Analog Devices

ADV3221ARZ-R7 - 800 MHz 4:1 Analog Multiplexer | Analog Devices

MPN: ADV3221ARZ-R7 ✓ সক্রিয়
±5 V Vdss 16-lead SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADV3221ARZ-R7 সারাংশ

The Analog Devices ADV3221ARZ-R7 is a high-speed, buffered 4:1 analog multiplexer in a 16-lead SOIC package. Its headline specifications are greater than 800 MHz of -3 dB signal bandwidth, less than 20 ns channel switching to 1% settling, and less than 58 dB crosstalk. The device operates from dual positive and negative supply rails of ±5 V and is intended for routing high-speed differential or single-ended signals through sampling, measurement, and test systems.

An analog multiplexer is a switching network that connects one of several analog inputs to a common output. The ADV3221 belongs to the analog switch and multiplexer family, where it sits between the functional hierarchy of interface ICs and signal-routing circuits. Unlike a mechanical relay or discrete MOSFET switch, an integrated multiplexer provides controlled, repeatable channel selection with buffered outputs and dedicated logic control.

Key features of the ADV3221 include a 4:1 configuration, 16-lead SOIC packaging, a 1.27 mm terminal pitch, double-buffered logic control, and gain of +1. According to the Analog Devices ADV3221 data sheet, Rev. 0, the device supports a -3 dB bandwidth greater than 800 MHz and reaches 1% settling in less than 20 ns. Crosstalk is specified below 58 dB, making the mux suitable for high-speed signal paths where channel-to-channel isolation affects measurement accuracy.

The buffered architecture reduces the impedance and loading variation that normally occurs when upstream sources are connected directly to a switching matrix. The +1 gain setting preserves signal amplitude through the selected path, while double-buffered control helps separate address and enable timing. These characteristics make the ADV3221 useful in automated test equipment, high-speed data acquisition, oscilloscope and logic-analyzer front ends, and telecommunications test systems.

Typical installations use the ADV3221 to select among four high-speed sources feeding a downstream converter, comparator, or instrumentation amplifier. Because channel transitions occur in less than 20 ns, the device can support demanding measurement sequences, although system-level settling still depends on source impedance, cable length, and the bandwidth of the following stage.

When laying out a high-speed design, place the device close to the multiplexed signal sources, use controlled-impedance routing for broadband signals, and keep the unused analog inputs terminated consistently. Validate crosstalk and settling in the assembled system because connector transitions, return paths, and power-supply noise can degrade the laboratory performance of the mux.

This page combines manufacturer specifications, package and pinout guidance, sourcing information, and application-level design guidance for engineers evaluating the ADV3221ARZ-R7 in high-speed analog routing systems.

এর জন্য ড্রপ-ইন বিকল্প ADV3221ARZ-R7 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADV3221ARZ-R7 (একই form factor এবং footprint) — পার্থক্য রয়েছে Channel Switching Time, Crosstalk, Supply Voltage.

Analog Devices
Channel Switching Time: Less than 20 ns to 1% settling
Crosstalk: Less than 58 dB
Supply Voltage: ±4.5 V to ±5.5 V
এর সাথে তুলনা করুন ADV3221ARZ-R7 →

ADV3221ARZ

✅ ড্রপ-ইন
Analog Devices
📦 16-lead SOIC
4:1 · 4 · 1 · Analog · Buffered 4:1 analog multiplexer · Double-buffered logic · 800 MHz at 200 mV p-p · 750 MHz

✓ স্টকে আছে

$7.5469 / ইউনিট

ডেটাশিট দেখুন →

ADV3221ARZ-R7 বিশেষণ

Configuration 4:1 analog multiplexer
Signal Bandwidth >800 MHz at -3 dB
Channel Switching Time <20 ns to 1% settling
Crosstalk <58 dB
Isolation 67 dB
সাপ্লাই ভোল্টেজ ±5 V
Signal Gain +1
Logic Control Double-buffered logic
Number of Channels 4
Number of Circuits 1
প্যাকেজ 16-lead SOIC
Terminal Pitch 1.27 mm
মাউন্টিং স্টাইল SMD/SMT
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
Product Lifecycle PRODUCTION

ADV3221ARZ-R7 16-lead soic পিন কনফিগারেশন গাইড

ADV3221ARZ-R7 (16-lead soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADV3221ARZ-R7-এর জন্য 16-lead soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADV3221ARZ-R7.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADV3221ARZ-R7 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automated High-Speed Test Systems, Oscilloscope and Instrumentation Front Ends, Telecommunications Signal Routing, High-Speed Data Acquisition, Oscilloscope Probe Multiplexing, Video and High-Speed Interface Monitoring.

🏭

Automated High-Speed Test Systems

The ADV3221ARZ-R7 fits automated test systems that must route four high-bandwidth sources into one measurement path. Its greater-than-800 MHz -3 dB bandwidth avoids making the mux the narrowest element in many baseband test chains, while less-than-20 ns switching supports rapid selection between test points. The +1 gain preserves amplitude through the selected route and reduces the need for another gain stage. Double-buffered logic helps separate address timing from enable control. Place the device close to the source connectors, provide consistent source terminations, and verify that fixture cables and the receiving instrument do not introduce a larger bandwidth limit than the mux itself.

📺

Oscilloscope and Instrumentation Front Ends

The ADV3221ARZ-R7 can select among four high-speed sources feeding the front end of an oscilloscope, logic analyzer, or automated measurement instrument. Bandwidth above 800 MHz makes it suitable for routing signals well beyond the bandwidth of many general-purpose analog switch ICs. Less-than-20 ns channel settling permits the acquisition system to begin sampling quickly after selection, while 67 dB isolation helps reduce leakage from unselected channels. The device's double-buffered control supports organized address and enable sequencing. Care should be taken to control impedance discontinuities, maintain short return paths, and terminate unused inputs consistently so connector reflections do not degrade measured rise time or channel-to-channel isolation.

🌐

Telecommunications Signal Routing

The ADV3221ARZ-R7 is useful in telecommunications test and monitoring equipment where four wideband channels must be presented to a common analysis block. Its greater-than-800 MHz -3 dB bandwidth supports high-speed baseband and burst measurements, and the less-than-58 dB crosstalk specification helps limit unwanted coupling between adjacent routed sources. The 4:1 arrangement reduces the number of separate downstream converters or analyzers required. Because real telecom fixtures often include cable launches and connector transitions, engineers should place the mux near the source side, use controlled-impedance routing, and confirm that connector and cable loss do not exceed the bandwidth budget of the complete measurement path.

🖥️

High-Speed Data Acquisition

The ADV3221ARZ-R7 supports high-speed data-acquisition boards that sample from several inputs in rapid succession. The greater-than-800 MHz bandwidth preserves fast edge information, and channel switching in less than 20 ns to 1% settling allows the acquisition engine to move between sources with limited dead time. The +1 signal gain avoids attenuating the selected source before conversion. Double-buffered logic simplifies control sequencing when address and enable functions must change in a defined order. Place the mux near the connector or sensor interface, keep analog routing compact, and verify settling against the complete receiver chain, since amplifier recovery and ADC acquisition time can exceed the mux's own transition time.

📡

Oscilloscope Probe Multiplexing

The ADV3221ARZ-R7 can consolidate four probe connections into a single high-speed acquisition channel where channel switching is acceptable. Its greater-than-800 MHz -3 dB bandwidth and less-than-20 ns switching are advantageous for probing high-edge-rate signals, and the +1 gain avoids adding attenuation ahead of the instrument input. Less-than-58 dB crosstalk helps limit coupling from adjacent channels during multiplexed measurements. In practice, probe capacitance, cable length, and the instrument's input capacitance can dominate the bandwidth, so the mux should be positioned near the instrument side of the fixture and its switching transients should be correlated with the sampling trigger to avoid capturing unresolved transitions.

🎥

Video and High-Speed Interface Monitoring

The ADV3221ARZ-R7 can monitor or compare four high-speed interfaces in a diagnostic system where the selected signal must pass with minimal bandwidth loss. Its greater-than-800 MHz -3 dB bandwidth supports signal integrity work involving fast edges and low-frequency content simultaneously, while channel switching in less than 20 ns allows measurements to follow active transitions. The +1 gain keeps the selected path transparent, and the 4:1 ratio limits the number of receivers needed. Engineers should maintain controlled impedance, provide a continuous ground reference beneath the routed signals, and avoid long stubs on unselected channels, because those stubs can radiate and degrade the isolation measured during adjacent-channel operation.

What is the ADV3221ARZ-R7?
The ADV3221ARZ-R7 is an Analog Devices high-speed, buffered 4:1 analog multiplexer in a 16-lead SOIC package. According to the Analog Devices ADV3221 data sheet, Rev. 0, it provides greater than 800 MHz of -3 dB signal bandwidth, less than 20 ns channel switching to 1% settling, and less than 58 dB crosstalk. It is designed for routing high-speed signals in test, measurement, and data-acquisition equipment.
What is the bandwidth of the ADV3221ARZ-R7?
The ADV3221ARZ-R7 has a -3 dB signal bandwidth greater than 800 MHz. The Analog Devices ADV3221 product page and data sheet identify the ADV3221 as an 800 MHz-class 4:1 analog mux. This bandwidth allows it to route substantially faster signals than conventional low-frequency analog switch ICs, although cable loss, source impedance, and the bandwidth of the receiving circuit still determine performance at the system level.
How fast does the ADV3221ARZ-R7 switch channels?
The ADV3221ARZ-R7 switches between channels in less than 20 ns to 1% settling. This figure comes from the Analog Devices ADV3221 data sheet, Rev. 0. The specification describes the device's channel transition rather than the complete settling time of an external amplifier or acquisition chain, so downstream bandwidth and system layout remain important when designing a fast measurement sequence.
What supply voltage does the ADV3221ARZ-R7 require?
The ADV3221ARZ-R7 operates from ±5 V supply rails. Partstack's component listing identifies the device as a 4-channel differential multiplexer with positive and negative 5 V power supplies, consistent with the Analog Devices ADV3221 family description. Dual supplies support bipolar signal routing and reduce the need for separate input and output clamping networks when signals extend beyond ground.
What is the difference between ADV3221ARZ and ADV3221ARZ-R7?
ADV3221ARZ and ADV3221ARZ-R7 are the same 4:1, 16-lead SOIC analog multiplexer with the same core electrical function; the ordering suffix distinguishes the packaging format offered. The DigiKey product records identify both as a one-circuit 4:1 mux in a 16-SOIC package, and Xecor lists the same SOIC case and SMD/SMT mounting. Because the distinction is packaging-related rather than an electrical improvement, it is not counted as an engineering alternative on this page.
When should I choose the ADV3221ARZ-R7 instead of a lower-speed analog mux?
Choose the ADV3221ARZ-R7 when the selected source must carry signals with meaningful content well above conventional video or instrumentation bandwidth. Its greater-than-800 MHz -3 dB bandwidth and less-than-20 ns switching allow rapid selection among four channels, while +1 gain preserves signal amplitude. A lower-speed mux is preferable only when operating frequency is modest, power or cost dominates, and these high-speed characteristics would remain unused.
Is the ADV3221ARZ-R7 suitable for high-speed test and measurement systems?
Yes, the ADV3221ARZ-R7 is well suited to high-speed test and measurement routing. The 4:1 configuration connects multiple high-bandwidth sources to a shared measurement path, and the greater-than-800 MHz bandwidth avoids acting as the limiting stage for many baseband signals. Double-buffered logic also helps separate control timing from analog selection, supporting repeatable automated acquisition sequences when combined with properly terminated sources.
Can the ADV3221ARZ-R7 replace another 800 MHz 4:1 multiplexer?
The ADV3221ARZ-R7 can replace another 4:1 multiplexer only after verifying pin-by-pin compatibility. A valid drop-in replacement must match the 16-lead SOIC footprint, power rails, logic levels, control polarity, input impedance, bandwidth, and settling behavior of the original circuit. No independently verified cross-manufacturer drop-in replacement is identified here, so engineers should compare the full pin description table in the Analog Devices data sheet before approving a substitution.
What are the key specifications of ADV3221ARZ-R7 that engineers should know?
The key ADV3221ARZ-R7 specifications are its 4:1 configuration, greater-than-800 MHz -3 dB bandwidth, less-than-20 ns switching to 1% settling, less-than-58 dB crosstalk, 67 dB isolation, ±5 V supply operation, and 16-lead SOIC package. According to the Analog Devices ADV3221 data sheet, Rev. 0, it also provides double-buffered logic control, +1 signal gain, a 1.27 mm terminal pitch, and operation from -40 °C to +85 °C.
Where can I download the ADV3221ARZ-R7 datasheet PDF?
The official ADV3221 datasheet is available from the Analog Devices product page at https://www.analog.com/en/products/adv3221.html, where the Data Sheet, Rev. 0 is listed under the product's documentation resources. The alldatasheet mirror at https://www.alldatasheet.com/datasheet-pdf/pdf/337733/AD/ADV3221ARZ-R7.html is another secondary entry point, but the manufacturer page should be preferred for the authoritative document and revisions.
Where can I find the ADV3221ARZ-R7 pinout?
The ADV3221ARZ-R7 pinout is documented in the pin-configuration table of the Analog Devices ADV3221 data sheet, Rev. 0, which is linked from the official product page. The package is a 16-lead SOIC with a 1.27 mm terminal pitch. Because individual pin names and functions are not printed in the available listing excerpts, use the manufacturer pin-description table when assigning PCB nets instead of inferring connections from package position alone.
What can replace the ADV3221ARZ-R7?
A replacement for the ADV3221ARZ-R7 must be a pin-compatible 4:1 analog mux in the same 16-lead SOIC footprint with comparable bandwidth, settling time, supply rails, and logic levels. The verified cross-reference results identify ADV3221ARZ as the same core device in a different ordering format, but it adds no electrical differentiation and is therefore not presented as an engineering alternative. Confirm any candidate against the ADV3221 data sheet before treating it as a drop-in part.
Where can I buy ADV3221ARZ-R7 online?
The ADV3221ARZ-R7 can be sourced through the Request a Quote form on this page, which routes the request to the XAIPART sales team for current availability, lot traceability, and order handling. The manufacturer lists the part as PRODUCTION, and the -R7 ordering code designates the supplied package configuration. Submit the quantity and target date so the team can confirm the appropriate source and delivery schedule.
What is the price of the ADV3221ARZ-R7?
Current pricing for the ADV3221ARZ-R7 is provided through the Request a Quote form on this page because component pricing can change with volume, date, and sourcing conditions. The available listings include a starting figure for the ADV3221 family, but they do not print an explicit quantity-break table for this exact -R7 ordering code. Use the quote form for a price tied to the required quantity, packing format, and delivery schedule.
What is the lead time for ADV3221ARZ-R7?
The current lead time for the ADV3221ARZ-R7 should be confirmed through the Request a Quote form on this page. The Analog Devices product page identifies the ADV3221 as PRODUCTION, but a manufacturing status alone does not establish available wafer or finished-goods inventory for a specific date and quantity. Provide your required quantity and target delivery date when requesting the quote.
Is the ADV3221ARZ-R7 in stock?
Stock status for the ADV3221ARZ-R7 changes with demand and replenishment, so it should be confirmed through the Request a Quote form on this page. The manufacturer lists the ADV3221 as PRODUCTION, and multiple distributor records exist for the -R7 order code, but those records are not a live inventory guarantee. Submit the required quantity and packaging preference to obtain current availability confirmation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADV3221ARZ-R7 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Select the ADV3221ARZ-R7 when a design requires four high-speed analog inputs to be routed through one channel with greater-than-800 MHz bandwidth, less-than-20 ns switching, and +1 gain. It is especially appropriate for automated test systems, instrumentation, and multi-source acquisition where channel transitions must be fast and unselected-channel coupling must remain controlled. Do not choose it for low-frequency switching, extremely low-power portable systems, or applications where its high-speed characteristics and ±5 V dual supply provide no benefit. No cross-manufacturer drop-in replacement could be verified from the available cross-reference results. ADV3221ARZ is electrically the same core device in a different ordering format, but it is not offered as an engineering alternative because it does not add distinct electrical value. Final sourcing and substitution decisions should be confirmed against the current Analog Devices data sheet and the exact PCB footprint.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Configuration 4:1 analog multiplexer
Signal Bandwidth >800 MHz at -3 dB
Channel Switching Time <20 ns to 1% settling
Crosstalk <58 dB
Isolation 67 dB
Supply Voltage ±5 V
Signal Gain +1
Logic Control Double-buffered logic
Package 16-lead SOIC, 1.27 mm pitch
Brand Analog Devices
Operating Temperature Range -40 °C to +85 °C
Lifecycle Status PRODUCTION

মূল পার্থক্যসমূহ

  • Wide-bandwidth 4:1 routing in a standard 16-lead SOIC footprint (বনামADV3221ARZ)
  • Fast 1% channel settling for high-speed acquisition (বনামADV3221ARZ)
  • Buffered, double-buffered control for organized high-speed sequencing (বনামADV3221ARZ)

ডিজাইন নোট

Place the ADV3221 close to the signal sources and preserve a continuous ground reference beneath every analog route. The device exceeds 800 MHz of -3 dB bandwidth, so connector launches, long traces, and impedance discontinuities can dominate the system response. Use a controlled-impedance layout where practical, keep unused inputs terminated in a manner consistent with the source impedance, and validate rise time and crosstalk on the assembled fixture rather than relying only on simulated mux performance.

Do not interpret the less-than-20 ns switching specification as the complete acquisition settling time of the system. The mux reaches 1% settling quickly, but the following amplifier, converter, cable, and connector may require additional time. Synchronize the ADC trigger with the channel-selection controls, allow the receiver chain to recover, and verify timing with the actual fixture because input capacitance and source impedance can materially change observed settling behavior.

Apply the power and decoupling recommendations in the Analog Devices ADV3221 data sheet, Rev. 0, and keep supply routing compact so the device's high-speed switching current does not share return paths with sensitive analog inputs. Provide a low-impedance ground plane, avoid routing analog signals beneath noisy supply or control traces, and separate address lines from sensitive nodes where practical. These measures limit supply disturbance and coupling that could otherwise degrade the specified less-than-58 dB crosstalk performance.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available distributor listings identify the part as RoHS-compliant, but no explicit compliance declaration or standard designation is printed in the manufacturer excerpts. Compliance fields are therefore recorded as unknown, and automotive qualification is treated as not applicable based on the absence of an AEC-Q100-rated ordering variant in the available data.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADV3221ARZ-R7 ADV3221ARZ-R7 datasheet ADV3221ARZ-R7 datasheet pdf ADV3221ARZ-R7 pinout ADV3221ARZ-R7 specifications ADV3221 800 MHz 4:1 mux ADV3221ARZ-R7 equivalent ADV3221ARZ-R7 replacement ADV3221ARZ-R7 vs ADV3221ARZ Analog Devices ADV3221ARZ-R7 ADV3221 16 SOIC pinout ADV3221ARZ-R7 high speed test application ADV3221ARZ-R7 price ADV3221ARZ-R7 stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADV3221 ADV3221ARZ-R7 ADV3221ARZ analog multiplexer 4:1 multiplexer analog switch IC interface IC semiconductor 800 MHz bandwidth less than 20 ns switching 1% settling less than 58 dB crosstalk 67 dB isolation double-buffered logic gain of +1 SOIC-16 surface mount 1.27 mm terminal pitch ±5 V supply high-speed test and measurement data acquisition signal integrity RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন