ATF22LV10C-15XC - 15ns CMOS SPLD | Microchip Technology
MPN: ATF22LV10C-15XC ✓ সক্রিয়ATF22LV10C-15XC সারাংশ
A simple programmable logic device is a PLD that combines a programmable AND-array, configurable product-term logic, and dedicated I/O resources into a compact logic implementation. Within the broader semiconductor hierarchy, the ATF22LV10C belongs to the SPLD family, which sits below larger CPLD and FPGA devices. It is intended for consolidation of several gates, decode functions, counters, state machines, and control logic where a small fixed-capacity device is more appropriate than a general-purpose microcontroller or FPGA.
The ATF22LV10C family supports operation across a 3.0 V to 5.5 V range for industrial and commercial temperature grades. The -15 suffix identifies the 15 ns performance class, while the -XC ordering code denotes the commercial-temperature TSSOP configuration. Each macrocell uses a variable product-term architecture, and each output is assigned from 8 to 16 product terms, allowing moderately complex Boolean functions to be realized in one device.
Electrically erasable flash memory permits the programmed configuration to be changed without removing the package from the circuit. The architecture combines that reprogrammability with a compact 24-pin TSSOP footprint and low-power shutdown control. This makes the device useful for prototype stabilization, production configuration control, board-level glue logic, and compact control systems that require deterministic combinational or registered logic without the overhead of a larger programmable device.
Typical uses include interface decoding, industrial control panels, test fixtures, programmable logic controllers, peripheral glue logic, and compact state-machine implementations. In a control panel, the ATF22LV10C-15XC could implement switch decoding, status encoding, and discrete sequencing functions while retaining flash-based field programmability. In a test fixture, it can combine multiple address-decoding and control functions into one low-power package.
PCB design should account for the device’s 24-pin TSSOP geometry, programming interface requirements, and decoupling needs. Place the device close to the signals it serves to minimize trace lengths and routing complexity. When power management is important, verify that the power-down input sequencing and external logic do not create an uncontrolled state during startup or reset.
This product page combines the manufacturer’s device specifications with application-oriented design guidance and a pin-compatible alternative table. It is intended to help engineers evaluate logic density, propagation-delay class, package compatibility, reprogrammability, and low-power operation before integrating the ATF22LV10C-15XC into a compact embedded design.
এর জন্য ড্রপ-ইন বিকল্প ATF22LV10C-15XC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ATF22LV10C-10XC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22LV10C-20XC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22LV10C-25XC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22LV10C-15XQ
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22LV10C-15XC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Simple Programmable Logic Device (SPLD) |
| Programmable Technology | Electrically Erasable Flash Memory |
| Macrocells | 10 macrocells |
| Equivalent Logic Gates | 500 gates |
| Propagation Delay Grade | 15 ns |
| Nominal Supply Voltage | 3.3 V |
| Supported Supply Voltage Range | 3.0 V to 5.5 V |
| Standby Current | 10 µA typical |
| Product Terms per Output | 8 to 16 product terms |
| প্যাকেজ | 24-pin TSSOP |
| Terminal Count | 24 terminals |
| মাউন্টিং টাইপ | Surface Mount |
| Package Shape | Rectangular |
| Temperature Grade | Commercial temperature grade |
| Product Family Speed Coverage | Down to 25 ns |
| Power-Down Control | User-controlled |
| Logic Family | CMOS |
ATF22LV10C-15XC rectangular পিন কনফিগারেশন গাইড
ATF22LV10C-15XC (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATF22LV10C-15XC.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATF22LV10C-15XC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Panel Logic, Programmable Test Fixture, Interface Decode and Glue Logic, Compact State Machine Control, Low-Power Peripheral Power Control, Legacy System Logic Consolidation.
Industrial Control Panel Logic
The ATF22LV10C-15XC is well suited to consolidating switch decoding, status encoding, and sequencing logic in an industrial control panel. Its 10 macrocells and 500-gate capacity can implement several Boolean and decode functions in a single 24-pin TSSOP package, reducing the number of separate fixed-function logic devices. The 15 ns speed grade provides a defined performance class for ordinary control paths, while 3.0 V to 5.5 V operation accommodates 3.3 V system rails. Flash-based configuration permits late-stage logic changes without replacing the package. Ensure that the selected commercial or industrial temperature grade matches the panel environment.
সুপারিশকৃত
Programmable Test Fixture
A programmable test fixture can use the ATF22LV10C-15XC to combine address decoding, indicator control, and fixture-specific logic without occupying a large FPGA. The 10-macrocell device provides 500 equivalent gates, with 8 to 16 product terms available per output, enough for moderate Boolean functions and state logic. Its 24-pin TSSOP package simplifies compact board construction, and the 15 ns speed class supports ordinary fixture timing. Electrically erasable flash memory allows fixture behavior to be revised during test development. For longer test sequences, peripheral control, or extensive I/O, consider a microcontroller or larger programmable logic device.
সুপারিশকৃত
Interface Decode and Glue Logic
The ATF22LV10C-15XC can implement address decoding, chip-select generation, signal translation, and peripheral glue logic around a larger controller. Its 10 macrocells provide a practical balance between compactness and dedicated logic density, while the 24-pin TSSOP footprint keeps the implementation close to the controlled interface signals. The 15 ns grade is relevant where moderate propagation delay must be included in an interface budget, and the 3.3 V nominal supply matches many embedded systems. Check every programming and I/O pin against the datasheet, and use the flash-programmed configuration only after validating the logic equations and timing.
সুপারিশকৃত
Compact State Machine Control
The ATF22LV10C-15XC can implement compact finite-state machines, sequence detectors, and mode controllers where the required state count and Boolean complexity fit within 10 macrocells. The variable product-term architecture allows outputs to use 8 to 16 terms, which supports flexible equation development for registered and combinational functions. Its electrically erasable flash configuration makes it useful during control-panel or mechanism prototyping because state logic can be updated without replacing the device. Validate worst-case path delay at the actual 3.0 V to 5.5 V supply condition and include clock, reset, and unused-pin requirements in the design review.
সুপারিশকৃত
Low-Power Peripheral Power Control
The ATF22LV10C-15XC can supervise peripheral enables, isolation signals, and low-power mode transitions in a compact embedded system. Its user-controlled power-down function reduces standby current to 10 µA typical, making the device useful when a logic block must remain available but avoid continuous active power. The 3.0 V to 5.5 V range allows operation from common embedded rails, and the 24-pin TSSOP package supports a small controller board. External sequencing must ensure that power-down requests do not create invalid bus states or unintended output transitions during startup and wake-up.
সুপারিশকৃত
Legacy System Logic Consolidation
The ATF22LV10C-15XC can replace a collection of discrete gates or multiple simple PLDs in a legacy control system, reducing component count and simplifying board inventory. Its 10 macrocells provide 500 equivalent gates, and flash memory allows the logic map to be revised without physically replacing the package during maintenance or production updates. The commercial-temperature -XC ordering code should be used only when environmental exposure remains within its specified rating; an industrial-grade option may be required for harsher installations. Validate legacy voltage levels, pin assignments, and timing before converting an existing board.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATF22LV10C-15XC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ATF22LV10C-10XC | ATF22LV10C-20XC | ATF22LV10C-25XC | ATF22LV10C-15XQ |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP |
| Propagation-Delay Grade | 15 ns | 10 ns | 20 ns | 25 ns | 15 ns |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Equivalent Gate Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Programmable Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory |
| Power-Down Control | User-controlled | User-controlled | User-controlled | User-controlled | User-controlled |
| Product Terms per Output | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms |
মূল পার্থক্যসমূহ
- Balanced speed and compact capacity (বনামATF22LV10C-10XC)
- Commercial-temperature target option (বনামATF22LV10C-15XQ)
- Ten-macrocell flash-programmable architecture (বনামATF22LV10C-25XC)
ডিজাইন নোট
Use the 24-pin TSSOP land pattern from the manufacturer package drawing and preserve the standard pin-1 orientation. Keep the device close to the nets implementing decode and control functions to minimize propagation delay and reduce susceptibility to board-level noise. Place the programming interface away from sensitive signal paths where practical, and check unused pins against the datasheet’s required termination or configuration instructions.
Decouple the 3.3 V supply close to the device and validate operation across the permitted 3.0 V to 5.5 V range. If power-down is used, guarantee that the control signal has a defined state during reset and startup. The family’s 10 µA typical standby current applies to the user-controlled power-down mode; board-level leakage, pull resistors, programmer circuitry, and connected peripherals may increase the total system standby demand.
Do not treat a faster or slower speed suffix as an automatic drop-in qualification. Compare the package, temperature grade, supply voltage, programming method, pin functions, and worst-case timing for every selected ATF22LV10C ordering code. When upgrading from the 15 ns device to a 10 ns version, confirm that the programmed configuration is accepted and verify downstream timing rather than assuming that only the speed rating changed.
কমপ্লায়েন্স তথ্য
Compliance status was not stated in the cited technical or distribution records. AEC-Q100 is not applicable because this is a programmable logic device rather than an automotive-qualified component.