Microchip Technology

AT90USB1286-AUR - 128KB USB 2.0 AVR MCU | Microchip

Артикул: AT90USB1286-AUR ✓ Активен
64-pin TQFP, 14mm x 14mm Package 16MHz Speed 128KB Memory
MOQ: 1 |

AT90USB1286-AUR Обзор

The Microchip AT90USB1286-AUR is a low-power 8-bit AVR RISC microcontroller with 128KB of ISP flash memory, 8KB SRAM, 4KB EEPROM, and a 64-pin TQFP package. It operates at 16MHz and integrates USB 2.0 low-speed and full-speed device connectivity, 48 general-purpose I/O lines, 10-bit ADC channels, four timer/counters, USART, and a byte-oriented two-wire serial interface.

An 8-bit microcontroller is a programmable semiconductor that executes instructions from nonvolatile flash memory and uses SRAM for working data. The AT90USB1286 belongs to the AVR family of RISC microcontrollers and combines general-purpose embedded processing with a dedicated USB device controller. This integration allows a single device to manage application logic, peripheral control, data acquisition, and direct USB communication without a separate USB interface controller.

Its 128KB in-system programmable flash supports read-while-write operation, while the optional boot-code section, independent lock bits, and factory-programmed USB bootloader simplify firmware development and production programming. The 10-bit ADC provides eight channels for analog measurement, and the four flexible timer/counters support compare modes and PWM output. USART and two-wire serial interfaces expand the available communication options for sensors, external memory, and industrial peripherals.

The enhanced AVR architecture provides an 8-bit RISC core operating at 16MHz, combining general-purpose embedded processing with dedicated USB device connectivity. Forty-eight general-purpose I/O lines support digital interfaces, while 32 general-purpose working registers help the core organize and manipulate data. The USB controller supports both low-speed and full-speed USB 2.0 device operation, making the device suitable for USB-connected control, measurement, and human-interface equipment.

Typical uses include USB keyboards and other human-interface devices, USB data-acquisition equipment, bootloaders, industrial interface controllers, communications equipment, and custom USB peripherals. The 128KB flash capacity is useful for protocol stacks, boot code, application firmware, and USB class drivers that must coexist within one compact controller.

PCB design should preserve high-speed USB signal integrity by routing D+ and D- as a short, tightly matched pair and placing the required USB transceiver support components near the controller. The 64-pin TQFP footprint also demands careful escape routing around the perimeter, while decoupling should be distributed close to supply pins. Use the manufacturer pin-description table and USB hardware guidance when assigning tracks and selecting protection components.

This product page combines the manufacturer’s core device specifications with practical USB layout guidance, interface-selection context, and structured comparisons of verified AT90USB family alternatives. It supports faster component identification while keeping the final schematic, footprint, firmware, and USB validation decisions with the engineer.

Аналоги без доработки для AT90USB1286-AUR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с AT90USB1286-AUR (тот же форм-фактор и посадочное место) — отличается по EEPROM Memory, Flash Memory, Maximum Clock Frequency, Package, SRAM.

Microchip Technology
EEPROM Memory: 4 KB
Flash Memory: 128 KB
Maximum Clock Frequency: 16 MHz
Сравнить с AT90USB1286-AUR →

AT90USB1287-AUR

✅ Прямая замена
📦 64-pin TQFP
Same 128KB flash and 64-pin TQFP footprint; USB bootloader behavior differs, while core memory and I/O ratings remain equal

📋 Справочный аналог (нет в каталоге)

AT90USB1287-16AU

✅ Прямая замена
📦 64-pin TQFP
Same 16MHz class, USB interface, and 64-pin TQFP footprint; ordering suffix and USB bootloader configuration differ

📋 Справочный аналог (нет в каталоге)

AT90USB64-AUR

✅ Прямая замена
📦 64-pin TQFP
Flash is 64KB rather than 128KB and EEPROM is 2KB rather than 4KB, a 50% reduction in flash and EEPROM

📋 Справочный аналог (нет в каталоге)

AT90USB64-16AU

✅ Прямая замена
📦 64-pin TQFP
Flash is 64KB rather than 128KB and EEPROM is 2KB rather than 4KB; clock class and package remain compatible

📋 Справочный аналог (нет в каталоге)

AT90USB1286-AU

✅ Прямая замена
Microchip Technology
📦 64-pin TQFP
8-bit AVR RISC-based microcontroller · 16 MHz · 128 KB · 128K x 8 · ISP flash with read-while-write capability · 4 KB · 8 KB · 48

Уточнить цену

Открыть даташит →

AT90USB1286-AUR Максимальные параметры и электрические характеристики

Product Type 8-bit RISC microcontroller with USB device controller
Architecture AVR enhanced RISC
Максимальная тактовая частота 16MHz
Flash Memory 128KB
EEPROM Memory 4KB
SRAM 8KB
General-Purpose I/O Lines 48
General-Purpose Working Registers 32
ADC Resolution 10-bit
ADC Channels 8
Timer/Counters 4
USB Version USB 2.0
USB Operating Modes Low-speed and full-speed device operation
Serial Interfaces 1 USART and 1 byte-oriented two-wire serial interface
Корпус 64-pin TQFP, 14mm x 14mm
Programming In-system programming and USB bootloader
Flash Read-While-Write Supported
Flash Endurance 100,000 write/erase cycles

Руководство по цоколевке AT90USB1286-AUR в корпусе 64-pin tqfp, 14mm x 14mm

Цоколевка для AT90USB1286-AUR (корпус 64-pin tqfp, 14mm x 14mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 64-pin tqfp, 14mm x 14mm для AT90USB1286-AUR

Нет подробных данных о распиновке для AT90USB1286-AUR.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AT90USB1286-AUR подходит для 6 применениеs: USB Human-Interface Controller, USB Data-Acquisition System, Industrial USB Interface Controller, USB Bootloader and Firmware Recovery, Communications and Sensor Hub, Custom USB Embedded Peripheral.

🔧

USB Human-Interface Controller

The AT90USB1286-AUR fits USB keyboard and control-device designs because it combines USB 2.0 device operation with 48 general-purpose I/O lines and four timer/counters. Its 16MHz AVR core can scan switches and debounce inputs while USB handles enumeration and data exchange. The 128KB flash capacity also provides room for boot code, descriptors, and application firmware. On the PCB, maintain a short USB differential pair and use the manufacturer pin assignments for D+, D-, VBUS, and firmware programming.

📟

USB Data-Acquisition System

The AT90USB1286-AUR is suitable for USB-connected measurement equipment because it combines eight 10-bit ADC channels with 128KB of flash, 8KB SRAM, and full-speed USB device capability. The MCU can acquire analog inputs, perform control calculations, and transmit results to a host computer. Timers and PWM outputs can also coordinate sampling or excitation, while USART and two-wire interfaces allow additional sensors. Validate ADC reference and input limits against the datasheet before defining analog front-end scaling.

🏭

Industrial USB Interface Controller

The AT90USB1286-AUR supports industrial peripheral designs that need USB connectivity alongside general-purpose embedded control. Forty-eight I/O lines, a USART, a two-wire serial interface, and four timer/counters allow it to supervise sensors, actuators, and external converters while communicating with a host over USB. Its 128KB flash can hold a bootloader and protocol stack. Engineers should provide local decoupling, robust connector protection, and verified isolation or grounding strategies for industrial environments.

💾

USB Bootloader and Firmware Recovery

The AT90USB1286-AUR is designed for applications requiring in-system programming and factory-configured USB boot support. The manufacturer datasheet describes a USB bootloader programmed by default, on-chip boot-programming hardware activated after reset, optional boot code with independent lock bits, and read-while-write flash. These features support firmware recovery, production programming, and field upgrades. Keep the bootloader signals accessible during manufacturing and validate the selected USB enumeration and signed-image workflow before shipping.

🌐

Communications and Sensor Hub

The AT90USB1286-AUR can act as a USB-connected hub for serial sensors and embedded communications equipment. The USART supports traditional serial peripherals, the byte-oriented two-wire interface supports compatible devices, and eight 10-bit ADC channels add analog sensing. A host can configure the hub and collect measurements through USB while the MCU performs local filtering and control. Ensure line levels and pull-ups match the attached peripherals, and check timing margins for each selected bus.

🧩

Custom USB Embedded Peripheral

The AT90USB1286-AUR is appropriate for custom USB peripherals that combine control logic with full-speed host connectivity. Its 32 working registers and 8KB SRAM support interrupt-driven data handling, while four timer/counters provide timing, compare, and PWM functions. The 128KB flash accommodates application firmware, USB descriptors, and a bootloader. Designers should test enumeration across intended host systems, implement the required USB descriptors, and preserve a controlled differential-pair layout from connector to controller.

Сводка рекомендуемых товаров

AT90USB1286-AUR Microchip Technology Используется в: USB Human-Interface Controller, USB Data-Acquisition System, Industrial USB Interface Controller, USB Bootloader and Firmware Recovery, Communications and Sensor Hub, Custom USB Embedded Peripheral AT90USB1287-AUR Same-family alternative with different USB bootloader behavior Используется в: USB Human-Interface Controller, USB Data-Acquisition System, USB Bootloader and Firmware Recovery AT90USB64-16AU Memory-reduced same-family controller for smaller firmware Используется в: Industrial USB Interface Controller AT90USB1287-16AU Same-package USB microcontroller alternative Используется в: Communications and Sensor Hub AT90USB64-AUR Same-family controller for smaller firmware footprints Используется в: Custom USB Embedded Peripheral
What is the AT90USB1286-AUR?
The AT90USB1286-AUR is a 16MHz 8-bit AVR RISC microcontroller with 128KB of flash memory, 8KB SRAM, 4KB EEPROM, and an integrated USB 2.0 device controller. According to the manufacturer product page, the device also provides 48 general-purpose I/O lines, 10-bit ADC conversion, four timer/counters, USART, and a two-wire serial interface in a 64-pin TQFP package.
What are the key specifications of AT90USB1286-AUR?
The AT90USB1286-AUR combines a 16MHz AVR core with 128KB ISP flash, 8KB SRAM, 4KB EEPROM, and 48 I/O lines. The manufacturer product page identifies eight 10-bit ADC channels, four timer/counters with compare and PWM functions, USB 2.0 low- and full-speed device operation, one USART, and one byte-oriented two-wire interface. Its 64-pin TQFP package provides 14mm by 14mm board footprint.
Where can I download the AT90USB1286-AUR datasheet PDF?
The AT90USB1286-AUR datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/7593S.pdf. The manufacturer document describes the 8-bit AVR RISC architecture, 128KB read-while-write flash, 4KB EEPROM, 8KB SRAM, 48 I/O lines, USB device connectivity, ADC, timers, and the serial interfaces. Use this document for authoritative pin assignments and electrical characteristics.
What is the AT90USB1286-AUR pinout and package?
The AT90USB1286-AUR uses a 64-pin TQFP package measuring 14mm by 14mm. The 48 available general-purpose I/O lines are distributed alongside power, ground, clock, reset, programming, analog, timer, and USB-related functions. Use the pin-description table in the Microchip datasheet when assigning every trace, and confirm the exposed package orientation and pin-1 marker during PCB layout.
Does the AT90USB1286-AUR support USB full speed?
Yes, the AT90USB1286-AUR supports USB 2.0 low-speed and full-speed device operation. The manufacturer product page identifies the USB interface as an integrated feature of the device rather than an external controller. This makes the MCU appropriate for direct USB-connected peripherals, although the final bus design must still meet USB impedance, routing, protection, and signal-integrity requirements.
How much flash memory does the AT90USB1286-AUR have?
The AT90USB1286-AUR contains 128KB of in-system programmable flash memory. The manufacturer datasheet states that the memory supports read-while-write operation, optional boot code with independent lock bits, and 100,000 write/erase cycles. The additional boot section and factory-programmed USB bootloader make the device suitable for production programming, recovery, and dual-bank-style firmware workflows.
What can replace the AT90USB1286-AUR?
The closest same-family drop-in choices include the AT90USB1287-AUR and AT90USB64-AUR when their memory and USB-boot behavior match the design requirements. A true replacement should retain the 64-pin TQFP footprint, pin functions, 16MHz operating class, 10-bit ADC resources, and USB device requirements. Firmware and boot-loader behavior must also be reviewed before approving a substitution.
Is AT90USB1287-AUR pin-compatible with AT90USB1286-AUR?
The AT90USB1287-AUR belongs to the same AT90USB64/128 family and uses the same 64-pin TQFP format, making it the closest verified same-package alternative. The meaningful distinction is USB bootloader behavior rather than package geometry. Because both devices support 128KB flash, 4KB EEPROM, 8KB SRAM, 48 I/O lines, and USB 2.0 device operation, they are close in core parameters, but production firmware must support the selected device.
When should I choose AT90USB1286-AUR instead of AT90USB1287-AUR?
Choose the AT90USB1286-AUR when the design specifically targets its USB bootloader and device configuration, while the AT90USB1287-AUR offers a closely related same-package alternative with different USB bootloader behavior. Both provide 128KB flash, 4KB EEPROM, 8KB SRAM, 48 I/O lines, and 16MHz operation. Select the device whose documented boot behavior and supported programming workflow match the product firmware.
What is the difference between AT90USB1286-AUR and AT90USB64-AUR?
The principal documented difference is nonvolatile memory capacity: the AT90USB1286-AUR provides 128KB of flash and 4KB of EEPROM, whereas the AT90USB64-AUR provides 64KB of flash and 2KB of EEPROM. Both retain 8KB SRAM, 48 I/O lines, four timer/counters, and USB connectivity. The AT90USB1286-AUR is preferable when firmware, descriptors, or boot code require the larger memory budget.
Is AT90USB1286-AUR suitable for a USB keyboard or Teensy-style controller?
The AT90USB1286-AUR is suitable for USB human-interface and embedded-control designs because it integrates USB 2.0 device operation, 48 I/O lines, 16 timers for scanning, and 128KB of flash for firmware. It has also been associated with Teensy 2.0++-style designs. A new PCB still requires correct USB routing, boot programming, firmware configuration, and keyboard or peripheral testing.
How do I design the USB layout for AT90USB1286-AUR?
Route D+ and D- as a short, length-matched pair on the same PCB layer, with the USB connector and protection components positioned close to the board edge. Keep the USB differential pair away from noisy clocks, switching regulators, and high-current paths. Follow the Microchip datasheet for the exact USB controller implementation and pin assignments, because transceiver topology and external component requirements are board-level design decisions.
How much current does the AT90USB1286-AUR consume?
The exact operating, sleep, and USB-mode current limits should be taken from the Microchip AT90USB1286 datasheet because they depend on clock mode, active peripherals, USB state, and supply voltage. The device is described by the manufacturer as a low-power microcontroller, but that description should not be treated as a substitute for the specific current-consumption table when sizing a USB-powered product.
Where can I buy AT90USB1286-AUR and check its price and lead time?
Use the Request a Quote form on this page to request AT90USB1286-AUR pricing, current stock, quantity availability, and lead time. A verified product listing was observed for the exact 64-pin TQFP ordering code, but pricing and inventory can change by quantity and date. The quote form is the appropriate channel for a current commercial commitment and production schedule.
Is AT90USB1286-AUR currently active?
The AT90USB1286 remains listed as an active Microchip product family on the manufacturer website, while the exact AT90USB1286-AUR ordering code is also represented by current distributor and component listings. For lifecycle assurance, request the latest ordering information and change-control documentation through the Request a Quote form when starting a production program.

Справочные инженерные данные для AT90USB1286-AUR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AT90USB1286-AUR when a design needs 128KB of flash, 4KB of EEPROM, 8KB SRAM, 48 I/O lines, and integrated USB 2.0 device connectivity in a 64-pin TQFP. Select AT90USB1287-AUR when its documented USB bootloader behavior is preferable, since its core memory and package resources closely match the target. AT90USB1287-16AU offers another related ordering option, but clock suffix and bootloader configuration must be checked against the required design. Use AT90USB64-AUR or AT90USB64-16AU only when 64KB flash and 2KB EEPROM are sufficient; both halve the target’s flash and EEPROM capacity. AT90USB1286-AU is the closest electrically equivalent ordering option, subject to confirmation of temperature grade, packing, and purchasing suffix requirements. In every case, validate pin functions, USB routing, bootloader behavior, and firmware support before releasing a production PCB.

Сравнение с аналогами

Параметр Этот товар AT90USB1287-AUR AT90USB1287-16AU AT90USB64-AUR AT90USB64-16AU AT90USB1286-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-pin TQFP 64-pin TQFP - same 64-pin TQFP - same 64-pin TQFP - same 64-pin TQFP - same 64-pin TQFP - same
Flash Memory 128KB 128KB 128KB 64KB 64KB 128KB
EEPROM Memory 4KB 4KB 4KB 2KB 2KB 4KB
SRAM 8KB 8KB 8KB 8KB 8KB 8KB
General-Purpose I/O Lines 48 48 48 48 48 48
ADC 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit
Clock Frequency 16MHz 16MHz 16MHz 16MHz 16MHz 16MHz
USB Capability USB 2.0 low-speed and full-speed device USB 2.0 low-speed and full-speed device USB 2.0 low-speed and full-speed device USB 2.0 low-speed and full-speed device USB 2.0 low-speed and full-speed device USB 2.0 low-speed and full-speed device

Ключевые отличия

  • Twice the flash capacity of the AT90USB64 alternatives (против AT90USB64-AUR)
  • Twice the EEPROM capacity of the AT90USB64 alternatives (против AT90USB64-16AU)
  • Substantially greater nonvolatile memory than AT90USB64 alternatives (против AT90USB1287-AUR)
  • Higher memory density without changing the 64-pin TQFP footprint (против AT90USB64-AUR)

Заметки по проектированию

Route the USB differential pair as a short, tightly coupled pair on a continuous reference plane. Place USB connector and protection components near the board edge, avoid vias and stubs where practical, and keep switching-node paths and high-current return paths away from D+ and D-. Confirm the exact transceiver connections and impedance target using the manufacturer schematic and USB implementation guidance before release.

The 64-pin TQFP has fine-pitch leads on all four sides, so plan escape routing before fixing the PCB footprint. Keep programming, reset, clock, and USB traces accessible, maintain consistent clearances between adjacent nets, and use vias sparingly around exposed fanout areas. A manufacturer land pattern and drill table should be used directly rather than reconstructing dimensions from a generic TQFP template.

Do not assume that every AT90USB family member is firmware-identical. USB bootloader behavior differs among related devices, and the AT90USB64 variants provide 64KB flash and 2KB EEPROM rather than the target device’s 128KB flash and 4KB EEPROM. Review bootloader entry, fuse settings, USB descriptors, device identification, and firmware build targets before substituting a related ordering code.

Place local decoupling capacitors adjacent to the device’s supply pins and provide the clock and reset circuitry shown in the manufacturer reference design. USB bus-powered systems must also account for inrush, cable transients, and the voltage budget across protection devices and regulators. Confirm operating-current and USB-suspend limits from the electrical-characteristics tables rather than relying on the low-power feature description.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

at90usb1286 datasheet at90usb1286 tqfp at90usb1286 arduino at90usb1286 board at90usb1286 teensy 2.0 ++ atmel at90usb1286 teensy at90usb1286 AT90USB1286-AUR datasheet pdf AT90USB1286-AUR pinout AT90USB1286-AUR equivalent AT90USB1286-AUR replacement AT90USB1286-AUR vs AT90USB1287-AUR AT90USB1286-AUR USB 2.0 AT90USB1286-AUR application circuit AT90USB1286-AUR price

Связанные компоненты & термины

Microchip Technology AT90USB1286 AT90USB1286-AUR AT90USB1287-AUR AT90USB1287-16AU AT90USB64-AUR AT90USB64-16AU AT90USB1286-AU 8-bit microcontroller AVR enhanced RISC architecture USB 2.0 device controller USB full-speed USB low-speed USB bootloader In-system programming Read-while-write flash 10-bit ADC USART Two-wire serial interface Timer/counter with PWM 64-pin TQFP TQFP package family Surface-mount package USB human-interface device Embedded data-acquisition system
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ