ADV3221ARZ-R7 - 800 MHz 4:1 Analog Multiplexer | Analog Devices
料号: ADV3221ARZ-R7 ✓ 量产中ADV3221ARZ-R7 概述
An analog multiplexer is a switching network that connects one of several analog inputs to a common output. The ADV3221 belongs to the analog switch and multiplexer family, where it sits between the functional hierarchy of interface ICs and signal-routing circuits. Unlike a mechanical relay or discrete MOSFET switch, an integrated multiplexer provides controlled, repeatable channel selection with buffered outputs and dedicated logic control.
Key features of the ADV3221 include a 4:1 configuration, 16-lead SOIC packaging, a 1.27 mm terminal pitch, double-buffered logic control, and gain of +1. According to the Analog Devices ADV3221 data sheet, Rev. 0, the device supports a -3 dB bandwidth greater than 800 MHz and reaches 1% settling in less than 20 ns. Crosstalk is specified below 58 dB, making the mux suitable for high-speed signal paths where channel-to-channel isolation affects measurement accuracy.
The buffered architecture reduces the impedance and loading variation that normally occurs when upstream sources are connected directly to a switching matrix. The +1 gain setting preserves signal amplitude through the selected path, while double-buffered control helps separate address and enable timing. These characteristics make the ADV3221 useful in automated test equipment, high-speed data acquisition, oscilloscope and logic-analyzer front ends, and telecommunications test systems.
Typical installations use the ADV3221 to select among four high-speed sources feeding a downstream converter, comparator, or instrumentation amplifier. Because channel transitions occur in less than 20 ns, the device can support demanding measurement sequences, although system-level settling still depends on source impedance, cable length, and the bandwidth of the following stage.
When laying out a high-speed design, place the device close to the multiplexed signal sources, use controlled-impedance routing for broadband signals, and keep the unused analog inputs terminated consistently. Validate crosstalk and settling in the assembled system because connector transitions, return paths, and power-supply noise can degrade the laboratory performance of the mux.
This page combines manufacturer specifications, package and pinout guidance, sourcing information, and application-level design guidance for engineers evaluating the ADV3221ARZ-R7 in high-speed analog routing systems.
直接替换替代料: ADV3221ARZ-R7 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADV3221ARZ-R7 (相同外形与封装尺寸) ——差异在于 Channel Switching Time, Crosstalk, Supply Voltage.
ADV3221ARZ
✅ 直接替换✓ 有现货
$7.5469 / 个
查看数据手册 →ADV3221ARZ-R7 规格参数
| Configuration | 4:1 analog multiplexer |
| Signal Bandwidth | >800 MHz at -3 dB |
| Channel Switching Time | <20 ns to 1% settling |
| Crosstalk | <58 dB |
| Isolation | 67 dB |
| 电源电压 | ±5 V |
| Signal Gain | +1 |
| Logic Control | Double-buffered logic |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| 封装 | 16-lead SOIC |
| Terminal Pitch | 1.27 mm |
| 安装方式 | SMD/SMT |
| 工作温度范围 | -40 °C to +85 °C |
| Product Lifecycle | PRODUCTION |
ADV3221ARZ-R7 16-lead soic 引脚配置指南
ADV3221ARZ-R7(16-lead soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADV3221ARZ-R7.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV3221ARZ-R7 适用于 6 应用s: Automated High-Speed Test Systems, Oscilloscope and Instrumentation Front Ends, Telecommunications Signal Routing, High-Speed Data Acquisition, Oscilloscope Probe Multiplexing, Video and High-Speed Interface Monitoring.
Automated High-Speed Test Systems
The ADV3221ARZ-R7 fits automated test systems that must route four high-bandwidth sources into one measurement path. Its greater-than-800 MHz -3 dB bandwidth avoids making the mux the narrowest element in many baseband test chains, while less-than-20 ns switching supports rapid selection between test points. The +1 gain preserves amplitude through the selected route and reduces the need for another gain stage. Double-buffered logic helps separate address timing from enable control. Place the device close to the source connectors, provide consistent source terminations, and verify that fixture cables and the receiving instrument do not introduce a larger bandwidth limit than the mux itself.
推荐
Oscilloscope and Instrumentation Front Ends
The ADV3221ARZ-R7 can select among four high-speed sources feeding the front end of an oscilloscope, logic analyzer, or automated measurement instrument. Bandwidth above 800 MHz makes it suitable for routing signals well beyond the bandwidth of many general-purpose analog switch ICs. Less-than-20 ns channel settling permits the acquisition system to begin sampling quickly after selection, while 67 dB isolation helps reduce leakage from unselected channels. The device's double-buffered control supports organized address and enable sequencing. Care should be taken to control impedance discontinuities, maintain short return paths, and terminate unused inputs consistently so connector reflections do not degrade measured rise time or channel-to-channel isolation.
推荐
Telecommunications Signal Routing
The ADV3221ARZ-R7 is useful in telecommunications test and monitoring equipment where four wideband channels must be presented to a common analysis block. Its greater-than-800 MHz -3 dB bandwidth supports high-speed baseband and burst measurements, and the less-than-58 dB crosstalk specification helps limit unwanted coupling between adjacent routed sources. The 4:1 arrangement reduces the number of separate downstream converters or analyzers required. Because real telecom fixtures often include cable launches and connector transitions, engineers should place the mux near the source side, use controlled-impedance routing, and confirm that connector and cable loss do not exceed the bandwidth budget of the complete measurement path.
推荐
High-Speed Data Acquisition
The ADV3221ARZ-R7 supports high-speed data-acquisition boards that sample from several inputs in rapid succession. The greater-than-800 MHz bandwidth preserves fast edge information, and channel switching in less than 20 ns to 1% settling allows the acquisition engine to move between sources with limited dead time. The +1 signal gain avoids attenuating the selected source before conversion. Double-buffered logic simplifies control sequencing when address and enable functions must change in a defined order. Place the mux near the connector or sensor interface, keep analog routing compact, and verify settling against the complete receiver chain, since amplifier recovery and ADC acquisition time can exceed the mux's own transition time.
推荐
Oscilloscope Probe Multiplexing
The ADV3221ARZ-R7 can consolidate four probe connections into a single high-speed acquisition channel where channel switching is acceptable. Its greater-than-800 MHz -3 dB bandwidth and less-than-20 ns switching are advantageous for probing high-edge-rate signals, and the +1 gain avoids adding attenuation ahead of the instrument input. Less-than-58 dB crosstalk helps limit coupling from adjacent channels during multiplexed measurements. In practice, probe capacitance, cable length, and the instrument's input capacitance can dominate the bandwidth, so the mux should be positioned near the instrument side of the fixture and its switching transients should be correlated with the sampling trigger to avoid capturing unresolved transitions.
推荐
Video and High-Speed Interface Monitoring
The ADV3221ARZ-R7 can monitor or compare four high-speed interfaces in a diagnostic system where the selected signal must pass with minimal bandwidth loss. Its greater-than-800 MHz -3 dB bandwidth supports signal integrity work involving fast edges and low-frequency content simultaneously, while channel switching in less than 20 ns allows measurements to follow active transitions. The +1 gain keeps the selected path transparent, and the 4:1 ratio limits the number of receivers needed. Engineers should maintain controlled impedance, provide a continuous ground reference beneath the routed signals, and avoid long stubs on unselected channels, because those stubs can radiate and degrade the isolation measured during adjacent-channel operation.
推荐
推荐产品汇总
工程参考数据: ADV3221ARZ-R7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Configuration | 4:1 analog multiplexer |
| Signal Bandwidth | >800 MHz at -3 dB |
| Channel Switching Time | <20 ns to 1% settling |
| Crosstalk | <58 dB |
| Isolation | 67 dB |
| Supply Voltage | ±5 V |
| Signal Gain | +1 |
| Logic Control | Double-buffered logic |
| Package | 16-lead SOIC, 1.27 mm pitch |
| Brand | Analog Devices |
| Operating Temperature Range | -40 °C to +85 °C |
| Lifecycle Status | PRODUCTION |
关键差异点
- Wide-bandwidth 4:1 routing in a standard 16-lead SOIC footprint (对比 ADV3221ARZ)
- Fast 1% channel settling for high-speed acquisition (对比 ADV3221ARZ)
- Buffered, double-buffered control for organized high-speed sequencing (对比 ADV3221ARZ)
设计说明
Place the ADV3221 close to the signal sources and preserve a continuous ground reference beneath every analog route. The device exceeds 800 MHz of -3 dB bandwidth, so connector launches, long traces, and impedance discontinuities can dominate the system response. Use a controlled-impedance layout where practical, keep unused inputs terminated in a manner consistent with the source impedance, and validate rise time and crosstalk on the assembled fixture rather than relying only on simulated mux performance.
Do not interpret the less-than-20 ns switching specification as the complete acquisition settling time of the system. The mux reaches 1% settling quickly, but the following amplifier, converter, cable, and connector may require additional time. Synchronize the ADC trigger with the channel-selection controls, allow the receiver chain to recover, and verify timing with the actual fixture because input capacitance and source impedance can materially change observed settling behavior.
Apply the power and decoupling recommendations in the Analog Devices ADV3221 data sheet, Rev. 0, and keep supply routing compact so the device's high-speed switching current does not share return paths with sensitive analog inputs. Provide a low-impedance ground plane, avoid routing analog signals beneath noisy supply or control traces, and separate address lines from sensitive nodes where practical. These measures limit supply disturbance and coupling that could otherwise degrade the specified less-than-58 dB crosstalk performance.
合规信息
The available distributor listings identify the part as RoHS-compliant, but no explicit compliance declaration or standard designation is printed in the manufacturer excerpts. Compliance fields are therefore recorded as unknown, and automotive qualification is treated as not applicable based on the absence of an AEC-Q100-rated ordering variant in the available data.