ATF22LV10C-15XC - 15ns CMOS SPLD | Microchip Technology
부품 번호: ATF22LV10C-15XC ✓ 활성ATF22LV10C-15XC 개요
A simple programmable logic device is a PLD that combines a programmable AND-array, configurable product-term logic, and dedicated I/O resources into a compact logic implementation. Within the broader semiconductor hierarchy, the ATF22LV10C belongs to the SPLD family, which sits below larger CPLD and FPGA devices. It is intended for consolidation of several gates, decode functions, counters, state machines, and control logic where a small fixed-capacity device is more appropriate than a general-purpose microcontroller or FPGA.
The ATF22LV10C family supports operation across a 3.0 V to 5.5 V range for industrial and commercial temperature grades. The -15 suffix identifies the 15 ns performance class, while the -XC ordering code denotes the commercial-temperature TSSOP configuration. Each macrocell uses a variable product-term architecture, and each output is assigned from 8 to 16 product terms, allowing moderately complex Boolean functions to be realized in one device.
Electrically erasable flash memory permits the programmed configuration to be changed without removing the package from the circuit. The architecture combines that reprogrammability with a compact 24-pin TSSOP footprint and low-power shutdown control. This makes the device useful for prototype stabilization, production configuration control, board-level glue logic, and compact control systems that require deterministic combinational or registered logic without the overhead of a larger programmable device.
Typical uses include interface decoding, industrial control panels, test fixtures, programmable logic controllers, peripheral glue logic, and compact state-machine implementations. In a control panel, the ATF22LV10C-15XC could implement switch decoding, status encoding, and discrete sequencing functions while retaining flash-based field programmability. In a test fixture, it can combine multiple address-decoding and control functions into one low-power package.
PCB design should account for the device’s 24-pin TSSOP geometry, programming interface requirements, and decoupling needs. Place the device close to the signals it serves to minimize trace lengths and routing complexity. When power management is important, verify that the power-down input sequencing and external logic do not create an uncontrolled state during startup or reset.
This product page combines the manufacturer’s device specifications with application-oriented design guidance and a pin-compatible alternative table. It is intended to help engineers evaluate logic density, propagation-delay class, package compatibility, reprogrammability, and low-power operation before integrating the ATF22LV10C-15XC into a compact embedded design.
드롭인 대체품: ATF22LV10C-15XC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ATF22LV10C-10XC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATF22LV10C-20XC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATF22LV10C-25XC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATF22LV10C-15XQ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATF22LV10C-15XC 최대 정격 & 전기적 특성
| Device Type | Simple Programmable Logic Device (SPLD) |
| Programmable Technology | Electrically Erasable Flash Memory |
| Macrocells | 10 macrocells |
| Equivalent Logic Gates | 500 gates |
| Propagation Delay Grade | 15 ns |
| Nominal Supply Voltage | 3.3 V |
| Supported Supply Voltage Range | 3.0 V to 5.5 V |
| Standby Current | 10 µA typical |
| Product Terms per Output | 8 to 16 product terms |
| 패키지 | 24-pin TSSOP |
| Terminal Count | 24 terminals |
| 실장 유형 | Surface Mount |
| Package Shape | Rectangular |
| Temperature Grade | Commercial temperature grade |
| Product Family Speed Coverage | Down to 25 ns |
| Power-Down Control | User-controlled |
| Logic Family | CMOS |
ATF22LV10C-15XC rectangular 핀 구성 가이드
ATF22LV10C-15XC(rectangular 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATF22LV10C-15XC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATF22LV10C-15XC 적합 용도: 6 애플리케이션s: Industrial Control Panel Logic, Programmable Test Fixture, Interface Decode and Glue Logic, Compact State Machine Control, Low-Power Peripheral Power Control, Legacy System Logic Consolidation.
Industrial Control Panel Logic
The ATF22LV10C-15XC is well suited to consolidating switch decoding, status encoding, and sequencing logic in an industrial control panel. Its 10 macrocells and 500-gate capacity can implement several Boolean and decode functions in a single 24-pin TSSOP package, reducing the number of separate fixed-function logic devices. The 15 ns speed grade provides a defined performance class for ordinary control paths, while 3.0 V to 5.5 V operation accommodates 3.3 V system rails. Flash-based configuration permits late-stage logic changes without replacing the package. Ensure that the selected commercial or industrial temperature grade matches the panel environment.
추천
Programmable Test Fixture
A programmable test fixture can use the ATF22LV10C-15XC to combine address decoding, indicator control, and fixture-specific logic without occupying a large FPGA. The 10-macrocell device provides 500 equivalent gates, with 8 to 16 product terms available per output, enough for moderate Boolean functions and state logic. Its 24-pin TSSOP package simplifies compact board construction, and the 15 ns speed class supports ordinary fixture timing. Electrically erasable flash memory allows fixture behavior to be revised during test development. For longer test sequences, peripheral control, or extensive I/O, consider a microcontroller or larger programmable logic device.
추천
Interface Decode and Glue Logic
The ATF22LV10C-15XC can implement address decoding, chip-select generation, signal translation, and peripheral glue logic around a larger controller. Its 10 macrocells provide a practical balance between compactness and dedicated logic density, while the 24-pin TSSOP footprint keeps the implementation close to the controlled interface signals. The 15 ns grade is relevant where moderate propagation delay must be included in an interface budget, and the 3.3 V nominal supply matches many embedded systems. Check every programming and I/O pin against the datasheet, and use the flash-programmed configuration only after validating the logic equations and timing.
추천
Compact State Machine Control
The ATF22LV10C-15XC can implement compact finite-state machines, sequence detectors, and mode controllers where the required state count and Boolean complexity fit within 10 macrocells. The variable product-term architecture allows outputs to use 8 to 16 terms, which supports flexible equation development for registered and combinational functions. Its electrically erasable flash configuration makes it useful during control-panel or mechanism prototyping because state logic can be updated without replacing the device. Validate worst-case path delay at the actual 3.0 V to 5.5 V supply condition and include clock, reset, and unused-pin requirements in the design review.
추천
Low-Power Peripheral Power Control
The ATF22LV10C-15XC can supervise peripheral enables, isolation signals, and low-power mode transitions in a compact embedded system. Its user-controlled power-down function reduces standby current to 10 µA typical, making the device useful when a logic block must remain available but avoid continuous active power. The 3.0 V to 5.5 V range allows operation from common embedded rails, and the 24-pin TSSOP package supports a small controller board. External sequencing must ensure that power-down requests do not create invalid bus states or unintended output transitions during startup and wake-up.
추천
Legacy System Logic Consolidation
The ATF22LV10C-15XC can replace a collection of discrete gates or multiple simple PLDs in a legacy control system, reducing component count and simplifying board inventory. Its 10 macrocells provide 500 equivalent gates, and flash memory allows the logic map to be revised without physically replacing the package during maintenance or production updates. The commercial-temperature -XC ordering code should be used only when environmental exposure remains within its specified rating; an industrial-grade option may be required for harsher installations. Validate legacy voltage levels, pin assignments, and timing before converting an existing board.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATF22LV10C-15XC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATF22LV10C-10XC | ATF22LV10C-20XC | ATF22LV10C-25XC | ATF22LV10C-15XQ |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP |
| Propagation-Delay Grade | 15 ns | 10 ns | 20 ns | 25 ns | 15 ns |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Equivalent Gate Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Programmable Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory |
| Power-Down Control | User-controlled | User-controlled | User-controlled | User-controlled | User-controlled |
| Product Terms per Output | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms |
주요 차별점
- Balanced speed and compact capacity (vs ATF22LV10C-10XC)
- Commercial-temperature target option (vs ATF22LV10C-15XQ)
- Ten-macrocell flash-programmable architecture (vs ATF22LV10C-25XC)
설계 노트
Use the 24-pin TSSOP land pattern from the manufacturer package drawing and preserve the standard pin-1 orientation. Keep the device close to the nets implementing decode and control functions to minimize propagation delay and reduce susceptibility to board-level noise. Place the programming interface away from sensitive signal paths where practical, and check unused pins against the datasheet’s required termination or configuration instructions.
Decouple the 3.3 V supply close to the device and validate operation across the permitted 3.0 V to 5.5 V range. If power-down is used, guarantee that the control signal has a defined state during reset and startup. The family’s 10 µA typical standby current applies to the user-controlled power-down mode; board-level leakage, pull resistors, programmer circuitry, and connected peripherals may increase the total system standby demand.
Do not treat a faster or slower speed suffix as an automatic drop-in qualification. Compare the package, temperature grade, supply voltage, programming method, pin functions, and worst-case timing for every selected ATF22LV10C ordering code. When upgrading from the 15 ns device to a 10 ns version, confirm that the programmed configuration is accepted and verify downstream timing rather than assuming that only the speed rating changed.
규정 준수 정보
Compliance status was not stated in the cited technical or distribution records. AEC-Q100 is not applicable because this is a programmable logic device rather than an automotive-qualified component.