ATF22V10CQZ-20PC - 10-Macrocell CMOS PLD | Microchip
MPN: ATF22V10CQZ-20PC ✓ সক্রিয়ATF22V10CQZ-20PC সারাংশ
A programmable logic device is a semiconductor that stores a configurable Boolean logic function. The ATF22V10CQZ belongs to the PLD family, within the broader logic IC and semiconductor hierarchies. Its ten outputs are each allocated 8 to 16 product terms, making it useful for implementing compact combinatorial and registered control logic where a conventional gate array would be unnecessary.
The ATF22V10CQZ family incorporates a superset of the generic 22V10 architecture and supports direct replacement of 22V10 devices and most 24-pin combinatorial PLDs. Three operating modes are selected automatically by configuration software. The family also provides high-speed operation, with speeds down to 12 ns across its supported speed ranges, while the -20PC suffix identifies a 20 ns device in the 24-pin PDIP configuration.
Each output is implemented using product terms, while the device architecture supports simple combinational functions as well as more complex sequential logic. The electrically erasable flash-memory process retains programmed data without the complexity of a volatile configuration scheme and supports repeated in-circuit programming using the manufacturer’s recommended programming system.
Typical uses include legacy industrial control, interface decoding, state-machine logic, data routing, and compact glue logic for older processor or peripheral systems. The ATF22V10CQZ-20PC is especially relevant to equipment that was designed around 24-pin DIP PLDs and requires a nonvolatile, reprogrammable logic implementation.
For new PCB layouts, verify the complete pin assignment and programming requirements against the manufacturer datasheet before ordering. Existing 24-pin PLD boards should also be checked for supply voltage, timing, and pin-function compatibility. Because the device is a legacy-style PLD, software support and long-term availability should be confirmed before committing to a large redesign.
This page combines the manufacturer’s device architecture information, package and application context, drop-in family alternatives, and practical selection guidance to help engineers determine whether the ATF22V10CQZ-20PC can be used without changing an existing 24-pin logic design.
এর জন্য ড্রপ-ইন বিকল্প ATF22V10CQZ-20PC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ATF22V10CZ-20PC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22V10CZ-15PC
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22V10CZ-25PC
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22V10CQZ-20PI
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22V10CZ-20PI
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATF22V10CQZ-20PC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Electrically erasable CMOS programmable logic device |
| Macrocells | 10 macrocells |
| Outputs | 10 outputs |
| Product Terms per Output | 8 to 16 product terms per output |
| Target Speed Grade | 20 ns |
| Family Maximum Speed | 12 ns |
| সাপ্লাই ভোল্টেজ | 5 V |
| Logic Gate Capacity | 500 gates |
| Configuration Memory Technology | Electrically erasable flash memory |
| Process Technology | CMOS |
| Operating Modes | 3 automatically selected modes |
| Architecture | Superset of generic 22V10 and most 24-pin combinatorial PLDs |
| Standby Power | 0 W |
| প্যাকেজ | 24-pin PDIP |
| মাউন্টিং টাইপ | Through-hole |
| পিন সংখ্যা | 24 pins |
| Programming | Electrically erasable and reprogrammable |
ATF22V10CQZ-20PC 24-pin pdip পিন কনফিগারেশন গাইড
ATF22V10CQZ-20PC (24-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATF22V10CQZ-20PC.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATF22V10CQZ-20PC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Legacy Industrial Control Logic, Interface Signal Decoding, State Machine and Sequence Control, Data Routing and Signal Conditioning, Instrument Control and Measurement, Field-Programmable System Maintenance.
Legacy Industrial Control Logic
The ATF22V10CQZ-20PC fits compact legacy control boards that require several Boolean equations, state transitions, and output interlocks without the component count of discrete gate logic. Its 10 macrocells and 10 outputs provide 8 to 16 product terms per output, while the 20 ns speed grade supports common control and sequencing paths. The electrically erasable flash configuration allows a logic revision to be loaded during maintenance without replacing the IC. For an existing 24-pin PDIP PCB, the DIP package simplifies mechanical replacement, but designers should verify operating temperature, timing margins, and the programmed mode against the manufacturer datasheet.
সুপারিশকৃত
Interface Signal Decoding
The ATF22V10CQZ-20PC is useful for decoding address, command, status, or interlock signals where compact combinational logic is needed at the edge of a controller. Ten outputs with 8 to 16 product terms each allow address qualification, active-high or active-low decoding, and output masking to be consolidated into one device. Its 5 V CMOS operation matches established 5 V logic systems, while the 20 ns speed rating provides deterministic propagation timing for moderate-speed buses. Designers should include the device’s output-disable behavior and programmed operating mode in the interface timing analysis rather than treating it as an unstructured combinational gate array.
সুপারিশকৃত
State Machine and Sequence Control
A small state machine can be implemented in the ATF22V10CQZ-20PC when the design needs more structured behavior than simple combinational decoding but does not justify a microcontroller. The device provides three automatically selected operating modes and 10 configurable outputs, allowing state variables, transition conditions, and output actions to share one programmable logic package. Its 20 ns speed grade is appropriate for many control loops and handshake circuits operating well below modern processor speeds. The 24-pin PDIP package also makes the device practical for repair-oriented legacy equipment. Validation should include reset behavior, unused-pin treatment, propagation delay, and reprogramming procedures specified by Microchip Technology.
সুপারিশকৃত
Data Routing and Signal Conditioning
The ATF22V10CQZ-20PC can implement small routing, mux, latch, and polarity-conversion functions between slower legacy subsystems. Its electrically erasable flash configuration supports design iterations by allowing the logic equations to be updated without changing the PCB, while zero standby power dissipation is useful in continuously powered control equipment. The 20 ns timing grade helps preserve data validity in moderate-speed control paths. Because the same physical package supports several automatically selected modes, engineers should review the configuration documentation for enable, feedback, and output-control behavior. Signal-integrity checks should include grounding, supply decoupling, and rise-time limitations of the legacy CMOS outputs.
সুপারিশকৃত
Instrument Control and Measurement
The ATF22V10CQZ-20PC can implement front-panel sequencing, range selection, relay-control interlocks, and status decoding in legacy test and measurement equipment. Ten outputs are sufficient for coordinating multiple instrument functions, while 8 to 16 product terms per output support practical Boolean conditions. The 24-pin PDIP package suits repairable instruments and through-hole prototype assemblies, and the 20 ns speed grade handles control paths without introducing the resource demand of a larger FPGA. Engineers should verify supply tolerances, input thresholds, output leakage, and thermal limits against the manufacturer electrical tables before using the device in precision measurement systems.
সুপারিশকৃত
Field-Programmable System Maintenance
The ATF22V10CQZ-20PC is well suited to maintenance-oriented systems in which board-level logic must be revised during product support. Electrically erasable flash memory permits the configured logic to be reprogrammed, reducing the need to stock a different PLD for each firmware revision. The 10-macrocell architecture supports compact configuration corrections, while the 24-pin PDIP footprint makes mechanical replacement straightforward on existing boards. A controlled revision process should retain the original configuration file, programming-equivalent settings, and validation record. This approach is most appropriate for legacy equipment; new projects should also evaluate whether an MCU or CPLD provides better long-term tooling, documentation, and lifecycle support.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATF22V10CQZ-20PC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ATF22V10CZ-20PC | ATF22V10CZ-15PC | ATF22V10CZ-25PC | ATF22V10CQZ-20PI | ATF22V10CZ-20PI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP |
| Device Type | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs |
| Product Terms per Output | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms | 8 to 16 product terms |
| Speed Grade | 20 ns | 20 ns | 15 ns | 25 ns | 20 ns | 20 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Technology | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
মূল পার্থক্যসমূহ
- Direct 24-pin DIP family replacement without changing the PCB footprint (বনামATF22V10CQZ-20PI)
- Exact 20 ns speed-grade match (বনামATF22V10CZ-15PC)
- Lower nominal propagation delay than a 25 ns replacement (বনামATF22V10CZ-25PC)
- Nonvolatile, reprogrammable configuration for maintainable legacy designs (বনামATF22V10CZ-20PC)
ডিজাইন নোট
Design the board around the manufacturer’s 24-pin PDIP footprint and verify every signal against the ATF22V10C(Q)Z pin-description table. Legacy PLDs can assign several pins differently depending on the programmed mode, so do not infer enable, feedback, clock, or output-control functions from a generic logic symbol. Keep the PCB modifications and programming documentation under configuration control, because a mechanically compatible replacement may require a different fuse or configuration file.
Place the required supply-decoupling capacitor close to the 5 V and ground pins, and follow the manufacturer’s recommended network and layout. The device’s zero standby power specification does not eliminate dynamic switching current or supply-transient requirements. When replacing an existing board, inspect electrolytic capacitors and contaminated sockets because aging in legacy equipment can produce voltage excursions that affect a new PLD even when the original logic margin was adequate.
Do not select a substitute solely from the package drawing. Confirm pin functions, operating mode, speed grade, supply limits, temperature range, and whether the original device was factory programmed. For ATF22V10CZ-15PC or ATF22V10CZ-25PC substitutions, check worst-case timing rather than assuming a faster part always passes and a slower part always fails. Preserve the original programming file and validate the complete board after reprogramming.
Use short, direct traces for the PLD and avoid routing high-current or high-edge-rate signals adjacent to input pins and configuration lines. Legacy through-hole boards may have long loops that increase susceptibility to coupling, so inspect continuity, solder-joint integrity, and grounding during repair. If the board is refreshed, maintain a solid ground plane, decouple the supply locally, and keep programming or test access available for lifecycle maintenance.
কমপ্লায়েন্স তথ্য
The manufacturer product page and datasheet excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a legacy programmable logic device rather than an automotive-qualified device.