Microchip Technology

ATF16LV8C-15XC - 15ns 8-Macrocell EEPLD | Microchip

MPN: ATF16LV8C-15XC ✓ Aktif
3 V Vdss 5 uA maximum Id 20-pin TSSOP Package 15 ns Speed
MOQ: 1 |

ATF16LV8C-15XC Ringkasan

The Microchip ATF16LV8C-15XC is a 15 ns EECMOS electrically erasable programmable logic device with eight macrocells, eight product terms per output, and a 20-pin TSSOP package. It operates from a 3 V supply and provides CMOS- and TTL-compatible inputs and outputs, making it suitable for compact control, interface, and signal-routing designs that require reconfigurable logic.

An EEPLD is a form of programmable logic device that stores its configuration in nonvolatile electrically erasable CMOS memory. Within the broader semiconductor hierarchy, the ATF16LV8C belongs to the PLD and logic-IC families, replacing a collection of gates, flip-flops, or combinational logic with one configurable component. Its architecture provides a practical way to consolidate fixed Boolean functions into a small, surface-mount package without permanently modifying the PCB.

The device supports operating speeds down to 10 ns across the ATF16LV8C family, while the ATF16LV8C-15XC provides a 15 ns speed grade. Eight outputs are each allocated eight product terms, and three operating modes are selected automatically by software. A pin-controlled power-down option limits current to 5 uA maximum, while typical standby current is 100 nA. These characteristics support both active logic and low-duty-cycle embedded systems.

The ATF16LV8C architecture incorporates the generic 16R8 architecture and can directly replace the 16R8 family and most 20-pin combinatorial PLDs. Its three configurable modes allow designers to realize more complex logic functions than a simple combinational device. The 20-pin TSSOP package also supports compact PCB layouts while preserving external programmability and straightforward board-level replacement.

Typical uses include industrial control and interface logic, peripheral decoding, address decoding, data-routing networks, state-machine control, and compact embedded glue logic. The 8-macrocell capacity is particularly useful where several Boolean subfunctions must be consolidated but a larger FPGA or microcontroller is unnecessary. The TSSOP footprint can also simplify upgrades compared with larger PLD packages.

Design around the specified operating voltage, input levels, output drive, and timing limits. Place programming and control signals so their levels remain valid during configuration, and use the manufacturer pin-description table when assigning PCB tracks. Account for input setup, hold, clock, and output-enable requirements when defining system timing; a nominal 15 ns grade alone does not guarantee the complete path delay.

This product page combines the manufacturer device characteristics with practical logic-design guidance, package and pin information, verified comparison alternatives, and selection criteria for engineers deciding between a small EEPLD, a fixed PAL, or a larger programmable-logic solution.

Alternatif penggantian untuk ATF16LV8C-15XC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

ATF16LV8C-10XC

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 20-pin TSSOP
16V8 electrically erasable CMOS simple programmable logic device · EEPLD with EECMOS architecture · Electrically erasable flash memory · 8 macrocells · 8 outputs · 8 product terms · 10 ns · 250 gates

Kontak untuk harga

Lihat Datasheet →

ATF16LV8C-15XC Rating Maksimal & Karakteristik Listrik

Device Type EECMOS electrically erasable programmable logic device
Architecture 16V8 with 8 macrocells
Speed Grade 15 ns
Family Maximum Pin-to-Pin Delay 10 ns
Macrocells 8
Product Terms per Output 8
Operating Modes 3 software-configured modes
Tegangan Pemuat 3 V
Pin-Controlled Power-Down Current 5 uA maximum
Typical Standby Current 100 nA
Input Compatibility CMOS and TTL
Output Compatibility CMOS and TTL
Equivalent Logic Capacity 250 gates
Paket 20-pin TSSOP
Tipe Mounting Surface mount
Programmable Technology Electrically erasable flash memory
Operating Temperature Grade Industrial temperature

Konfigurasi Pin ATF16LV8C-15XC

TSSOP-20 Package Pinout Diagram TSSOP-20 4.4x6.5mm, P0.65mm, JEDEC MO-153. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 TSSOP-20
Pin produk 1 PD1 — Program data input or configuration pin
Pin produk 2 PD2 — Program data input or configuration pin
Pin produk 3 I0 — Logic input
Pin produk 4 I1 — Logic input
Pin produk 5 I2 — Logic input
Pin produk 6 I3 — Logic input
Pin produk 7 I4 — Logic input
Pin produk 8 GND — Ground
Pin produk 9 O4 — Logic output
Pin produk 10 O3 — Logic output
Pin produk 11 O2 — Logic output
Pin produk 12 O1 — Logic output
Pin produk 13 O0 — Logic output
Pin produk 14 I5 — Logic input
Pin produk 15 I6 — Logic input
Pin produk 16 I7 — Logic input
Pin produk 17 CLK — Clock input
Pin produk 18 OE — Output enable input
Pin produk 19 VCC — Positive power supply
Pin produk 20 PD3 — Program data input or configuration pin

Aplikasi Umum

ATF16LV8C-15XC cocok untuk 6 aplikasis: Industrial Control Logic, Peripheral and Address Decoding, Embedded Data Routing, Interface Signal Conditioning, Low-Power Instrument Logic, Legacy System Consolidation.

🏭

Industrial Control Logic

The ATF16LV8C-15XC fits industrial control designs that need several compact Boolean functions without a larger FPGA. Its eight macrocells can consolidate interlocks, alarm conditions, mode decoding, and actuator-command logic, while the 15 ns grade provides a defined timing target for control paths. The 3 V operating supply and 20-pin TSSOP package simplify placement in compact controller boards. The pin-controlled power-down option, specified at 5 uA maximum, is useful when the controller must reduce current during inactive periods. Confirm input thresholds, output drive, and timing against the actual sensor and actuator interfaces before releasing a production design.

🔧

Peripheral and Address Decoding

ATF16LV8C-15XC is appropriate for decoding peripheral addresses, enabling external functions, and combining multiple digital control signals in a small embedded system. Eight outputs with eight product terms each provide enough logic density for several decode and qualification stages. Its CMOS- and TTL-compatible interfaces support common digital signaling environments, while the 20-pin TSSOP package preserves board space. Unlike a hardwired PAL, the electrically erasable flash configuration permits design updates without replacing the device. Validate address overlap, decode propagation delay, and output-enable behavior in the final system timing because the 15 ns grade describes device speed rather than the complete board path.

🖥️

Embedded Data Routing

The ATF16LV8C-15XC can implement conditional data routing, muxing, and signal qualification where a microcontroller would otherwise devote pins and firmware to repetitive logic. Eight programmable macrocells allow related Boolean expressions to share the same device, reducing component count and keeping routing decisions local to the board. The device's three software-configured operating modes support both combinational and registered implementations when the application requires state handling. Its typical 100 nA standby current is beneficial in intermittently active equipment. For high-speed data paths, calculate setup and hold margins against the 15 ns speed grade and avoid treating the nominal delay as a substitute for a complete timing analysis.

🔌

Interface Signal Conditioning

ATF16LV8C-15XC is useful for conditioning and translating control relationships between subsystems, including polarity correction, pulse qualification, interlock logic, and synchronized enable generation. Its eight macrocells make it more flexible than a simple dual comparator or a few discrete gates. CMOS- and TTL-compatible inputs and outputs simplify integration with mixed legacy and modern logic, subject to the manufacturer's voltage and drive limits. Place the device close to the controlled interface when propagation-delay symmetry matters, and provide clean power and ground connections. The 20-pin TSSOP footprint supports compact reworkable boards, while the 15 ns grade is appropriate for many control-rate rather than high-frequency data-rate interfaces.

🧩

Low-Power Instrument Logic

The ATF16LV8C-15XC suits battery-powered instruments that require local logic for mode selection, measurement gating, status encoding, or alarm generation. Its pin-controlled power-down current of 5 uA maximum and typical standby current of 100 nA help reduce quiescent consumption when the instrument is inactive. The device remains programmable in electrically erasable flash memory, allowing configuration updates without adding a separate programming mechanism to the logic section. Because external pull resistors, input leakage, and attached loads can dominate standby consumption, include them in the complete power budget. Use the manufacturer operating-temperature and supply specifications to confirm suitability for the instrument environment.

🔧

Legacy System Consolidation

ATF16LV8C-15XC can consolidate several PAL-oriented Boolean functions into one reconfigurable component, making it useful when modernizing a board built around 20-pin combinational PLDs. The manufacturer states that the architecture incorporates a superset of the generic 16R8 architecture and supports direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Its three operating modes allow more complex functions than a basic combinational arrangement. For an existing design, verify footprint, pin functions, power-up behavior, programming file compatibility, and output timing rather than assuming all PAL devices are interchangeable. The 20-pin TSSOP package also offers a route to reduce package size during consolidation.

What is the ATF16LV8C-15XC?
The ATF16LV8C-15XC is a 15 ns EECMOS electrically erasable programmable logic device from Microchip Technology. It contains eight macrocells, assigns eight product terms to each output, and is packaged in a 20-pin TSSOP. According to the manufacturer datasheet, the device is based on electrically erasable flash-memory technology and can implement combinational, registered, or mixed logic functions.
What are the key specifications of ATF16LV8C-15XC that engineers should know?
The ATF16LV8C-15XC is a 3 V, 15 ns programmable logic device with eight macrocells in a 20-pin TSSOP package. The manufacturer datasheet identifies eight product terms per output, three software-configured operating modes, CMOS- and TTL-compatible inputs and outputs, a 5 uA maximum pin-controlled power-down current, and typical standby current of 100 nA.
Where can I download the ATF16LV8C-15XC datasheet PDF?
The official ATF16LV8C-15XC datasheet is available from Microchip Technology at the manufacturer PDF link on this page. It documents the electrical characteristics, programmable architecture, operating modes, timing, power behavior, and package information. Use the manufacturer pin-description table when assigning signal names because the TSSOP footprint includes dedicated programming and control functions.
Where can I find the ATF16LV8C-15XC pinout?
The ATF16LV8C-15XC pinout is shown in the manufacturer datasheet and reproduced on this product page for the 20-pin TSSOP configuration. Use the numbered package diagram to identify the input, output, clock, output-enable, programming, power, ground, and power-down pins. Follow counter-clockwise numbering from pin 1 and verify every PCB net against the manufacturer pin-description table.
What can replace the ATF16LV8C-15XC?
The ATF16LV8C-10XC is the closest documented same-package replacement because it retains the 20-pin TSSOP footprint and ATF16LV8C architecture while changing the speed grade from 15 ns to 10 ns. It is a faster drop-in option when system timing supports it. Compatibility of the programmed JEDEC fuse pattern, supply requirements, timing constraints, and operating temperature grade must be confirmed before substitution.
Is ATF16LV8C-15XC pin compatible with ATF16LV8C-10XC?
ATF16LV8C-10XC uses the same 20-pin TSSOP footprint and ATF16LV8C macrocell architecture as the ATF16LV8C-15XC. Its principal difference is the faster 10 ns speed grade versus 15 ns, a 33% reduction in the stated nominal delay. Both use electrically erasable flash-memory configuration, so the pin arrangement is compatible while timing margin improves with the faster grade.
When should I choose ATF16LV8C-15XC over ATF16LV8C-10XC?
Choose the ATF16LV8C-15XC when the 15 ns grade is appropriate for the design and you want to avoid paying for unnecessary timing margin. Choose the ATF16LV8C-10XC when the external path must meet a tighter timing budget. Both devices provide the same eight-macrocell ATF16LV8C architecture in a 20-pin TSSOP package, so timing rather than package compatibility is the principal distinction.
Is ATF16LV8C-15XC suitable for low-power embedded control?
ATF16LV8C-15XC is suitable for low-duty-cycle embedded control when its configuration can remain in a low-power state between active operations. The manufacturer datasheet specifies pin-controlled power-down current up to 5 uA and typical standby current of 100 nA. These figures support battery-conscious designs, although total system consumption also depends on external pull networks, programming behavior, and the controlled loads attached to the outputs.
How many logic functions can ATF16LV8C-15XC implement?
ATF16LV8C-15XC provides eight macrocells, with eight product terms allocated to each of eight outputs. The manufacturer describes three software-selected operating modes that allow complex Boolean functions to be realized. The device is positioned as a 250-gate equivalent logic component, making it most appropriate for consolidating several small control or decoding functions rather than implementing a large processor-level architecture.
What is the difference between ATF16V8B-15PC and ATF16LV8C-15XC?
The principal documented distinction is the implementation technology and package family: ATF16V8B-15PC belongs to the ATF16V8B family, while ATF16LV8C-15XC uses EECMOS electrically erasable flash-memory technology in a 20-pin TSSOP. The ATF16V8C also offers configurable operating modes and pin-controlled low-power operation. Package and programming-pattern compatibility must be verified before treating the devices as interchangeable.
Where can I buy ATF16LV8C-15XC online?
Use the Request a Quote form on this page to request ATF16LV8C-15XC availability, current commercial terms, and the required quantity. The form is the appropriate route for checking stock, lead time, and order handling without relying on a static price that may change. Specify the 20-pin TSSOP package and the exact ATF16LV8C-15XC suffix when requesting the quotation.
What is the price of ATF16LV8C-15XC?
Submit the ATF16LV8C-15XC requirement through the Request a Quote form on this page for the current commercial price and volume breaks. Quote requests should state the desired quantity, target date, and whether reels, cut tape, or another permitted shipping format is required. The pricing form provides the most current answer because component pricing and availability can change with market conditions.
What is the lead time for ATF16LV8C-15XC?
The current lead time for ATF16LV8C-15XC should be requested through the Request a Quote form on this page. Include your required quantity, production schedule, and approved shipping method so the supplier can confirm the appropriate allocation and delivery plan. For production designs, request written schedule confirmation rather than relying on a generic inventory estimate.
Is ATF16LV8C-15XC in stock?
Stock for ATF16LV8C-15XC should be confirmed through the Request a Quote form on this page. Include the required quantity, package preference, and target date to obtain a current availability response. For scheduled production, request confirmation that the quoted allocation can meet your component-consignment or assembly timeline.
Does ATF16LV8C-15XC comply with RoHS and AEC-Q100?
The ATF16LV8C-15XC compliance status must be confirmed from the current manufacturer product documentation or a material declaration before use in a regulated production design. The manufacturer documentation supports the part's industrial-temperature identification, but a definitive RoHS, REACH, lead-free, or automotive-qualification statement is not established by the device summary alone. Request the applicable compliance documents before procurement.

Data referensi engineering untuk ATF16LV8C-15XC — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATF16LV8C-15XC when an application needs a compact, nonvolatile, reconfigurable logic block with eight macrocells, three configurable operating modes, and a 20-pin TSSOP footprint. It is particularly suitable for control logic, address decoding, peripheral control, and legacy PAL consolidation where a larger programmable-logic device would be unnecessary. Select ATF16LV8C-10XC when the same footprint and architecture are needed but the system requires tighter timing margin; its 10 ns grade is 33% faster than the 15 ns target grade. Consider ATF16V8B-15PC only after verifying package, programming, logic-mode, and timing differences, because it belongs to a different device family. For designs requiring more outputs, deeper logic, or substantially higher complexity, move to a larger PLD or CPLD rather than forcing functions beyond the ATF16LV8C's eight-macrocell capacity.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATF16LV8C-10XC
Brand Microchip Technology Microchip Technology
Package 20-pin TSSOP 20-pin TSSOP - same package
Device Type EECMOS EEPLD EECMOS EEPLD
Speed Grade 15 ns 10 ns
Macrocells 8 8
Product Terms per Output 8 8
Programmable Technology Electrically erasable flash memory Electrically erasable flash memory
Pin-Controlled Power-Down Current 5 uA maximum 5 uA maximum
Typical Standby Current 100 nA 100 nA
Input and Output Compatibility CMOS and TTL compatible CMOS and TTL compatible
Operating Modes 3 software-configured modes 3 software-configured modes
Equivalent Logic Capacity 250 gates 250 gates

Diferensiator Kunci

  • Directly consolidates legacy combinational PLD functions (vsATF16V8B-15PC)
  • Matched architecture and footprint with a faster timing option (vsATF16LV8C-10XC)
  • Low-power operation suits intermittent systems (vsATF16LV8C-10XC)

Catatan Desain

Do not treat a nominal 15 ns speed grade as the complete external timing budget. Add input setup and hold requirements, output delay, interconnect loading, clock uncertainty, and the required receiver margin. The ATF16LV8C-10XC is the same-package 10 ns option when the design needs additional timing margin, but its faster transition behavior should still be checked against downstream load and board parasitics.

Route the eight logic inputs, eight outputs, clock, output-enable, power, ground, and programming pins according to the manufacturer pin-description table. Keep the clock and output-enable paths short when they participate in synchronous control, and provide a low-impedance ground plane connection. Confirm that programming access remains practical in the assembled PCB layout before committing the TSSOP footprint to a compact production design.

Decouple the 3 V supply locally with the capacitance and placement recommended by the manufacturer, and route transient current away from sensitive logic inputs. Pin-controlled power-down can reduce active-system consumption, with 5 uA specified as the maximum power-down current and 100 nA as typical standby current. External pull networks and attached output loads can exceed the device current, so include them in the complete power-budget calculation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The device is identified as an industrial-temperature product, but definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations require current manufacturer documentation. The AEC-Q100 field uses unknown because the available device summary does not establish automotive qualification.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ATF16LV8C-15XC ATF16LV8C-15XC datasheet ATF16LV8C-15XC datasheet pdf ATF16LV8C-15XC pinout ATF16LV8C-15XC equivalent ATF16LV8C-15XC replacement ATF16LV8C-15XC cross reference ATF16LV8C-15XC footprint ATF16LV8C-15XC schematic ATF16LV8C-15XC application circuit ATF16LV8C-15XC vs ATF16LV8C-10XC ATF16LV8C-15XC price ATF16LV8C-15XC stock Microchip ATF16LV8C-15XC ATF16LV8C 20-TSSOP pinout

Komponen dan Istilah Terkait

Microchip Technology ATF16LV8C-15XC ATF16LV8C-10XC ATF16LV8C-15JC ATF16V8B-15PC EECMOS electrically erasable programmable logic device EEPLD programmable logic device PLD logic IC semiconductor electrically erasable flash memory CMOS TTL 20-pin TSSOP TSSOP family surface mount SMD 8 macrocells 15 ns pin-to-pin delay 10 ns pin-to-pin delay 5 uA power-down current 100 nA standby current address decoding
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ