AK4528VM 24-Bit 96kHz Stereo Audio Codec | AKM Semiconductor
MPN: AK4528VM ✗ জীবনকালের সমাপ্তিAK4528VM সারাংশ
An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog output. In the broader semiconductor hierarchy, the AK4528VM belongs to the audio-codec class of interface ICs, combining data converters, digital interfaces, analog circuitry, and clocking functions within one device.
The ADC uses AKM's Enhanced Dual Bit architecture and is described as providing a wide dynamic range. The DAC uses the Advanced Multi Bit architecture with switched-capacitor-filter techniques to achieve low out-of-band noise and high jitter tolerance. These features target audio systems where converter noise, clock jitter, and spectral purity influence recording and playback quality.
The AK4528VM supports 24-bit audio data and operation up to 96 kHz. Its sigma-delta conversion approach places noise shaping around the audio band, while the multistage DAC architecture reduces out-of-band energy and improves tolerance to timing variation. Exact dynamic-range, distortion, clock, voltage, and power-consumption limits should be taken from the manufacturer datasheet for the selected operating mode.
Typical uses include stereo recording-system analog front ends, digital mixing consoles, professional audio interfaces, studio monitors, and multichannel digital recording equipment. The AK4528VM is particularly relevant when one board-level component must provide both analog-to-digital and digital-to-analog conversion with a common serial audio architecture.
The 28-pin SSOP package supports conventional surface-mount assembly but requires careful analog-layout practices. Differential and balanced analog paths should be routed away from the serial clock and data lines, while grounding, decoupling, and return paths should follow the recommended application circuit. The AK4528VM suffix denotes a cut-tape shipping configuration, so production purchasing should also account for reel orientation and exposed-pad requirements if an exposed pad is specified for the assembled PCB.
For design planning, this product overview combines the verified 24-bit, 96 kHz, stereo-converter, package, and converter-architecture characteristics with application guidance and a package-compatible product comparison. Engineers should use the AKM Semiconductor datasheet for final electrical limits, recommended operating conditions, pin assignments, and layout values before releasing a production schematic.
এর জন্য ড্রপ-ইন বিকল্প AK4528VM — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible AK4528VM (একই form factor এবং footprint) — পার্থক্য রয়েছে ADC Architecture, DAC Architecture, Package.
AK4528VF
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AK4528VM বিশেষণ
| Audio Codec Architecture | Stereo ADC and DAC with serial digital audio interface |
| ADC Resolution | 24 bit |
| DAC Resolution | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of ADC Channels | 1 stereo ADC |
| Number of DAC Channels | 1 stereo DAC |
| Conversion Architecture | Sigma-delta |
| ADC Architecture | Enhanced Dual Bit architecture |
| DAC Architecture | Advanced Multi Bit architecture |
| DAC Filtering Method | SCF switched-capacitor-filter technique |
| Digital Audio Interface | Serial |
| প্যাকেজ | 28-pin SSOP, 0.65 mm pitch, 5.30 mm body width |
| Package Width | 5.30 mm |
| Package Pitch | 0.65 mm |
| মাউন্টিং টাইপ | Surface mount |
| Shipping Configuration | Cut Tape |
| Product Status | Obsolete |
AK4528VM 0.65 mm পিন কনফিগারেশন গাইড
AK4528VM (0.65 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK4528VM.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AK4528VM এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Stereo Recording-System Front End, Digital Mixing Console, Professional Audio Interface, Studio Monitor Controller, Digital Audio Recording Equipment, High-Quality Audio DAC Platform.
Stereo Recording-System Front End
The AK4528VM fits a stereo recording front end because it integrates one 24-bit ADC and one 24-bit DAC with serial digital audio and operation up to 96 kHz. Place the codec near the balanced input and output stages, then route its digital interface to the system converter or processor. Its Enhanced Dual Bit ADC architecture supports wide dynamic range, while the Advanced Multi Bit DAC and SCF filtering provide low out-of-band noise and high jitter tolerance. This combination is useful where a compact bidirectional analog-to-digital and digital-to-analog path is required. Final input range, clocking, latency, and channel count should be confirmed against the manufacturer datasheet.
সুপারিশকৃত
Digital Mixing Console
The AK4528VM can serve as the local audio conversion element in a digital mixing console when the design requires 24-bit stereo conversion at rates as high as 96 kHz. Its integrated ADC and DAC reduce the number of separate converter packages, while the serial digital interface connects the codec to mixing or routing logic. The sigma-delta ADC path and multistage DAC architecture are relevant to conserving audio-band signal quality. Keep the codec analog section separated from high-energy digital clock and switching paths, and implement the manufacturer’s recommended decoupling and grounding arrangement.
সুপারিশকৃত
Professional Audio Interface
The AK4528VM is applicable to a professional stereo audio interface when the required conversion format is 24-bit serial audio at up to 96 kHz. The device can convert two analog channels into digital data and provide two reconstructed analog outputs without separate ADC and DAC packages. Its Enhanced Dual Bit ADC architecture and Advanced Multi Bit DAC support low-noise operation, and the stated SCF implementation emphasizes low out-of-band energy and jitter tolerance. These characteristics are useful in interfaces connecting studio-grade analog equipment to a digital workstation. Signal conditioning, reference clocking, and balanced-output implementation remain separate analog-design tasks.
সুপারিশকৃত
Studio Monitor Controller
The AK4528VM can be used in a studio monitor controller when digital audio playback and optional analog re-capture are needed within one compact device. Its stereo DAC supports 24-bit audio at up to 96 kHz, while the stereo ADC can return monitoring or measurement signals to a digital control path. The Advanced Multi Bit DAC architecture, low out-of-band noise, and high jitter tolerance are especially relevant to a clean monitor signal chain. Place analog output drivers near the codec rather than routing long analog traces through the digital section, and follow the manufacturer’s application circuit for supply, reference, and analog-output stabilization components.
সুপারিশকৃত
Digital Audio Recording Equipment
The AK4528VM supports digital recording equipment that must capture and replay 24-bit stereo audio at rates up to 96 kHz. A single codec provides the conversion boundary between analog line-level circuitry and the digital recording processor, reducing board area and interface count. The ADC’s wide-dynamic-range architecture and the DAC’s low out-of-band-noise design support high-fidelity recording workflows. Clock synchronization is especially important because the DAC’s jitter tolerance is a stated design feature; therefore, distribute the system clock carefully and keep digital return paths away from sensitive analog inputs. Validate latency, startup behavior, and channel mapping during hardware bring-up.
সুপারিশকৃত
High-Quality Audio DAC Platform
The AK4528VM is suitable for a dedicated audio DAC platform centered on the Advanced Multi Bit DAC architecture. Its 24-bit, 96 kHz conversion capability is appropriate for playback systems requiring a compact multistage sigma-delta output stage, while the integrated ADC can support monitoring when the design needs it. The SCF-based DAC filtering and high jitter tolerance are intended to improve out-of-band behavior and clock robustness. A successful implementation depends on clean analog output topology, stable supplies, careful clock routing, and output-filter selection defined by the datasheet. Because the part is obsolete, confirm lifecycle and sourcing before beginning a new production platform.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK4528VM — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | AK4528VF |
|---|---|---|
| Brand | AKM Semiconductor | AKM Semiconductor |
| Package | 28-SSOP | 28-SSOP |
| ADC Resolution | 24 bit | 24 bit |
| DAC Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz |
| ADC and DAC Configuration | 1 stereo ADC / 1 stereo DAC | 1 stereo ADC / 1 stereo DAC |
| Data Interface | Serial | Serial |
| Conversion Architecture | Sigma-delta | Sigma-delta |
| Product Status | Obsolete | Obsolete |
| Ordering and Shipping Format | Cut Tape | Consumer Circuit packaging designation |
মূল পার্থক্যসমূহ
- Bidirectional stereo conversion in one package (বনামAK4528VF)
- Advanced multistage DAC implementation (বনামAK4528VF)
- Wide-dynamic-range ADC architecture (বনামAK4528VF)
ডিজাইন নোট
Separate the AK4528VM analog signal paths from serial clock and data routing to reduce coupled noise and crosstalk. Place input and output network components close to their associated codec pins, maintain continuous ground references, and avoid routing sensitive analog traces beneath digital clock nets. The package’s 0.65 mm pitch also makes careful assembly and fine-pitch layout review important.
Use separate analog and digital supply branches with local bypass capacitors positioned at the appropriate codec pins. Follow the manufacturer application circuit for component values and grounding topology rather than selecting capacitors solely by package size. Pay particular attention to startup, supply sequencing, and the behavior of the analog and digital domains because incorrect rail relationships can affect converter operation and audio-signal integrity.
Treat the digital audio clock as a high-priority signal because the AK4528VM DAC is specifically described as having high jitter tolerance. Route the clock through a controlled impedance path, minimize stub branches, and keep return-current paths continuous. Test the assembled board for clock-edge degradation and out-of-band spectral energy because a visually correct schematic can still compromise converter performance through poor clock distribution.
কমপ্লায়েন্স তথ্য
The accessible product information does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain a current manufacturer material declaration before making a compliance claim.