AKM Semiconductor

AK4528VM 24-Bit 96kHz Stereo Audio Codec | AKM Semiconductor

MPN: AK4528VM ✗ 停產
28-pin SSOP, 0.65 mm pitch, 5.30 mm body width Package
MOQ: 1 |

AK4528VM 概覽

AKM Semiconductor AK4528VM is a high-performance 24-bit, 96 kHz stereo audio codec integrating one analog-to-digital converter and one digital-to-analog converter in a 28-pin SSOP package. The device supports serial digital audio, sigma-delta conversion, and a sampling rate of 96 kHz for professional recording, playback, and signal-conversion equipment.

An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog output. In the broader semiconductor hierarchy, the AK4528VM belongs to the audio-codec class of interface ICs, combining data converters, digital interfaces, analog circuitry, and clocking functions within one device.

The ADC uses AKM's Enhanced Dual Bit architecture and is described as providing a wide dynamic range. The DAC uses the Advanced Multi Bit architecture with switched-capacitor-filter techniques to achieve low out-of-band noise and high jitter tolerance. These features target audio systems where converter noise, clock jitter, and spectral purity influence recording and playback quality.

The AK4528VM supports 24-bit audio data and operation up to 96 kHz. Its sigma-delta conversion approach places noise shaping around the audio band, while the multistage DAC architecture reduces out-of-band energy and improves tolerance to timing variation. Exact dynamic-range, distortion, clock, voltage, and power-consumption limits should be taken from the manufacturer datasheet for the selected operating mode.

Typical uses include stereo recording-system analog front ends, digital mixing consoles, professional audio interfaces, studio monitors, and multichannel digital recording equipment. The AK4528VM is particularly relevant when one board-level component must provide both analog-to-digital and digital-to-analog conversion with a common serial audio architecture.

The 28-pin SSOP package supports conventional surface-mount assembly but requires careful analog-layout practices. Differential and balanced analog paths should be routed away from the serial clock and data lines, while grounding, decoupling, and return paths should follow the recommended application circuit. The AK4528VM suffix denotes a cut-tape shipping configuration, so production purchasing should also account for reel orientation and exposed-pad requirements if an exposed pad is specified for the assembled PCB.

For design planning, this product overview combines the verified 24-bit, 96 kHz, stereo-converter, package, and converter-architecture characteristics with application guidance and a package-compatible product comparison. Engineers should use the AKM Semiconductor datasheet for final electrical limits, recommended operating conditions, pin assignments, and layout values before releasing a production schematic.

直接替換替代品,適用於 AK4528VM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AK4528VM (相同外形與佔位) — 差異在於 ADC Architecture, DAC Architecture, Package.

AKM (Asahi Kasei Microdevices)
ADC Architecture: Enhanced Dual Bit (switched-capacitor delta-sigma)
DAC Architecture: Advanced Multi Bit with SCF output
Package: LSSOP-28 (PDSO28, 0.65 mm pitch)
比較對象 AK4528VM →

AK4528VF

✅ 直接替換
AKM (Asahi Kasei Microdevices)
📦 28-SSOP
Audio CODEC (ADC + DAC) · 24-bit · 1 (stereo) · 1 (stereo) · Enhanced Dual Bit (switched-capacitor delta-sigma) · Advanced Multi Bit with SCF output · 96 kHz · Serial audio (audio-specific serial interface)

聯絡詢價

查看資料表 →

AK4528VM 規格

Audio Codec Architecture Stereo ADC and DAC with serial digital audio interface
ADC Resolution 24 bit
DAC Resolution 24 bit
Maximum Sampling Rate 96 kHz
Number of ADC Channels 1 stereo ADC
Number of DAC Channels 1 stereo DAC
Conversion Architecture Sigma-delta
ADC Architecture Enhanced Dual Bit architecture
DAC Architecture Advanced Multi Bit architecture
DAC Filtering Method SCF switched-capacitor-filter technique
Digital Audio Interface Serial
封裝 28-pin SSOP, 0.65 mm pitch, 5.30 mm body width
Package Width 5.30 mm
Package Pitch 0.65 mm
安裝類型 Surface mount
Shipping Configuration Cut Tape
Product Status Obsolete

AK4528VM 0.65 mm 腳位配置指南

AK4528VM(0.65 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

AK4528VM 的 0.65 mm 封裝腳位圖

無詳細腳位定義資料: AK4528VM.

請參閱 資料表 以查看完整腳位配置。

典型應用

AK4528VM 適用於 6 應用s: Stereo Recording-System Front End, Digital Mixing Console, Professional Audio Interface, Studio Monitor Controller, Digital Audio Recording Equipment, High-Quality Audio DAC Platform.

🎧

Stereo Recording-System Front End

The AK4528VM fits a stereo recording front end because it integrates one 24-bit ADC and one 24-bit DAC with serial digital audio and operation up to 96 kHz. Place the codec near the balanced input and output stages, then route its digital interface to the system converter or processor. Its Enhanced Dual Bit ADC architecture supports wide dynamic range, while the Advanced Multi Bit DAC and SCF filtering provide low out-of-band noise and high jitter tolerance. This combination is useful where a compact bidirectional analog-to-digital and digital-to-analog path is required. Final input range, clocking, latency, and channel count should be confirmed against the manufacturer datasheet.

🎚️

Digital Mixing Console

The AK4528VM can serve as the local audio conversion element in a digital mixing console when the design requires 24-bit stereo conversion at rates as high as 96 kHz. Its integrated ADC and DAC reduce the number of separate converter packages, while the serial digital interface connects the codec to mixing or routing logic. The sigma-delta ADC path and multistage DAC architecture are relevant to conserving audio-band signal quality. Keep the codec analog section separated from high-energy digital clock and switching paths, and implement the manufacturer’s recommended decoupling and grounding arrangement.

🔊

Professional Audio Interface

The AK4528VM is applicable to a professional stereo audio interface when the required conversion format is 24-bit serial audio at up to 96 kHz. The device can convert two analog channels into digital data and provide two reconstructed analog outputs without separate ADC and DAC packages. Its Enhanced Dual Bit ADC architecture and Advanced Multi Bit DAC support low-noise operation, and the stated SCF implementation emphasizes low out-of-band energy and jitter tolerance. These characteristics are useful in interfaces connecting studio-grade analog equipment to a digital workstation. Signal conditioning, reference clocking, and balanced-output implementation remain separate analog-design tasks.

📺

Studio Monitor Controller

The AK4528VM can be used in a studio monitor controller when digital audio playback and optional analog re-capture are needed within one compact device. Its stereo DAC supports 24-bit audio at up to 96 kHz, while the stereo ADC can return monitoring or measurement signals to a digital control path. The Advanced Multi Bit DAC architecture, low out-of-band noise, and high jitter tolerance are especially relevant to a clean monitor signal chain. Place analog output drivers near the codec rather than routing long analog traces through the digital section, and follow the manufacturer’s application circuit for supply, reference, and analog-output stabilization components.

💾

Digital Audio Recording Equipment

The AK4528VM supports digital recording equipment that must capture and replay 24-bit stereo audio at rates up to 96 kHz. A single codec provides the conversion boundary between analog line-level circuitry and the digital recording processor, reducing board area and interface count. The ADC’s wide-dynamic-range architecture and the DAC’s low out-of-band-noise design support high-fidelity recording workflows. Clock synchronization is especially important because the DAC’s jitter tolerance is a stated design feature; therefore, distribute the system clock carefully and keep digital return paths away from sensitive analog inputs. Validate latency, startup behavior, and channel mapping during hardware bring-up.

⚡

High-Quality Audio DAC Platform

The AK4528VM is suitable for a dedicated audio DAC platform centered on the Advanced Multi Bit DAC architecture. Its 24-bit, 96 kHz conversion capability is appropriate for playback systems requiring a compact multistage sigma-delta output stage, while the integrated ADC can support monitoring when the design needs it. The SCF-based DAC filtering and high jitter tolerance are intended to improve out-of-band behavior and clock robustness. A successful implementation depends on clean analog output topology, stable supplies, careful clock routing, and output-filter selection defined by the datasheet. Because the part is obsolete, confirm lifecycle and sourcing before beginning a new production platform.

What is the AK4528VM?
The AK4528VM is a high-performance stereo audio codec that combines a 24-bit ADC, a 24-bit DAC, and a serial digital audio interface. According to the AKM Semiconductor AK4528 datasheet, it supports audio sampling up to 96 kHz and uses sigma-delta conversion, making it suitable for recording systems, digital consoles, professional audio interfaces, and studio playback equipment.
What are the key specifications of AK4528VM that engineers should know?
The AK4528VM supports 24-bit audio, operation up to 96 kHz, one stereo ADC, one stereo DAC, and a serial interface in a 28-pin SSOP package. The AKM Semiconductor datasheet identifies an Enhanced Dual Bit ADC architecture and an Advanced Multi Bit DAC using switched-capacitor-filter techniques. Exact dynamic range, distortion, supply voltage, and power specifications should be selected from the manufacturer rating tables for the operating configuration.
Where to download the AK4528VM datasheet PDF?
The AK4528VM datasheet PDF can be downloaded from the AKM Semiconductor document linked on this page. It contains the product description, converter architecture, electrical characteristics, pin descriptions, application information, and recommended circuits. Use the manufacturer document as the controlling source for voltage, current, clock, distortion, noise, and layout requirements before completing a production design.
Where can I find the AK4528VM pinout?
The AK4528VM pin assignments are defined in the pin-description and package sections of the AKM Semiconductor AK4528 datasheet. The device is packaged in a 28-pin SSOP with a 0.65 mm pitch and a 5.30 mm body width. Use the datasheet pin table to assign analog inputs, analog outputs, digital audio signals, power, ground, and control connections on the PCB.
What can replace the AK4528VM?
The AK4528VF is the closest documented package-family alternative to the AK4528VM, and both are identified as obsolete 24-bit, 96 kHz audio codecs in the same 28-pin SSOP product family. Confirm every analog, digital, power, and control connection against the manufacturer datasheets before substitution. Other codec families may require interface or layout changes and should not be treated as drop-in replacements without engineering review.
Is AK4528VM the same as AK4528VF?
The AK4528VM and AK4528VF belong to the same AK4528 audio-codec family and share the core 24-bit, 96 kHz, stereo sigma-delta codec configuration. Their ordering suffixes and packaging presentation differ, and both are listed as obsolete. Because MPN suffixes can also encode shipping, qualification, or lifecycle differences, verify the exact ordering table and pin compatibility before treating one as a direct replacement.
When should I choose the AK4528VM over another audio codec?
Choose the AK4528VM when a design specifically requires the documented AK4528 combination of a stereo 24-bit ADC, stereo 24-bit DAC, serial digital audio, and operation up to 96 kHz. It is particularly relevant to new designs that reproduce its proven converter topology and 28-pin SSOP layout. For volume production, first confirm lifecycle and sourcing because the AK4528VM is listed as obsolete.
Is the AK4528VM suitable for professional recording equipment?
The AK4528VM is suitable for professional recording functions when its electrical limits and signal-performance requirements meet the product specification. Its Enhanced Dual Bit ADC, Advanced Multi Bit DAC, sigma-delta conversion, and support for 24-bit audio at 96 kHz align with stereo recording-system requirements. Actual suitability depends on the required dynamic range, distortion, latency, clocking, and analog-noise performance for each product channel.
Where to buy the AK4528VM online?
Use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and the AK4528VM cut-tape configuration. Because this part is listed as obsolete, availability may be limited and should be confirmed before committing a production schedule. The request should include the exact MPN AK4528VM and the required quantity.
What is the price of the AK4528VM?
The AK4528VM is an obsolete catalog part, and no qualifying current quantity-break price is established for it. Use the Request a Quote form on this page to request the current unit price, minimum order quantity, availability, and any inspection or traceability requirements. Include the exact AK4528VM MPN and the required cut-tape shipment quantity in the request.
What is the lead time for the AK4528VM?
The current lead time for the AK4528VM must be confirmed for the requested quantity because the product is listed as obsolete. Submit the required quantity through the Request a Quote form on this page and specify whether unused production allowance or documented traceability is required. A confirmed quotation is preferable to assuming that remaining stock can support a production schedule.
Is the AK4528VM in stock?
The AK4528VM should be treated as an obsolete part, so stock cannot be inferred from general catalog availability. Use the Request a Quote form on this page to request the current on-hand quantity, factory-new condition, lot traceability, and shipment timing. Include the exact MPN and required order quantity so procurement can confirm whether the cut-tape configuration is available.
AK4528VM vs AK4528VF: which is better for a new design?
Neither AK4528VM nor AK4528VF should be selected automatically for a new design because both are identified as obsolete. The AK4528VM is ordered in a cut-tape presentation, while the AK4528VF is associated with the consumer-circuit packaging option. The practical choice depends on confirmed availability, the required assembly format, and a complete pin and electrical review of the exact ordering variant.
What is the best AKM Semiconductor equivalent for the AK4528VM?
The AK4528VF is the best documented AKM Semiconductor package-family equivalent because it is the directly compared member of the AK4528 28-pin SSOP codec family. The comparison identifies both parts as 24-bit, 96 kHz, stereo sigma-delta audio codecs, but also identifies both as obsolete. Verify the exact suffix, pinout, operating conditions, and supply availability before approving it as a replacement.
What does the AK4528VM Advanced Multi Bit DAC architecture provide?
The AK4528VM Advanced Multi Bit DAC architecture is intended to achieve low out-of-band noise and high jitter tolerance by using switched-capacifier-filter techniques. According to the AKM Semiconductor datasheet, this implementation is part of the 24-bit, 96 kHz DAC path. Its benefit is particularly relevant in professional audio systems where clock jitter and converter energy outside the audio band can degrade signal integrity.
Does the AK4528VM meet RoHS and automotive qualification requirements?
The AK4528VM documentation establishes its 24-bit, 96 kHz stereo codec function and obsolete lifecycle status, but it does not establish RoHS, REACH, or AEC-Q100 status in the accessible product information. Treat all three compliance attributes as unknown until confirmed by an AKM Semiconductor material declaration or current official product record. Automotive qualification must not be inferred from the audio-codec application.

工程參考資料,適用於 AK4528VM — 比較、設計指引及合規資訊。

選型指南

Choose the AK4528VM only when reproducing the established AK4528 design is preferable and the required 24-bit, 96 kHz stereo ADC/DAC functions and 28-pin SSOP layout match the target board. The AK4528VF is the documented same-family package alternative and can be considered when its ordering suffix, consumer-circuit packaging designation, and exact assembly requirements are acceptable. Both alternatives are listed as obsolete, so lifecycle and sourcing confirmation is mandatory for new production. Do not select a codec from another manufacturer solely because it also supports 24-bit audio; interface voltage, clock format, conversion architecture, analog pinout, and PCB compatibility must match before it can be considered a true drop-in replacement.

與替代品比較

參數 本產品 AK4528VF
Brand AKM Semiconductor AKM Semiconductor
Package 28-SSOP 28-SSOP
ADC Resolution 24 bit 24 bit
DAC Resolution 24 bit 24 bit
Maximum Sampling Rate 96 kHz 96 kHz
ADC and DAC Configuration 1 stereo ADC / 1 stereo DAC 1 stereo ADC / 1 stereo DAC
Data Interface Serial Serial
Conversion Architecture Sigma-delta Sigma-delta
Product Status Obsolete Obsolete
Ordering and Shipping Format Cut Tape Consumer Circuit packaging designation

主要差異化特點

  • Bidirectional stereo conversion in one package (對比AK4528VF)
  • Advanced multistage DAC implementation (對比AK4528VF)
  • Wide-dynamic-range ADC architecture (對比AK4528VF)

設計說明

Separate the AK4528VM analog signal paths from serial clock and data routing to reduce coupled noise and crosstalk. Place input and output network components close to their associated codec pins, maintain continuous ground references, and avoid routing sensitive analog traces beneath digital clock nets. The package’s 0.65 mm pitch also makes careful assembly and fine-pitch layout review important.

Use separate analog and digital supply branches with local bypass capacitors positioned at the appropriate codec pins. Follow the manufacturer application circuit for component values and grounding topology rather than selecting capacitors solely by package size. Pay particular attention to startup, supply sequencing, and the behavior of the analog and digital domains because incorrect rail relationships can affect converter operation and audio-signal integrity.

Treat the digital audio clock as a high-priority signal because the AK4528VM DAC is specifically described as having high jitter tolerance. Route the clock through a controlled impedance path, minimize stub branches, and keep return-current paths continuous. Test the assembled board for clock-edge degradation and out-of-band spectral energy because a visually correct schematic can still compromise converter performance through poor clock distribution.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The accessible product information does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain a current manufacturer material declaration before making a compliance claim.

相關搜尋

AK4528VM datasheet AK4528VM datasheet pdf AK4528VM pinout AK4528VM specifications AK4528VM 24 bit 96 kHz AK4528VM 28-SSOP AK4528VM equivalent AK4528VM replacement AK4528VM vs AK4528VF AK4528VM price AK4528VM stock AKM Semiconductor AK4528VM

相關元件與詞彙

AKM Semiconductor AK4528VM AK4528VF audio codec audio interface IC stereo ADC stereo DAC 24-bit converter 96 kHz sampling rate sigma-delta converter Enhanced Dual Bit architecture Advanced Multi Bit architecture switched-capacitor filter SCF serial digital audio audio dynamic range out-of-band noise jitter tolerance 28-SSOP SSOP package family surface-mount package professional recording system digital mixing console studio monitor semiconductor
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情