment. The eight-channel multiplexing architecture is valuable when one instrument monitors several sensors, while 16-bit resolution supports fine measurement granularity. The synchronous serial interface allows a microcontroller or digital signal controller to manage conversions with deterministic timing and reduced wiring. A robust implementation should use the manufacturer timing diagrams to establish clock, chip-select, and data-valid relationships, and should separate analog return currents from digital clock and serial-data currents to avoid measurement errors.

🤖

Factory Automation Control Module

The ADS8344EB is appropriate for a factory automation module that must acquire several analog machine signals while communicating them to a controller. Sixteen-bit resolution is useful for actuator feedback, valve-position sensing, and analog process monitoring, and the 100-kSPS rate supports responsive sampling across eight inputs. Single-supply operation helps simplify the module's power architecture, while the synchronous serial interface minimizes connector count compared with a parallel ADC output. Industrial implementation details include surge protection, input filtering, fault isolation from switching regulators, and careful grounding between the analog and digital sections. The converter should be placed away from high-current switching nodes, and its reference should be decoupled according to the manufacturer application guidance to avoid conversion errors correlated with system activity.

🔋

Battery-Powered Remote Sensor Node

The ADS8344EB can be used in a battery-powered remote sensor node when eight analog measurements must be collected from a compact, low-power assembly. Its typical 10 mW dissipation at a 5 V supply and 100-kSPS throughput gives a defined operating point for battery-budget calculations, although actual consumption depends on supply voltage, conversion activity, and external circuitry. The 16-bit result width can reduce the need for averaging when signals are well conditioned, helping preserve measurement quality without excessive software filtering. The host microcontroller can power-gate surrounding analog circuitry and use the converter during scheduled acquisition windows. To extend battery life, use the lowest practical reference and supply voltages that still meet input range and accuracy requirements, and include local reference and supply decoupling near the device.

What are the key specifications of ADS8344EB that engineers should know?
The ADS8344EB is a 16-bit, 8-channel SAR ADC that supports single-ended sampling at up to 100 kSPS in a 20-pin SSOP package. According to the Texas Instruments ADS8344 product page, it offers eight single-ended or four differential inputs, a synchronous serial interface, and operation from a single supply. Typical power dissipation is 10 mW with a 5 V supply at 100-kSPS throughput, while the specified temperature range is -40 °C to +85 °C. These parameters make it appropriate for compact, multichannel precision measurement systems.
What is the operating voltage of ADS8344EB?
The ADS8344EB operates from a single supply, and its reference voltage can be programmed from 500 mV to VCC. According to the Texas Instruments ADS8344 product information, the input range follows the selected reference, allowing the converter to be scaled to the system supply. The exact absolute maximum and recommended supply limits for the physical implementation must be confirmed in the manufacturer datasheet before applying the converter to a new board.
How many channels and bits does ADS8344EB have?
The ADS8344EB provides eight input channels with 16-bit conversion resolution. Texas Instruments describes the device as an 8-channel, 16-bit sampling ADC with single-ended inputs, and the ADS8344 family can also be configured for four differential inputs. The multiplexed architecture is useful when several analog quantities must be measured by one converter, although channel-switching and acquisition timing must be respected during each conversion sequence.
What is the conversion rate of ADS8344EB?
The ADS8344EB supports a maximum sampling rate of 100 kSPS. According to the Texas Instruments product page, it is a 16-bit, 100-kSPS, 8-channel SAR ADC, and the family is optimized for 100-kHz throughput operation. This rate is suitable for many process-control, sensor-interface, and industrial measurement tasks, but the host controller must provide the required serial clock, chip-select, and conversion-control timing.
Where can I download the ADS8344EB datasheet PDF?
The official ADS8344 datasheet and product information are available from the Texas Instruments ADS8344 product page at https://www.ti.com/product/ADS8344. Use the manufacturer page for the current datasheet revision, package drawings, ordering information, and application guidance. The ADS8344EB is the 20-pin SSOP ordering option, so confirm that the selected package and temperature information correspond to the EB suffix before releasing a PCB design.
Where can I find the ADS8344EB pinout?
The ADS8344EB pinout is documented in the pin-configuration section of the Texas Instruments ADS8344 datasheet. The EB ordering option uses a 20-pin SSOP package, and the datasheet identifies each supply, analog-input, reference, digital-interface, and ground connection. Use the exact pin-description table rather than inferring pin functions from another SSOP ADC, because package outline compatibility does not guarantee identical signal assignments.
Is ADS8344EB suitable for an 8-channel industrial sensor interface?
The ADS8344EB is suitable for an eight-channel industrial sensor interface when the signals fit its 16-bit, single-ended SAR architecture and 100-kSPS sampling capability. Its multiplexed channels reduce converter count, while the synchronous serial interface supports connection to a microcontroller or DSP. The design must provide a suitable reference, observe acquisition settling requirements, protect sensitive analog inputs from industrial transients, and isolate ground-current paths from digital switching noise.
ADS8344EB vs ADS8344E - which is the better choice?
ADS8344EB is the preferable selection when a 20-pin SSOP implementation is required, while ADS8344E is the alternate-ordering option identified in the comparison data. The ADS8344EB distributor listing explicitly identifies the 20-pin SSOP configuration. Before substitution, compare the ordering tables for package type, temperature range, pin configuration, electrical limits, and availability. A manufacturer suffix can change the package or qualification attributes even when the underlying converter family is similar.
When should I choose ADS8344EB over ADS7844N?
Choose ADS8344EB when the design specifically requires the ADS8344 family's 16-bit resolution, eight-channel multiplexing, and 100-kSPS conversion performance in an SSOP-20 configuration. ADS7844N is described as a 20-lead QSOP part and is not established by the available documentation as having the same package geometry or ADS8344 electrical characteristics. It therefore should not be treated as a drop-in replacement without a complete pin and specification review.
Is ADS8344EB the same as ADS8344E?
ADS8344EB and ADS8344E belong to the ADS8344 family, but their ordering suffixes must be checked before treating them as interchangeable. The ADS8344EB listing identifies a 20-pin SSOP package, while ADS8344E appears in a direct family comparison. Confirm the package, pin arrangement, temperature range, and electrical limits in the current manufacturer ordering information. They are closely related family members, but the suffix determines the exact orderable device configuration.
What is the best drop-in replacement for ADS8344EB?
The best verified drop-in replacement is the family-ordering option ADS8344E, subject to confirmation that its package, pinout, temperature rating, and electrical limits match ADS8344EB. No additional cross-brand drop-in devices were established by the available cross-reference results. The ADS7844N and ADS8345NB/1KG4 comparisons identify related parts, but the available information does not prove identical SSOP-20 pin compatibility, so board replacement should not be assumed.
What can replace ADS8344EB without redesigning the PCB?
ADS8344E is the leading candidate for a no-redesign substitution because it is identified within the same ADS8344 family and is the closest available ordering comparison. A true drop-in decision also requires the same SSOP-20 footprint, identical pin functions, matching supply and reference limits, and compatible timing. The available cross-reference results do not establish five qualified drop-in alternatives, so ADS8344E should be validated against the current Texas Instruments ordering information before substitution.
Where can I buy ADS8344EB online?
Use the Request a Quote form on this page to request ADS8344EB pricing, stock confirmation, and lead time. The listing records identify an active Texas Instruments device in a 20-pin SSOP package, but purchasing conditions and quantities change independently of the technical specifications. XAIPART can confirm the exact suffix, standard packing quantity, and current commercial availability through the quote form.
What is the price of ADS8344EB?
The current ADS8344EB price depends on quantity, order breaks, packing, and market conditions, so use the Request a Quote form on this page for an actionable quotation. The device is listed as an active 16-bit, eight-channel, 100-kSPS ADC in a 20-pin SSOP package. A quote request should identify the required quantity and whether tape-and-reel, tray, cut-tape, or bulk packaging is needed for the assembly process.
What is the lead time and stock status for ADS8344EB?
Request the current ADS8344EB stock position, manufacturer lead time, and minimum order quantity through the Request a Quote form on this page. The manufacturer product information lists the family as active, and distributor listings identify ADS8344EB as an available orderable configuration. Actual availability can change by quantity and package format, so the quote response should be used for the purchasing decision.
How much power does ADS8344EB dissipate?
The ADS8344EB has a typical power dissipation of 10 mW when operating from a 5 V supply at 100-kSPS throughput. According to the Texas Instruments ADS8344 product information, this value represents the typical operating condition for the converter rather than a maximum across every possible input, reference, and digital-interface state. Thermal design should include ambient temperature, nearby heat sources, and the actual system supply voltage.
What are the environmental and compliance characteristics of ADS8344EB?
ADS8344EB is identified as RoHS compliant and is specified for operation from -40 °C to +85 °C. REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the available product information and should be confirmed before final environmental qualification. For regulated production, request the current manufacturer declarations and material-compliance documentation applicable to the selected ordering configuration.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS8344EB — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ADS8344EB for a compact 16-bit, eight-channel acquisition design that uses the SSOP-20 footprint, single-supply operation, and a synchronous serial interface. Its 100-kSPS throughput is appropriate for general industrial, sensor, and instrumentation measurements rather than high-speed waveform acquisition. ADS8344E is the closest same-family ordering alternative when its package and ordering configuration are confirmed as equivalent. Do not substitute ADS7844N on package size alone: the available information identifies a 12-bit converter in QSOP, so it requires different electrical and possibly mechanical qualification. ADS8345NB/1KG4 may suit a different design objective, but it is not established as an ADS8344EB drop-in replacement. For any production substitution, verify pin functions, acquisition timing, reference range, supply limits, temperature grade, lifecycle status, and package drawings against the manufacturer documentation before PCB release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADS8344E
Brand Texas Instruments Texas Instruments
Package SSOP-20 SSOP-20
Resolution 16 bit 16 bit
Number of Channels 8 channels 8 channels
Maximum Sampling Rate 100 kSPS 100 kSPS
Input Configuration 8 single-ended or 4 differential inputs 8 single-ended or 4 differential inputs
Reference Voltage Range 500 mV to VCC 500 mV to VCC
Typical Power Dissipation 10 mW at 5 V supply and 100 kSPS throughput 10 mW at 5 V supply and 100 kSPS throughput
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Digital Interface Synchronous serial interface Synchronous serial interface
Signal-to-Noise plus Distortion 84 dB 84 dB
RoHS Status RoHS compliant RoHS compliant

মূল পার্থক্যসমূহ

  • Eight-channel integration in a compact SSOP-20 converter (বনামADS7844N)
  • Higher conversion resolution than the ADS7844 family (বনামADS7844N)
  • Single-supply operation with a flexible reference range (বনামADS8345NB/1KG4)

ডিজাইন নোট

Place the reference and supply bypass capacitors close to their corresponding device pins, and keep the analog-input traces short and away from serial clock and digital-output traces. The SSOP-20 footprint requires fine-pitch routing, so use a manufacturer-approved land pattern and confirm the PCB soldermask and copper definitions during library validation. A solid ground plane should remain continuous beneath the converter where practical, while analog and digital return currents are kept from sharing high-current switching paths.

Treat the synchronous serial clock as a potentially fast edge even when conversion throughput is only 100 kSPS. Route clock and data as a controlled group, provide a continuous nearby ground reference, and avoid splitting the plane beneath the interface. Check setup and hold timing against the selected host clock and use the manufacturer timing diagrams as the source of truth. If the controller and ADC are separated by a cable or isolator, account for propagation delay and logic-level translation rather than assuming a direct point-to-point connection.

Do not treat a similarly packaged ADC as interchangeable solely from its outline or channel count. Confirm the pin names, analog-input range, reference limits, supply requirements, acquisition timing, and digital protocol for ADS8344EB before designing a replacement footprint. In multichannel measurements, allow the selected channel and its associated front end to settle before interpreting the conversion result. Keeping the reference stable and well decoupled is also essential because reference variation can appear directly as gain and offset error.

Use the stated 10 mW typical dissipation at 5 V and 100-kSPS as the initial thermal estimate, then recalculate with the actual supply, conversion rate, and adjacent heat sources. At 10 mW, the converter's contribution to local temperature rise is generally modest, but the SSOP-20 lead pitch limits heat-flow area and package placement matters in densely assembled boards. Avoid enclosing the device in a thermally stagnant pocket and follow the manufacturer's PCB-layout guidance for exposed thermal management where applicable.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is identified by the Mouser product listing. The available product information does not establish REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADS8344EB ADS8344EB datasheet ADS8344EB datasheet pdf ADS8344EB pinout ADS8344EB specifications ADS8344EB SSOP-20 ADS8344EB price ADS8344EB stock Texas Instruments ADS8344EB ADS8344EB replacement ADS8344EB vs ADS8344E ADS8344EB equivalent ADS8344EB cross reference ADS8344EB industrial sensor ADC ADS8344EB footprint

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments ADS8344EB ADS8344E ADS7844N ADS8345NB/1KG4 analog-to-digital converter ADC successive-approximation ADC SAR sampling ADC data-acquisition converter single-ended input differential input synchronous serial interface reference voltage conversion throughput 100 kSPS 16-bit resolution 84 dB SINAD SSOP-20 SSOP package family surface mount RoHS industrial sensor interface process monitoring
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন