AKM (Asahi Kasei Microdevices)

AK5367AEF - 24-Bit Stereo ADC, 96 kHz | AKM

MPN: AK5367AEF ✗ জীবনকালের সমাপ্তি
3 V to 3.6 V Vdss 30-pin VSOP Package LRCK and BICK clock pins Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AK5367AEF সারাংশ

The Asahi Kasei Microdevices AK5367AEF is a high-performance 24-bit stereo analog-to-digital converter for consumer audio and digital recording systems, with a sampling rate of 32 kHz to 96 kHz, analog and digital supply voltages of 3 V to 3.6 V, an I2C interface, and a 30-pin VSOP package.

An ADC is an analog-to-digital converter, a data-conversion IC that samples continuous analog audio voltages and converts them into proportional digital values. The AK5367A belongs to the ADC and DAC hierarchy within data-conversion ICs, where it serves as the bridge between analog microphone or line-level audio and a digital audio processor. Its stereo architecture processes two audio channels while its I2C control interface allows a host controller to configure operating conditions and read device status.

The primary specifications are 24-bit resolution, a 32 kHz to 96 kHz sampling-rate range, and a 3 V to 3.6 V analog and digital operating range. The converter is intended for consumer audio and digital-recording applications where a compact surface-mount implementation, stereo capture, and high-resolution conversion are important. Its documented operating-temperature ordering option covers -20 °C to +85 °C.

The AK5367A provides separate analog and digital supply pins, supporting careful partitioning of analog signal paths and digital interfaces on a mixed-signal PCB. An I2C control path and I/O-oriented clock pins provide integration with audio codecs, digital signal processors, and embedded audio systems. The device also supports power-down control, allowing its digital filter to be reset when the power-down pin is asserted low.

Typical uses include digital microphones, USB or portable audio equipment, consumer recording systems, audio capture accessories, and stereo line-input converters. The 24-bit format supports high-resolution audio workflows, while the 96 kHz maximum sampling rate supports 48 kHz and 96 kHz digital-audio streams. The compact 30-pin VSOP with 0.65 mm pitch is suited to space-constrained boards requiring fine-pitch assembly.

Layout is critical because analog and digital supplies must be decoupled close to their corresponding pins, and high-speed signals require short controlled routes. Confirm the pin-description table in the manufacturer datasheet before assigning tracks or selecting the system clock. The PDN control net should be sequenced so that the required reset action follows power-up.

This product page organizes the documented AK5367AEF characteristics, package information, interface considerations, and practical application guidance. It also distinguishes verified drop-in replacements from merely similar converters, helping PCB designers avoid substitutions that differ in footprint, pin assignment, or audio interface behavior.

এর জন্য ড্রপ-ইন বিকল্প AK5367AEF — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible AK5367AEF (একই form factor এবং footprint) — পার্থক্য রয়েছে Converter Type, Package.

AKM (Asahi Kasei Microdevices)
Converter Type: 24-bit delta-sigma audio ADC
Package: 30-VSOP
এর সাথে তুলনা করুন AK5367AEF →

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

AK5367AEF সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Stereo ADC
রেজোলিউশন 24 bit
স্যাম্পলিং রেট 32 kHz to 96 kHz
Analog Supply Voltage 3 V to 3.6 V
Digital Supply Voltage 3 V to 3.6 V
ইন্টারফেস I2C
প্যাকেজ 30-pin VSOP
Package Pitch 0.65 mm
মাউন্টিং টাইপ Surface mount
অপারেটিং তাপমাত্রা -20 °C to +85 °C
Audio Channel Count 2 channels
Power-Down Control PDN pin active low
Digital Filter Reset Executed with power-down assertion
Clock Interface LRCK and BICK clock pins
Recommended Application Consumer audio and digital recording
Evaluation Board AKD5367
Order Code Temperature Range -20 °C to +85 °C

AK5367AEF 0.65 mm পিন কনফিগারেশন গাইড

AK5367AEF (0.65 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AK5367AEF-এর জন্য 0.65 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK5367AEF.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AK5367AEF এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB Audio Recording, Digital Microphone Interface, Portable Audio Player, Consumer Audio Capture Accessory, Audio Test and Measurement, Studio Monitoring Interface.

🎧

USB Audio Recording

The AK5367AEF fits a stereo USB-audio capture path because it converts two analog channels at 24-bit resolution and supports sampling rates from 32 kHz to 96 kHz. It can sit after a balanced or line-level analog front end and before a USB audio controller, while I2C provides configuration access from the host device. According to the Asahi Kasei Microdevices datasheet, the operating range is 3 V to 3.6 V, so the analog and digital rails should be decoupled independently. The principal design consideration is clock synchronization: the converter must receive valid LRCK and BICK signals or operate according to the documented master-mode arrangement without allowing digital return current to disturb the analog input stage.

🎤

Digital Microphone Interface

The AK5367AEF is suitable for a stereo digital-microphone capture design when the transducer or microphone preamplifier produces compatible analog signals. Its 24-bit conversion resolution preserves fine amplitude detail, while the 32 kHz to 96 kHz range supports standard voice, music, and studio-rate recording workflows. According to the Asahi Kasei Microdevices documentation, the IC provides separate analog and digital supply domains and an I2C interface for host control. The analog path must remain short and referenced cleanly to the converter ground, while the I2C and clock traces should be routed away from microphone inputs to reduce coupled disturbance and preserve recording-headroom performance.

📱

Portable Audio Player

The AK5367AEF can serve as the recording-side ADC in a portable audio player that accepts line input from an external source. Its 3 V to 3.6 V analog and digital operating range suits compact systems with a low-voltage audio bus, while the 30-pin VSOP package limits board area compared with a larger converter. According to the Asahi Kasei Microdevices datasheet, the device supports 24-bit stereo operation up to 96 kHz. A portable implementation should account for the converter's clock requirement, active-low power-down behavior, and the need to reset the digital filter after power-up before the host begins capturing audio.

🎧

Consumer Audio Capture Accessory

The AK5367AEF is appropriate for a consumer digital-recording accessory that converts stereo line-level audio into a 24-bit digital stream. The supported 32 kHz to 96 kHz range allows the same converter family to serve voice, compact-disc-rate, and high-resolution recording modes. According to the Asahi Kasei Microdevices documentation, the part includes an I2C interface for configuration and clock connections for synchronizing the conversion process. The accessory designer should define analog gain and attenuation before the ADC, isolate clock and digital activity from the input traces, and use the manufacturer pin table to preserve compatibility with the 30-pin, 0.65 mm-pitch VSOP land pattern.

🔧

Audio Test and Measurement

The AK5367AEF can be used in an audio measurement front end where a 24-bit stereo converter is required to capture signals at 32 kHz to 96 kHz. Its resolution provides a suitable conversion format for measurement and monitoring equipment, while the I2C interface can support host-controlled configuration. According to the Asahi Kasei Microdevices datasheet, the AKD5367 evaluation board is intended for evaluating the AK5367A family. Instrument designers should verify the applicable input bandwidth, dynamic-range test conditions, clock jitter sensitivity, and grounding arrangement from the manufacturer datasheet before defining the measurement front end.

🖥️

Studio Monitoring Interface

The AK5367AEF is suitable for the input-conversion stage of a studio monitoring interface when 24-bit stereo capture and sampling rates through 96 kHz are required. The converter can feed a digital audio processor or recording engine, and its I2C interface permits centralized configuration. According to the Asahi Kasei Microdevices datasheet, the device operates from 3 V to 3.6 V and includes power-down control. In a studio-oriented product, analog input routing should minimize interference from display, power-converter, and digital-clock circuitry. The implementation should also include stable references, local supply decoupling, and a documented startup sequence to ensure the digital filter is reset correctly.

What is the AK5367AEF?
The AK5367AEF is a 24-bit stereo analog-to-digital converter operating at sampling rates from 32 kHz to 96 kHz. According to the Asahi Kasei Microdevices datasheet, it targets consumer-audio and digital-recording equipment and uses a 30-pin VSOP package. The converter operates from 3 V to 3.6 V for both analog and digital supplies and includes an I2C control interface.
What are the key specifications of AK5367AEF that engineers should know?
The AK5367AEF is a 24-bit stereo ADC with a 32 kHz to 96 kHz sampling range, 3 V to 3.6 V analog and digital supplies, an I2C interface, and a 30-pin VSOP package at 0.65 mm pitch. According to the Asahi Kasei Microdevices datasheet, its documented ordering temperature range is -20 °C to +85 °C. These parameters define its audio-conversion capability, mixed-signal supply requirements, control method, and PCB footprint.
Where can I download the AK5367AEF datasheet PDF?
The AK5367AEF datasheet PDF can be opened from the document link associated with the AK5367AEF technical-specification page. According to the Asahi Kasei Microdevices documentation, the AK5367A family is a 24-bit, 96 kHz stereo ADC with a 30-pin VSOP package. Use the pin-description and ordering-information tables in that document when designing or checking an existing PCB.
Where is the AK5367AEF pinout located?
The AK5367AEF pinout is located in the pin-description table of the manufacturer datasheet, which identifies the 30-pin VSOP connections and functions such as LRCK and BICK. According to the Asahi Kasei Microdevices documentation, the package uses a 0.65 mm pitch. Use that table to assign every PCB track, especially analog inputs, supply pins, clock signals, and the active-low PDN control.
What supply voltage does the AK5367AEF require?
The AK5367AEF requires a 3 V to 3.6 V analog supply and a 3 V to 3.6 V digital supply. According to the Asahi Kasei Microdevices product documentation, both supply domains are identified separately. Decoupling capacitors should be placed close to their associated supply pins, with the analog and digital return paths arranged to avoid injecting converter-clock noise into the input stage.
What sample rates and resolution does the AK5367AEF support?
The AK5367AEF supports 32 kHz to 96 kHz sampling and provides 24-bit digital resolution. According to the Asahi Kasei Microdevices datasheet, it is a stereo ADC intended for consumer-audio and digital-recording applications. Its output can therefore carry two 24-bit channels at rates commonly associated with 48 kHz and 96 kHz digital-audio workflows.
What is the AK5367AEF interface?
The AK5367AEF uses an I2C control interface and provides dedicated audio-clock connections including LRCK and BICK. According to the Asahi Kasei Microdevices datasheet, LRCK can operate as an output in master mode, while the device also supports slave-mode clock arrangements. The host controller should use the documented register map and timing values when configuring the converter.
Can AK5367AEF be used in digital recording equipment?
Yes, the AK5367AEF is specifically identified for consumer-audio and digital-recording applications. Its 24-bit stereo conversion, 32 kHz to 96 kHz sampling range, and compact 30-pin VSOP package support compact high-resolution recording products. According to the Asahi Kasei Microdevices datasheet, the AKD5367 evaluation board is available for evaluating the AK5367A family.
What is the difference between AK5367AEF and a generic stereo ADC?
The AK5367AEF combines 24-bit stereo conversion, sampling rates up to 96 kHz, separate 3 V to 3.6 V analog and digital supplies, an I2C interface, and a 30-pin VSOP footprint. These features position it for consumer-audio and digital-recording products. A generic stereo ADC may differ in clock architecture, control register behavior, analog performance, pin assignment, and package dimensions, so an electrical match alone does not establish drop-in compatibility.
Can AK5367AEF replace a 30-VSOP audio converter?
A 30-VSOP audio converter is not automatically a drop-in replacement for the AK5367AEF. According to the Asahi Kasei Microdevices pin information, compatibility requires matching the 30-pin VSOP footprint, 0.65 mm pitch, analog and digital input assignments, clock pins, I2C addresses, register behavior, and supply requirements. No verified same-footprint replacement was identified for the AK5367AEF.
What is the best drop-in replacement for AK5367AEF?
No verified drop-in replacement for the AK5367AEF is currently identified. The device is obsolete, and the available cross-reference material does not establish a competing 30-pin VSOP converter with identical pin assignment, 24-bit resolution, 96 kHz sampling capability, clocking, and I2C control. A candidate should be treated as a functional alternative until its package drawing, datasheet, and register behavior are reviewed.
Is AK5367AEF suitable for a microphone preamp design?
The AK5367AEF can suit a stereo analog-audio capture stage when its input, clock, and power requirements match the selected preamplifier. According to the Asahi Kasei Microdevices datasheet, it performs 24-bit stereo conversion from 32 kHz to 96 kHz. The designer must still verify analog input range, permitted biasing, acquisition timing, and clock synchronization against the preamp output.
AK5367AEF vs AK5367AEF-20: which ordering option fits the application?
The AK5367AEF and AK5367AEF-20 ordering notation must be matched against the manufacturer ordering guide before substitution. The documented AK5367A family ordering information associates AK5367AEF-20 with a -20 °C to +85 °C range and a 30-pin VSOP package at 0.65 mm pitch. Because this is an ordering-code distinction rather than a confirmed independent drop-in part, verify the exact internal part number and lot designation before release.
Where can I buy AK5367AEF and how long is the lead time?
Use the Request a Quote form on this page to ask about AK5367AEF availability, minimum order quantity, current lead time, and obsolete-part handling. The manufacturer listing identifies AK5367AEF as obsolete, so availability may be limited and lifecycle-dependent. Current procurement details should be confirmed through the quote process rather than inferred from historical distributor listings or unverified stock messages.
What is the current price of AK5367AEF?
The current commercial price for the obsolete AK5367AEF should be requested through the Request a Quote form on this page. The quote can reflect the required quantity, package, shipment destination, and traceability requirements. Historical prices are not used as a present-day quotation because obsolete inventory can vary materially in condition, lot traceability, and availability.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK5367AEF — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AK5367AEF when a design requires a 24-bit stereo ADC with sampling rates from 32 kHz to 96 kHz, 3 V to 3.6 V analog and digital operation, I2C control, and a 30-pin VSOP footprint. It is particularly appropriate for obsolete consumer-audio, digital-recording, microphone-interface, and portable-audio products that already use the documented pin arrangement and clocking method. The AKD5367 evaluation board is useful for validating the conversion path before connecting it to the final system.

Do not select a replacement solely because it is a stereo ADC with a similar resolution. A true drop-in alternative must match the 30-pin, 0.65 mm-pitch VSOP land pattern, analog input assignments, LRCK and BICK behavior, I2C address and registers, PDN polarity, supply levels, and startup requirements. No competing part is currently verified as meeting those constraints. Until a qualified alternative is documented, existing production demand is best handled as an obsolete-part procurement exercise with an incoming-inspection and traceability plan.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Asahi Kasei Microdevices
Package 30-pin VSOP
Package Pitch 0.65 mm
Converter Type Stereo ADC
Resolution 24 bit
Sampling Rate 32 kHz to 96 kHz
Analog Supply Voltage 3 V to 3.6 V
Digital Supply Voltage 3 V to 3.6 V
Control Interface I2C
Operating Temperature -20 °C to +85 °C

ডিজাইন নোট

Place the analog and digital bypass capacitors directly beside their corresponding supply pins, and keep the analog input traces short and away from LRCK, BICK, and I2C routing. Use the pin-description table in the manufacturer datasheet when assigning the 30-pin, 0.65 mm-pitch VSOP land pattern. The analog and digital grounds should meet according to the recommended application circuit so that converter return current does not flow through the sensitive input reference path.

Use a low-noise 3 V to 3.6 V supply for the analog domain and a separate 3 V to 3.6 V rail for the digital domain. The two domains should be decoupled at the package pins even if they share a source. Power sequencing must satisfy the manufacturer's startup procedure, and the digital filter must be reset after power-up before normal conversion begins. Treat PDN as active low and avoid pulling it to an undefined state during reset.

Route LRCK and BICK as short, continuous clock traces and use the manufacturer's timing values to determine whether additional source termination or series damping is necessary. Keep I2C routing separate from the analog input network where practical. Because the converter can operate up to 96 kHz, clock jitter and coupling from adjacent digital circuitry can affect capture performance even when nominal resolution and sample-rate settings are correct.

Do not substitute a generic 30-pin VSOP audio converter without checking the complete pin-description table, package drawing, supply levels, clock mode, I2C address, register map, and control-signal polarity. Matching the number of pins and the sampling rate alone is insufficient for drop-in qualification. Because AK5367AEF is obsolete, an incoming alternative should also be reviewed for lifecycle risk and long-term availability before production release.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The product is an obsolete consumer-audio ADC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the manufacturer or distributor documentation represented for this part.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AK5367AEF datasheet AK5367AEF datasheet pdf AK5367AEF pinout AK5367AEF 30 VSOP pinout AK5367AEF specifications AK5367AEF 24 bit 96 kHz AK5367AEF replacement AK5367AEF equivalent AK5367AEF cross reference AK5367AEF price AK5367AEF stock AK5367AEF audio converter

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Asahi Kasei Microdevices AK5367AEF AK5367A AKD5367 stereo ADC analog-to-digital converter data-conversion IC ADC DAC mixed-signal semiconductor 24-bit resolution 32 kHz to 96 kHz sampling I2C LRCK BICK PDN power-down control 30-pin VSOP 0.65 mm package pitch surface-mount package consumer audio digital recording digital microphone analog supply digital supply
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন