AT90USB1286-AUR - 128KB USB 2.0 AVR MCU | Microchip
MPN: AT90USB1286-AUR ✓ সক্রিয়AT90USB1286-AUR সারাংশ
An 8-bit microcontroller is a programmable semiconductor that executes instructions from nonvolatile flash memory and uses SRAM for working data. The AT90USB1286 belongs to the AVR family of RISC microcontrollers and combines general-purpose embedded processing with a dedicated USB device controller. This integration allows a single device to manage application logic, peripheral control, data acquisition, and direct USB communication without a separate USB interface controller.
Its 128KB in-system programmable flash supports read-while-write operation, while the optional boot-code section, independent lock bits, and factory-programmed USB bootloader simplify firmware development and production programming. The 10-bit ADC provides eight channels for analog measurement, and the four flexible timer/counters support compare modes and PWM output. USART and two-wire serial interfaces expand the available communication options for sensors, external memory, and industrial peripherals.
The enhanced AVR architecture provides an 8-bit RISC core operating at 16MHz, combining general-purpose embedded processing with dedicated USB device connectivity. Forty-eight general-purpose I/O lines support digital interfaces, while 32 general-purpose working registers help the core organize and manipulate data. The USB controller supports both low-speed and full-speed USB 2.0 device operation, making the device suitable for USB-connected control, measurement, and human-interface equipment.
Typical uses include USB keyboards and other human-interface devices, USB data-acquisition equipment, bootloaders, industrial interface controllers, communications equipment, and custom USB peripherals. The 128KB flash capacity is useful for protocol stacks, boot code, application firmware, and USB class drivers that must coexist within one compact controller.
PCB design should preserve high-speed USB signal integrity by routing D+ and D- as a short, tightly matched pair and placing the required USB transceiver support components near the controller. The 64-pin TQFP footprint also demands careful escape routing around the perimeter, while decoupling should be distributed close to supply pins. Use the manufacturer pin-description table and USB hardware guidance when assigning tracks and selecting protection components.
This product page combines the manufacturer’s core device specifications with practical USB layout guidance, interface-selection context, and structured comparisons of verified AT90USB family alternatives. It supports faster component identification while keeping the final schematic, footprint, firmware, and USB validation decisions with the engineer.
এর জন্য ড্রপ-ইন বিকল্প AT90USB1286-AUR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible AT90USB1286-AUR (একই form factor এবং footprint) — পার্থক্য রয়েছে EEPROM Memory, Flash Memory, Maximum Clock Frequency, Package, SRAM.
AT90USB1287-AUR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AT90USB1287-16AU
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AT90USB64-AUR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AT90USB64-16AU
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
AT90USB1286-AU
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →AT90USB1286-AUR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit RISC microcontroller with USB device controller |
| Architecture | AVR enhanced RISC |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 16MHz |
| Flash Memory | 128KB |
| EEPROM Memory | 4KB |
| SRAM | 8KB |
| General-Purpose I/O Lines | 48 |
| General-Purpose Working Registers | 32 |
| ADC Resolution | 10-bit |
| ADC Channels | 8 |
| Timer/Counters | 4 |
| USB Version | USB 2.0 |
| USB Operating Modes | Low-speed and full-speed device operation |
| Serial Interfaces | 1 USART and 1 byte-oriented two-wire serial interface |
| প্যাকেজ | 64-pin TQFP, 14mm x 14mm |
| Programming | In-system programming and USB bootloader |
| Flash Read-While-Write | Supported |
| Flash Endurance | 100,000 write/erase cycles |
AT90USB1286-AUR 64-pin tqfp, 14mm x 14mm পিন কনফিগারেশন গাইড
AT90USB1286-AUR (64-pin tqfp, 14mm x 14mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AT90USB1286-AUR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AT90USB1286-AUR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB Human-Interface Controller, USB Data-Acquisition System, Industrial USB Interface Controller, USB Bootloader and Firmware Recovery, Communications and Sensor Hub, Custom USB Embedded Peripheral.
USB Human-Interface Controller
The AT90USB1286-AUR fits USB keyboard and control-device designs because it combines USB 2.0 device operation with 48 general-purpose I/O lines and four timer/counters. Its 16MHz AVR core can scan switches and debounce inputs while USB handles enumeration and data exchange. The 128KB flash capacity also provides room for boot code, descriptors, and application firmware. On the PCB, maintain a short USB differential pair and use the manufacturer pin assignments for D+, D-, VBUS, and firmware programming.
সুপারিশকৃত
USB Data-Acquisition System
The AT90USB1286-AUR is suitable for USB-connected measurement equipment because it combines eight 10-bit ADC channels with 128KB of flash, 8KB SRAM, and full-speed USB device capability. The MCU can acquire analog inputs, perform control calculations, and transmit results to a host computer. Timers and PWM outputs can also coordinate sampling or excitation, while USART and two-wire interfaces allow additional sensors. Validate ADC reference and input limits against the datasheet before defining analog front-end scaling.
সুপারিশকৃত
Industrial USB Interface Controller
The AT90USB1286-AUR supports industrial peripheral designs that need USB connectivity alongside general-purpose embedded control. Forty-eight I/O lines, a USART, a two-wire serial interface, and four timer/counters allow it to supervise sensors, actuators, and external converters while communicating with a host over USB. Its 128KB flash can hold a bootloader and protocol stack. Engineers should provide local decoupling, robust connector protection, and verified isolation or grounding strategies for industrial environments.
সুপারিশকৃত
USB Bootloader and Firmware Recovery
The AT90USB1286-AUR is designed for applications requiring in-system programming and factory-configured USB boot support. The manufacturer datasheet describes a USB bootloader programmed by default, on-chip boot-programming hardware activated after reset, optional boot code with independent lock bits, and read-while-write flash. These features support firmware recovery, production programming, and field upgrades. Keep the bootloader signals accessible during manufacturing and validate the selected USB enumeration and signed-image workflow before shipping.
সুপারিশকৃত
Communications and Sensor Hub
The AT90USB1286-AUR can act as a USB-connected hub for serial sensors and embedded communications equipment. The USART supports traditional serial peripherals, the byte-oriented two-wire interface supports compatible devices, and eight 10-bit ADC channels add analog sensing. A host can configure the hub and collect measurements through USB while the MCU performs local filtering and control. Ensure line levels and pull-ups match the attached peripherals, and check timing margins for each selected bus.
সুপারিশকৃত
Custom USB Embedded Peripheral
The AT90USB1286-AUR is appropriate for custom USB peripherals that combine control logic with full-speed host connectivity. Its 32 working registers and 8KB SRAM support interrupt-driven data handling, while four timer/counters provide timing, compare, and PWM functions. The 128KB flash accommodates application firmware, USB descriptors, and a bootloader. Designers should test enumeration across intended host systems, implement the required USB descriptors, and preserve a controlled differential-pair layout from connector to controller.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AT90USB1286-AUR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | AT90USB1287-AUR | AT90USB1287-16AU | AT90USB64-AUR | AT90USB64-16AU | AT90USB1286-AU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP | 64-pin TQFP - same | 64-pin TQFP - same | 64-pin TQFP - same | 64-pin TQFP - same | 64-pin TQFP - same |
| Flash Memory | 128KB | 128KB | 128KB | 64KB | 64KB | 128KB |
| EEPROM Memory | 4KB | 4KB | 4KB | 2KB | 2KB | 4KB |
| SRAM | 8KB | 8KB | 8KB | 8KB | 8KB | 8KB |
| General-Purpose I/O Lines | 48 | 48 | 48 | 48 | 48 | 48 |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit |
| Clock Frequency | 16MHz | 16MHz | 16MHz | 16MHz | 16MHz | 16MHz |
| USB Capability | USB 2.0 low-speed and full-speed device | USB 2.0 low-speed and full-speed device | USB 2.0 low-speed and full-speed device | USB 2.0 low-speed and full-speed device | USB 2.0 low-speed and full-speed device | USB 2.0 low-speed and full-speed device |
মূল পার্থক্যসমূহ
- Twice the flash capacity of the AT90USB64 alternatives (বনামAT90USB64-AUR)
- Twice the EEPROM capacity of the AT90USB64 alternatives (বনামAT90USB64-16AU)
- Substantially greater nonvolatile memory than AT90USB64 alternatives (বনামAT90USB1287-AUR)
- Higher memory density without changing the 64-pin TQFP footprint (বনামAT90USB64-AUR)
ডিজাইন নোট
Route the USB differential pair as a short, tightly coupled pair on a continuous reference plane. Place USB connector and protection components near the board edge, avoid vias and stubs where practical, and keep switching-node paths and high-current return paths away from D+ and D-. Confirm the exact transceiver connections and impedance target using the manufacturer schematic and USB implementation guidance before release.
The 64-pin TQFP has fine-pitch leads on all four sides, so plan escape routing before fixing the PCB footprint. Keep programming, reset, clock, and USB traces accessible, maintain consistent clearances between adjacent nets, and use vias sparingly around exposed fanout areas. A manufacturer land pattern and drill table should be used directly rather than reconstructing dimensions from a generic TQFP template.
Do not assume that every AT90USB family member is firmware-identical. USB bootloader behavior differs among related devices, and the AT90USB64 variants provide 64KB flash and 2KB EEPROM rather than the target device’s 128KB flash and 4KB EEPROM. Review bootloader entry, fuse settings, USB descriptors, device identification, and firmware build targets before substituting a related ordering code.
Place local decoupling capacitors adjacent to the device’s supply pins and provide the clock and reset circuitry shown in the manufacturer reference design. USB bus-powered systems must also account for inrush, cable transients, and the voltage budget across protection devices and regulators. Confirm operating-current and USB-suspend limits from the electrical-characteristics tables rather than relying on the low-power feature description.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.