ATF16LV8C-15XC - 15ns 8-Macrocell EEPLD | Microchip
MPN: ATF16LV8C-15XC ✓ সক্রিয়ATF16LV8C-15XC সারাংশ
An EEPLD is a form of programmable logic device that stores its configuration in nonvolatile electrically erasable CMOS memory. Within the broader semiconductor hierarchy, the ATF16LV8C belongs to the PLD and logic-IC families, replacing a collection of gates, flip-flops, or combinational logic with one configurable component. Its architecture provides a practical way to consolidate fixed Boolean functions into a small, surface-mount package without permanently modifying the PCB.
The device supports operating speeds down to 10 ns across the ATF16LV8C family, while the ATF16LV8C-15XC provides a 15 ns speed grade. Eight outputs are each allocated eight product terms, and three operating modes are selected automatically by software. A pin-controlled power-down option limits current to 5 uA maximum, while typical standby current is 100 nA. These characteristics support both active logic and low-duty-cycle embedded systems.
The ATF16LV8C architecture incorporates the generic 16R8 architecture and can directly replace the 16R8 family and most 20-pin combinatorial PLDs. Its three configurable modes allow designers to realize more complex logic functions than a simple combinational device. The 20-pin TSSOP package also supports compact PCB layouts while preserving external programmability and straightforward board-level replacement.
Typical uses include industrial control and interface logic, peripheral decoding, address decoding, data-routing networks, state-machine control, and compact embedded glue logic. The 8-macrocell capacity is particularly useful where several Boolean subfunctions must be consolidated but a larger FPGA or microcontroller is unnecessary. The TSSOP footprint can also simplify upgrades compared with larger PLD packages.
Design around the specified operating voltage, input levels, output drive, and timing limits. Place programming and control signals so their levels remain valid during configuration, and use the manufacturer pin-description table when assigning PCB tracks. Account for input setup, hold, clock, and output-enable requirements when defining system timing; a nominal 15 ns grade alone does not guarantee the complete path delay.
This product page combines the manufacturer device characteristics with practical logic-design guidance, package and pin information, verified comparison alternatives, and selection criteria for engineers deciding between a small EEPLD, a fixed PAL, or a larger programmable-logic solution.
এর জন্য ড্রপ-ইন বিকল্প ATF16LV8C-15XC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ATF16LV8C-10XC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ATF16LV8C-15XC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | EECMOS electrically erasable programmable logic device |
| Architecture | 16V8 with 8 macrocells |
| Speed Grade | 15 ns |
| Family Maximum Pin-to-Pin Delay | 10 ns |
| Macrocells | 8 |
| Product Terms per Output | 8 |
| Operating Modes | 3 software-configured modes |
| সাপ্লাই ভোল্টেজ | 3 V |
| Pin-Controlled Power-Down Current | 5 uA maximum |
| Typical Standby Current | 100 nA |
| Input Compatibility | CMOS and TTL |
| Output Compatibility | CMOS and TTL |
| Equivalent Logic Capacity | 250 gates |
| প্যাকেজ | 20-pin TSSOP |
| মাউন্টিং টাইপ | Surface mount |
| Programmable Technology | Electrically erasable flash memory |
| Operating Temperature Grade | Industrial temperature |
ATF16LV8C-15XC পিন কনফিগারেশন
| পিন 1 | PD1 — Program data input or configuration pin |
| পিন 2 | PD2 — Program data input or configuration pin |
| পিন 3 | I0 — Logic input |
| পিন 4 | I1 — Logic input |
| পিন 5 | I2 — Logic input |
| পিন 6 | I3 — Logic input |
| পিন 7 | I4 — Logic input |
| পিন 8 | GND — Ground |
| পিন 9 | O4 — Logic output |
| পিন 10 | O3 — Logic output |
| পিন 11 | O2 — Logic output |
| পিন 12 | O1 — Logic output |
| পিন 13 | O0 — Logic output |
| পিন 14 | I5 — Logic input |
| পিন 15 | I6 — Logic input |
| পিন 16 | I7 — Logic input |
| পিন 17 | CLK — Clock input |
| পিন 18 | OE — Output enable input |
| পিন 19 | VCC — Positive power supply |
| পিন 20 | PD3 — Program data input or configuration pin |
সাধারণ ব্যবহার
ATF16LV8C-15XC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Peripheral and Address Decoding, Embedded Data Routing, Interface Signal Conditioning, Low-Power Instrument Logic, Legacy System Consolidation.
Industrial Control Logic
The ATF16LV8C-15XC fits industrial control designs that need several compact Boolean functions without a larger FPGA. Its eight macrocells can consolidate interlocks, alarm conditions, mode decoding, and actuator-command logic, while the 15 ns grade provides a defined timing target for control paths. The 3 V operating supply and 20-pin TSSOP package simplify placement in compact controller boards. The pin-controlled power-down option, specified at 5 uA maximum, is useful when the controller must reduce current during inactive periods. Confirm input thresholds, output drive, and timing against the actual sensor and actuator interfaces before releasing a production design.
সুপারিশকৃত
Peripheral and Address Decoding
ATF16LV8C-15XC is appropriate for decoding peripheral addresses, enabling external functions, and combining multiple digital control signals in a small embedded system. Eight outputs with eight product terms each provide enough logic density for several decode and qualification stages. Its CMOS- and TTL-compatible interfaces support common digital signaling environments, while the 20-pin TSSOP package preserves board space. Unlike a hardwired PAL, the electrically erasable flash configuration permits design updates without replacing the device. Validate address overlap, decode propagation delay, and output-enable behavior in the final system timing because the 15 ns grade describes device speed rather than the complete board path.
সুপারিশকৃত
Embedded Data Routing
The ATF16LV8C-15XC can implement conditional data routing, muxing, and signal qualification where a microcontroller would otherwise devote pins and firmware to repetitive logic. Eight programmable macrocells allow related Boolean expressions to share the same device, reducing component count and keeping routing decisions local to the board. The device's three software-configured operating modes support both combinational and registered implementations when the application requires state handling. Its typical 100 nA standby current is beneficial in intermittently active equipment. For high-speed data paths, calculate setup and hold margins against the 15 ns speed grade and avoid treating the nominal delay as a substitute for a complete timing analysis.
সুপারিশকৃত
Interface Signal Conditioning
ATF16LV8C-15XC is useful for conditioning and translating control relationships between subsystems, including polarity correction, pulse qualification, interlock logic, and synchronized enable generation. Its eight macrocells make it more flexible than a simple dual comparator or a few discrete gates. CMOS- and TTL-compatible inputs and outputs simplify integration with mixed legacy and modern logic, subject to the manufacturer's voltage and drive limits. Place the device close to the controlled interface when propagation-delay symmetry matters, and provide clean power and ground connections. The 20-pin TSSOP footprint supports compact reworkable boards, while the 15 ns grade is appropriate for many control-rate rather than high-frequency data-rate interfaces.
সুপারিশকৃত
Low-Power Instrument Logic
The ATF16LV8C-15XC suits battery-powered instruments that require local logic for mode selection, measurement gating, status encoding, or alarm generation. Its pin-controlled power-down current of 5 uA maximum and typical standby current of 100 nA help reduce quiescent consumption when the instrument is inactive. The device remains programmable in electrically erasable flash memory, allowing configuration updates without adding a separate programming mechanism to the logic section. Because external pull resistors, input leakage, and attached loads can dominate standby consumption, include them in the complete power budget. Use the manufacturer operating-temperature and supply specifications to confirm suitability for the instrument environment.
সুপারিশকৃত
Legacy System Consolidation
ATF16LV8C-15XC can consolidate several PAL-oriented Boolean functions into one reconfigurable component, making it useful when modernizing a board built around 20-pin combinational PLDs. The manufacturer states that the architecture incorporates a superset of the generic 16R8 architecture and supports direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Its three operating modes allow more complex functions than a basic combinational arrangement. For an existing design, verify footprint, pin functions, power-up behavior, programming file compatibility, and output timing rather than assuming all PAL devices are interchangeable. The 20-pin TSSOP package also offers a route to reduce package size during consolidation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATF16LV8C-15XC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ATF16LV8C-10XC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-pin TSSOP | 20-pin TSSOP - same package |
| Device Type | EECMOS EEPLD | EECMOS EEPLD |
| Speed Grade | 15 ns | 10 ns |
| Macrocells | 8 | 8 |
| Product Terms per Output | 8 | 8 |
| Programmable Technology | Electrically erasable flash memory | Electrically erasable flash memory |
| Pin-Controlled Power-Down Current | 5 uA maximum | 5 uA maximum |
| Typical Standby Current | 100 nA | 100 nA |
| Input and Output Compatibility | CMOS and TTL compatible | CMOS and TTL compatible |
| Operating Modes | 3 software-configured modes | 3 software-configured modes |
| Equivalent Logic Capacity | 250 gates | 250 gates |
মূল পার্থক্যসমূহ
- Directly consolidates legacy combinational PLD functions (বনামATF16V8B-15PC)
- Matched architecture and footprint with a faster timing option (বনামATF16LV8C-10XC)
- Low-power operation suits intermittent systems (বনামATF16LV8C-10XC)
ডিজাইন নোট
Do not treat a nominal 15 ns speed grade as the complete external timing budget. Add input setup and hold requirements, output delay, interconnect loading, clock uncertainty, and the required receiver margin. The ATF16LV8C-10XC is the same-package 10 ns option when the design needs additional timing margin, but its faster transition behavior should still be checked against downstream load and board parasitics.
Route the eight logic inputs, eight outputs, clock, output-enable, power, ground, and programming pins according to the manufacturer pin-description table. Keep the clock and output-enable paths short when they participate in synchronous control, and provide a low-impedance ground plane connection. Confirm that programming access remains practical in the assembled PCB layout before committing the TSSOP footprint to a compact production design.
Decouple the 3 V supply locally with the capacitance and placement recommended by the manufacturer, and route transient current away from sensitive logic inputs. Pin-controlled power-down can reduce active-system consumption, with 5 uA specified as the maximum power-down current and 100 nA as typical standby current. External pull networks and attached output loads can exceed the device current, so include them in the complete power-budget calculation.
কমপ্লায়েন্স তথ্য
The device is identified as an industrial-temperature product, but definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations require current manufacturer documentation. The AEC-Q100 field uses unknown because the available device summary does not establish automotive qualification.